Tag Archives: hot selling air compressor

China Hot selling Class Zero Oil-Free Silent Medical Screw Air Compressor with Rotorcomp Airend air compressor repair near me

Product Description

Class Zero Oil-Free Silent Medical Screw Air Compressor with Rotorcomp Airend

The ETC oil-free conversion technology opens up completely new possibilities for providing oil free compressed air in meeting with ISO 8573-1 Class 0 quality standard.

When it comes to holding down up-front operational costs, converter technology is ideally suited for the provision of entirely oil free compressed air. And it is dependable too: Penetration of oil into the compressed air network is absolutely impossible!

Operating costs are extremely low because no costly checkups are required. Commonly occurring risks such as oil penetration have been discarded, and frequent replacement of component elements as with filters has been completely eliminated.

Features of CHINAMFG ETC Series Oil Free Rotary Screw Air Compressor
1. Air quality to ISO8573-1 Class 0 standard with TUV certificate on request
2. Proven Eco-Tec Oil Free Converter technology from Germany and over thousands successful installation reference worldwide
3. Single stage airend design for easy and cost saving maintenance
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN standards
5. Modern concept suction valve with energy saving modulation control as option
6. Intelligent PLC control panel with sequential / remote control functions
7. Reliable automatic control box with “Siemens” contactors
8. High efficiency aftercooler (air- or water- cooled available)

Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air.

The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment.

Oil/hydrogen concentration is below 0,0571 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential.

ADEKOM (ASIA PACIFIC) LIMITED founded in the late 90’s is a specialized air/gas compressors and treatment system manufacturer with headquarter in Hong Kong. Its partners located in Vicenza, Italy and Germering, Germany are the world’s leading manufacturers with global recognition and experience in designing, manufacturing and marketing of rotary screw air/gas compressors for decades. QUALITY, RELIABILITY and ENERGY EFFICIENCY have been the main objectives of serving customers all over the world. CHINAMFG follows the company core of its European partners, is committed to the research & development, quality assurance and satisfaction of customers’ needs. Today, what CHINAMFG can do is not just to supply the best products to the market, but to provide THE TOTAL SOLUTION TO YOUR NEEDS!

CONTACT US

Asia Pacific Market: Spencer Lau (Ms.)

European/ Middle Eastern/ African Market: Echo Lok (Ms.)

American Market: Alice Kwok (Ms.)

Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Angular
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

China Hot selling Class Zero Oil-Free Silent Medical Screw Air Compressor with Rotorcomp Airend air compressor repair near me
editor by CX 2023-12-05

China best 318cfm Screw Mobile Diesel Portable Driven Air Compressor For Sale with Hot selling

Product Description

7-35 Bar Industrial Heavy Duty High Pressure Oil Injected Direct Driven Diesel Engine Portable Mobile Rotary Screw Type Air Compressor Advantages

Use Germany KAPP machine and German manufacturing technique to process the compression element, the components manufactured to the highest standards and precision aligned roller-bearings ensure long service life with maximum reliability.

Heavy-duty CHINAMFG diesel engine for extended operation.

Excellent components, for example, Germany CHINAMFG oil filter and CHINAMFG electronics for high performance.

Automatic operation system helps the operator to master the operating skills quickly, unattended operation and remote control are available.

Conform to CE, ISO9001 and energy saving certification, etc.

Applications: mining, hydropower, oil and gas exploitation, borehole, shipyard, construction, chemical industry, quarry, sandblasting, pipeline pressure test, public works, etc.

DENAIR Certification

The Technical Parameter Of Diesel Engine Portable Rotary Screw Air Compressor

DENAIR hot sale series diesel portable air compressors
Model	Machine						Diesel Engine
	Free Air Delivery		Normal Working Pressure		Dimensions (without towbar)	Weight	Manufacturer	Model	Rated power
	Free Air Delivery		Normal Working Pressure		Dimensions (without towbar)	Weight			Rated power
	m3/min	CFM	bar(e)	psig	LWH(mm)	kg			KW
DACY-3.2/8	3.98	140	8	116	226515901575	900	yangdong	YSD490G	32
DACY-5/7	5.72	202	7	102	307519002040	1350	Cummins	QSB3.9-C80-31	60
DACY-6/7	5.72	202	7	102	307519002040	1350		QSB3.9-C80-31	60
DACY-7.5/7	7.50	265	7	102	307519002040	1350		QSB3.9-C80-31	60
DACY-12/7	12.00	424	7	102	322020002355	1700		QSB3.9-C130-31	96
DACY- 8.5/10	10.28	363	10	145	322020002355	1700		QSB3.9-C130-31	96
DACY-13/8	13.00	459	8	116	353020902325	2050		QSB5.9-C150-31	113
DACY-11/10	11.27	398	10	145	353020902325	2050		QSB5.9-C150-31	113
DACY-10/13	10.05	355	13	189	353020902325	2050		QSB5.9-C150-31	113
DACY-9/14	9.00	318	14	203	353020902325	2050		QSB5.9-C150-31	113
DACY-14/12	14.00	494	12	175	340017702670	3600		QSB5.9-C180-31	132
DACY-10/20	12.52	442	20	290	340017702670	4000		QSC8.3-C215-30	160
DACY-22.5/14G	22.50	794	14	203	382019802680	4400		QSL8.9-C325-30	239
DACY-22/20	22.00	777	20	290	400023002750	5500		QSL8.9-C360-30	264
DACY-32/10	32.00	1130	10	145	472021603200	5500		QSZ13-C400-30	298
DACY-45/10	47.77	1687	10	145	472021603200	6500		QSB5.9-C150-31	415
DACY-33/35	33.48	1182	35	508	451021603170	6900		KTA19-P700	522
*)Free air delivery in accordance with ISO 1217 :2009, Annex C: Absolute intake pressure 1 bar(a), cooling and air take tempetature 20 ºC. Note: Skid-mounted type is available.

*) Specifications are subject to change without prior notice
40 more models, pls inquire to us online!

DENAIR Factory

DENAIR Hannover Messe 2017

DENAIR Diesel Portable Air Compressor Packing

We carefully selected for you the classic case

DENAIR Diesel Portable Air Compressor in Thailand

Project Name: Tunnel construction in Chiengmai, Thailand

Product Name: 10m3/min 13bar & 17m3/min 13bar diesel portable screw air compressor

Model No. & Qty: DACY-10/13 x 1, DACY-17/13 x 2

Working Time: From November, 2015 till now

Event: From November 18 to 24th, 2015, DENAIR service team Allen, Gao zhingmeng and CHINAMFG visited our VIP customer in Chiengmai, Thailand for Installation guide, commissioning & technical training for diesel portable air compressors. The 3 units of air compressor are used for supporting the drilling rigs. DENAIR professional service team and reliable products impressed on the customers at the working site.

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2: Our company is located in No. 6767, Tingfeng Rd. Xihu (West Lake) Dis.n District, ZheJiang 201502, China
And our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

Warranty:	2 Years
Lubrication Style:	Lubricated or Oil-Less
Cooling System:	Air Cooling/Water Cooling

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How does variable speed drive technology improve air compressor efficiency?

Variable Speed Drive (VSD) technology improves air compressor efficiency by allowing the compressor to adjust its motor speed to match the compressed air demand. This technology offers several benefits that contribute to energy savings and enhanced overall system efficiency. Here’s how VSD technology improves air compressor efficiency:

1. Matching Air Demand:

Air compressors equipped with VSD technology can vary the motor speed to precisely match the required compressed air output. Traditional fixed-speed compressors operate at a constant speed regardless of the actual demand, leading to energy wastage during periods of lower air demand. VSD compressors, on the other hand, ramp up or down the motor speed to deliver the necessary amount of compressed air, ensuring optimal energy utilization.

2. Reduced Unloaded Running Time:

Fixed-speed compressors often run unloaded during periods of low demand, where they continue to consume energy without producing compressed air. VSD technology eliminates or significantly reduces this unloaded running time by adjusting the motor speed to closely follow the air demand. As a result, VSD compressors minimize energy wastage during idle periods, leading to improved efficiency.

3. Soft Starting:

Traditional fixed-speed compressors experience high inrush currents during startup, which can strain the electrical system and cause voltage dips. VSD compressors utilize soft starting capabilities, gradually ramping up the motor speed instead of instantly reaching full speed. This soft starting feature reduces mechanical and electrical stress, ensuring a smooth and controlled startup, and minimizing energy spikes.

4. Energy Savings at Partial Load:

In many applications, compressed air demand varies throughout the day or during different production cycles. VSD compressors excel in such scenarios by operating at lower speeds during periods of lower demand. Since power consumption is proportional to motor speed, running the compressor at reduced speeds significantly reduces energy consumption compared to fixed-speed compressors that operate at a constant speed regardless of the demand.

5. Elimination of On/Off Cycling:

Fixed-speed compressors often use on/off cycling to adjust the compressed air output. This cycling can result in frequent starts and stops, which consume more energy and cause mechanical wear. VSD compressors eliminate the need for on/off cycling by continuously adjusting the motor speed to meet the demand. By operating at a consistent speed within the required range, VSD compressors minimize energy losses associated with frequent cycling.

6. Enhanced System Control:

VSD compressors offer advanced control capabilities, allowing for precise monitoring and adjustment of the compressed air system. These systems can integrate with sensors and control algorithms to maintain optimal system pressure, minimize pressure fluctuations, and prevent excessive energy consumption. The ability to fine-tune the compressor’s output based on real-time demand contributes to improved overall system efficiency.

By utilizing variable speed drive technology, air compressors can achieve significant energy savings, reduce operational costs, and enhance their environmental sustainability by minimizing energy wastage and optimizing efficiency.

air compressor

Can air compressors be integrated into automated systems?

Yes, air compressors can be integrated into automated systems, providing a reliable and versatile source of compressed air for various applications. Here’s a detailed explanation of how air compressors can be integrated into automated systems:

Pneumatic Automation:

Air compressors are commonly used in pneumatic automation systems, where compressed air is utilized to power and control automated machinery and equipment. Pneumatic systems rely on the controlled release of compressed air to generate linear or rotational motion, actuating valves, cylinders, and other pneumatic components. By integrating an air compressor into the system, a continuous supply of compressed air is available to power the automation process.

Control and Regulation:

In automated systems, air compressors are often connected to a control and regulation system to manage the compressed air supply. This system includes components such as pressure regulators, valves, and sensors to monitor and adjust the air pressure, flow, and distribution. The control system ensures that the air compressor operates within the desired parameters and provides the appropriate amount of compressed air to different parts of the automated system as needed.

Sequential Operations:

Integration of air compressors into automated systems enables sequential operations to be carried out efficiently. Compressed air can be used to control the timing and sequencing of different pneumatic components, ensuring that the automated system performs tasks in the desired order and with precise timing. This is particularly useful in manufacturing and assembly processes where precise coordination of pneumatic actuators is required.

Energy Efficiency:

Air compressors can contribute to energy-efficient automation systems. By incorporating energy-saving features such as Variable Speed Drive (VSD) technology, air compressors can adjust their power output according to the demand, reducing energy consumption during periods of low activity. Additionally, efficient control and regulation systems help optimize the use of compressed air, minimizing waste and improving overall energy efficiency.

Monitoring and Diagnostics:

Integration of air compressors into automated systems often includes monitoring and diagnostic capabilities. Sensors and monitoring devices can be installed to collect data on parameters such as air pressure, temperature, and system performance. This information can be used for real-time monitoring, preventive maintenance, and troubleshooting, ensuring the reliable operation of the automated system.

When integrating air compressors into automated systems, it is crucial to consider factors such as the specific requirements of the automation process, the desired air pressure and volume, and the compatibility of the compressor with the control and regulation system. Consulting with experts in automation and compressed air systems can help in designing an efficient and reliable integration.

In summary, air compressors can be seamlessly integrated into automated systems, providing the necessary compressed air to power and control pneumatic components, enabling sequential operations, and contributing to energy-efficient automation processes.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China best 318cfm Screw Mobile Diesel Portable Driven Air Compressor For Sale with Hot selling
editor by CX 2023-12-05

China Hot selling 3.7kw Pulley Driven Oil-Free Scroll Air Compressor Module manufacturer

Product Description

Specifications
Characteristics of vehicle-mounted oil-free scroll air compressor
Oil-free and safe: the compressed air is completely free of oil and water. There is no need to worry about the hidden dangers of oil emulsification, oil leakage, fire, and oil shortage braking, which greatly improves the safety performance
Energy-saving, high efficiency, and simple maintenance: the unique structural design makes the compression process without energy waste, with few parts, high manufacturing accuracy, no vulnerable parts, and very low maintenance cost
Intelligent: intelligent information feedback helps the intelligent control system and improves vehicle safety
High environmental adaptability: it can operate reliably under extreme climatic conditions from – 40 ºC to + 65 ºC
Mute: the oil-free scroll air compressor has small torque variation and no complex motion structure, so it has low noise, low vibration, more quiet and comfortable.

flow from 60L/min-600L/min

Items	Unit	Parameters
Volume flow	m3/min	0.4
Work pressure	MPa	0.8~1
power	kw	4
Motor protection grade		IP67
Power	V	380AC
Transmission way		Direct connection (coupling)
Exhaust temperature	ºC	≤85ºC( After radiator)
Oil content standard of the outlet gas		Class 0
Dimension(Length×Width×High)	mm	695×420×430

RFQ:

1) MOQ
MOQ is 200pcs for customization. Stock mold can be in lower quantity as your request.

2). Item of payment
a. T/T:40% deposit, 60% balance after passing QC inspected before shipping.
b. Paypal
c. Western Union
3). Samples?
If we have a stock sample, we’d like to send it to you immediately, If you need to make your own style, it will cause the sample charge, We will refundable the sample charge to you if your order quantity is up to 3000pcs.
4).sample time?
Depending on your request, as usual, It will take about 6-7 workdays to make the new sample as your need
5). Mass product time?
It takes about 23 days for 1000pcs.
6).freight charge for mass products?
It will base on your request, saying: small order, we’d like to advise you shipping by express will be favorable, You can choose by sea or Air, the freight charge will be based on the date when you place an order.
Our Services
1. QC workers will inspect each process 100%, Guarantee the quality.
2. After-sales service available.
3. OEM & ODM designer team available.
4. Professional knowledge of famous brand items.
5. Professional sales team, All of your emails will be replied with 12 hours

Company Information

HangZhou CHINAMFG Industrial Co., Ltd is a professional vehicle HVAC/Compressor supplier in ZheJiang Province, China. We′re specializes in transport compressors such as electric vehicle air-conditioner scroll compressor, 12/24VDC electric compressor for truck additional air conditioner, compact horizontal hermetic scroll compressor for E-bus, subway, etc.
We also provide customers with vehicle air conditioning system solutions and products, such as a 12 / 24 VDC truck cab with no idle air conditioning system, locomotive cab air conditioning system, RV air conditioning system, etc.
Our technical team has gained a good reputation in the field of electric vehicles, electric buses, and rail transit. Our products have surpassed their counterparts from the US and Japan in some special parameters, High efficiency, reliability, and compactness.
Our products are suitable for many different refrigerants, including R134A, R407C, R410A, ETC. Our annual output is 500, 000 PCS of EV-use semi-hermetic scroll compressors, 50, 000 PCS of hermetic horizontal inverter compressors.20000PCS of cab air conditioning.
We not only supply products but also provide comprehensive application guidance and technical support for our clients.
Our compressor driver is provided by our group company, which has many years of experience in automotive air conditioning control systems and mobile cold chain control systems. This is an advantage that other compressor companies do not have. The group has a number of R & D service institutions in Europe Company.
The business concept is Quality, Innovation, High-Efficiency, and Credit. Warmest welcome to your visit. Looking CHINAMFG to working with you!

After-sales Service:	3 Years
Warranty:	3 Years
Classification:	Variable Capacity
Job Classification:	Scroll Type
Transmission Power:	Dynamoelectric
Cooling Method:	Air-cooled

Customization:	Available \|

air compressor

How Do Water-Lubricated Air Compressors Impact Compressed Air Quality?

Water-lubricated air compressors can have an impact on the quality of the compressed air they produce. Here’s a detailed explanation of how water-lubricated air compressors can affect compressed air quality:

Moisture Content:

Condensation: Water-lubricated compressors introduce moisture into the compressed air system. During the compression process, as the air cools downstream, moisture can condense and accumulate. This moisture can lead to issues such as corrosion, rust, and contamination of downstream equipment or processes.
Water Carryover: If the compressor’s water separation mechanisms are not efficient or if there are malfunctions in the water removal systems, water droplets or mist may carry over into the compressed air. This can negatively impact the quality of the compressed air and introduce moisture-related issues downstream.

Contamination:

Oil Contamination: In some water-lubricated compressors, there is a potential for oil to mix with the water used for lubrication. If oil and water emulsify or if there are leaks in the compressor system, oil contamination may occur. Oil-contaminated compressed air can have adverse effects on downstream processes, equipment, and products. It can lead to contamination, reduced performance of pneumatic components, and potential health and safety concerns.
Particulate Contamination: Water-lubricated compressors can introduce particulate matter, such as sediment, debris, or rust, into the compressed air system. This can occur if the water supply or water treatment systems are not adequately filtered or maintained. Particulate contamination can clog or damage pneumatic equipment, affect product quality, and cause operational issues in downstream applications.

Preventive Measures:

Water Separation: Water-lubricated compressors employ various water separation mechanisms to remove moisture from the compressed air. This includes moisture separators, water traps, or coalescing filters that are specifically designed to capture and remove water droplets or mist from the compressed air stream. Regular maintenance and inspection of these separation systems are necessary to ensure their proper functioning.
Air Treatment: Additional air treatment components, such as air dryers or desiccant systems, can be installed downstream of water-lubricated compressors to further reduce moisture content in the compressed air. These systems help to remove moisture that may have carried over from the compressor and ensure that the compressed air meets the required dryness standards for specific applications.
Proper Maintenance: Regular maintenance of water-lubricated compressors is essential to minimize the potential impact on compressed air quality. This includes routine inspection, cleaning, and replacement of filters, lubrication systems, and water separation components. Addressing any leaks, malfunctioning components, or system issues promptly can help maintain the integrity of the compressed air and prevent contamination or excessive moisture levels.

By implementing appropriate water separation mechanisms, air treatment systems, and maintenance practices, the impact of water-lubricated air compressors on compressed air quality can be minimized. It is important to consider the specific requirements of the application and follow industry standards and guidelines to ensure the desired compressed air quality is achieved.

air compressor

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

Water-lubricated air compressors find various applications in the automotive industry. Here’s a detailed explanation of how they are used in automotive applications:

Tire Inflation:

Service Stations: Water-lubricated air compressors are commonly used in automotive service stations for tire inflation. They provide a reliable source of compressed air for quickly and efficiently inflating tires to the recommended pressure. The water lubrication system in these compressors helps to reduce friction and wear on internal components, ensuring smooth operation and extended lifespan.
Tire Shops: Tire shops often utilize water-lubricated air compressors as part of their tire service equipment. These compressors can supply compressed air for tire inflation, tire mounting and demounting machines, and other pneumatic tools used in tire service and maintenance.

Painting and Finishing:

Spray Painting: Water-lubricated air compressors are also used in automotive painting and finishing processes. Compressed air is used to power spray guns that apply paint or coatings to vehicles during the painting process. The water lubrication system helps maintain the cleanliness of the compressor and prevents oil contamination, ensuring high-quality paint finishes.
Sanding and Polishing: Compressed air is often used for sanding and polishing automotive surfaces. Water-lubricated air compressors provide a reliable source of compressed air for pneumatic sanders, polishers, and other air-powered tools used in automotive surface preparation and refinishing.

Brake and Suspension Systems:

Brake Bleeding: Water-lubricated air compressors can be used during brake bleeding procedures in automotive repair and maintenance. Compressed air is used to purge air bubbles from the brake system, ensuring optimal brake performance and pedal feel. The water lubrication system helps maintain the purity of the compressed air, preventing contamination that could affect the brake system’s functionality.
Suspension Systems: Air suspension systems in vehicles often rely on compressed air for operation. Water-lubricated air compressors provide a continuous supply of clean and lubricated compressed air for inflating and maintaining the air springs or airbags used in vehicle suspensions.

Diagnostic and Testing Equipment:

Diagnostic Tools: Water-lubricated air compressors are utilized in automotive diagnostic and testing equipment. Compressed air is used to operate pneumatic diagnostic tools, such as vacuum testers, pressure gauges, and leak detectors, that help diagnose and troubleshoot various vehicle systems.
Testing and Calibration: Automotive testing and calibration equipment, such as dynamometers and emission testing devices, often require a source of compressed air. Water-lubricated air compressors supply the necessary compressed air for precise and accurate testing of vehicle performance, emissions, and other parameters.

Overall, water-lubricated air compressors play a significant role in various automotive applications, including tire inflation, painting and finishing, brake and suspension systems, and diagnostic and testing equipment. Their use helps ensure efficient and reliable operation, improved productivity, and high-quality results in automotive service, repair, and manufacturing processes.

air compressor

How does a water lubrication system work in air compressors?

A water lubrication system in air compressors is designed to provide lubrication and cooling to the internal components of the compressor using water as the lubricant. This system offers an alternative to traditional oil lubrication systems and has specific advantages in certain applications. Here’s a detailed explanation of how a water lubrication system works in air compressors:

1. Water Injection:

In a water lubrication system, a controlled amount of water is injected into the compression chamber of the air compressor. This can be achieved through various methods, such as direct injection or atomization of water droplets.

2. Lubrication:

As the compressed air is generated, the injected water serves as a lubricant for the internal components of the compressor. The water forms a thin film on the surfaces, reducing friction and wear between the moving parts. This lubrication helps to improve the efficiency and lifespan of the compressor.

3. Cooling:

The water injected into the compression chamber also acts as a cooling medium. As the air is compressed, heat is generated, and the injected water absorbs some of this heat. The water carries away the heat, preventing excessive temperature rise and maintaining optimal operating conditions for the compressor.

4. Separation and Filtration:

After serving its lubrication and cooling purposes, the water needs to be separated from the compressed air. The compressed air and water mixture pass through a separator or filtration system, which separates the water from the compressed air. This can involve mechanisms such as centrifugal force, gravity separation, or filtration media.

5. Water Treatment:

In water lubrication systems, proper water treatment is essential to maintain the quality and performance of the system. Water filtration and purification processes are employed to remove impurities, contaminants, and any solid particles present in the water. This ensures that the injected water is clean and free from any substances that could potentially harm the compressor or the downstream air system.

6. Recirculation or Discharge:

Depending on the specific design of the water lubrication system, the separated water can be recirculated back into the system for reuse or discharged from the compressor. Recirculation systems involve the treatment and filtration of the water before reintroducing it into the compression chamber. Discharge systems, on the other hand, may involve further treatment or disposal of the water in an environmentally responsible manner.

By utilizing a water lubrication system, air compressors can benefit from reduced oil consumption, improved air quality, and enhanced energy efficiency. These systems are commonly employed in industries where oil contamination must be avoided, such as food processing, pharmaceutical manufacturing, and electronics production.

China Hot selling 3.7kw Pulley Driven Oil-Free Scroll Air Compressor Module manufacturer
editor by CX 2023-12-01

China Hot selling Hot Sale 612630030405 CHINAMFG Wp12 Auto Spare Heavy Truck Part Air Compressor for Sintoruck CHINAMFG CHINAMFG Air Compressor air compressor for sale

Product Description

Main engine Parts:
Cylinder Block, Cylinder Block Ass, Crankshaft and Flywheel, Connecting Rod and Piston, Cylinder Head, Valve-Gear Mechanism, Cooling System & Front Bracket, Oil Pump and Oil Filter, Fuel Supply System Subgroup, Intake Manifold and Exhaust Manifold, Engine,Starter & Sensor, Compressor, Oil Pan,(M+H)/Fuel Filter, Generator, Brackets, Bolts and Nuts, Bearing, Oil Seal, Rings, Belts, Valves, Main Bearing Bush, Thrust Bush, etc

19 Gasket
Q150B10130 Hexagon head bolt
VG1407 Needle roller
VG260571267 Oil separator
1-1 Connect piece

Detailed Photos

Cooperative Brand

Packaging & Shipping

Company Profile

HangZhou CHINAMFG Technology Co.,Ltd. is located in ZheJiang . It has a registered
capital of 5 million and has been in the company for 10 years. Here, we always provide customers with good products and technical support, and sound after-sales service. We supply many parts for diesel engine including Weichai, Shangchai, Yuchai, Deutz.
We have always pursued the concept of sincere cooperation, coordinated development, and CHINAMFG excellence, and pursue long-term and outstanding achievements. We have successfully provided global customers with high-quality technical services and timely spare parts supply, and have established stable cooperative relations with customers in North Africa, Central Africa, Southeast Asia, the Middle East, Latin America and other regions. Seek long-term partnerships with global business partners and better serve our customers in the future. We have good products and a professional sales and technical team. Our company belongs to Jiansgu general parts manufacturing supporting manufacturers benchmarking and machinery repair industry yellow pages industry. If you are interested in our company’s products and services, we look CHINAMFG to your online message or call for consultation.

Exhibition

Certifications

Our Advantages

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 15 to 30 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

Certification:	CCC, COP, ISO9001, CE, E-Mark, RoHS, TS16949
Standard Component:	Standard Component
Technics:	Press
Material:	Standard
Type:	Engine
Product Name:	Engine Spare Part

Samples:	US$ 1.00/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

1. Compact and Lightweight:

2. High Efficiency:

3. Quiet Operation:

4. Oil Lubrication:

5. Versatile Applications:

6. Easy Maintenance:

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

How do you maintain proper air quality in compressed air systems?

Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

1. Air Filtration:

Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

2. Moisture Control:

Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

3. Oil Removal:

If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

4. Regular Maintenance:

Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

5. Air Receiver Tank Maintenance:

Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

6. Air Quality Testing:

Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

7. Education and Training:

Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

8. Documentation and Record-Keeping:

Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

air compressor

What maintenance is required for air compressors?

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

China Hot selling Hot Sale 612630030405 CHINAMFG Wp12 Auto Spare Heavy Truck Part Air Compressor for Sintoruck CHINAMFG CHINAMFG Air Compressor air compressor for sale
editor by CX 2023-11-28

China Hot selling Small Size Silent Air Compressor air compressor for sale

Product Description

We are the manufacturer for side channel blowers (also called regenerative blower, ring blower, air pump), located in HangZhou, ZHangZhoug, China, which is near HangZhou and ZheJiang port. Our company is specialized in producing the high pressure and efficiency side channel blowers.

The air flow capabilities of our blowers range from 60 to 2480 m3/h, the max vacuum pressure could reach -500mbar, and the max compress pressure could reach 600mbar, the power ranges from 0.12KW to 29KW. We only produce side channel blowers.

The advantages of our products:
1. 100% oil free, Insulation class is F, Protection class is IP55.
2. Dual frequency 50HZ and 60HZ are available
3. Made of die cast aluminum ADC12.
4. Dual usage: compressor and vacuum (suction and blow).
5. Virtually maintenance free, with sealed long life bearings.
6. Smart design and low noise
7. ATEX explosion proof motor is available for all the blowers. We are the only manufacturer of blower which has the authorization to produce ATEX explosion proof motor.
8. IE2 and IE3 motor are available for some blowers.
9. Good quality and competitive prices.
10. Quick delivery date.

Application of our blowers/pumps:

1. Aquaculture (fish and prawn pong aeration)
2. Waste water treatment, sewage treatment system.
3. Pneumatic conveying systems.
4. Lifting and holding of parts by vacuum.
5. Packing machines.
6. Filling of bags/bottles/hoppers.
7. Soil remediation
8. Food processing.
9. Laser printers
10. Dental suction equipment.
11. Paper processing.
12. Gas analysis.

Model	Stage	Frequency	Power	Voltage		Current	Airflow	Vaccum	Compress	Noise	Weight
		Hz	KW	V		A	m3/h	mbar	mbar	dB(A)	Kg
510H36	Single	50	2.20	200-240Δ	345-415Y	9.7Δ/5.6Y	210	-220	270	64	27
510H36	Single	60	2.55	220-275Δ	380-480Y	10.3Δ/6.0Y	255	-260	290	70	27

Material:	Aluminum
Usage:	for Manufacture
Flow Direction:	Centrifugal
Pressure:	High Pressure
Certification:	CE, CCC
Phase:	Single

Samples:	US$ 190/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

Can air compressors be used for gas compression and storage?

Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

Gas Compression:

Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

Gas Storage:

Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

Gas Types:

While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

Nitrogen
Oxygen
Hydrogen
Carbon dioxide
Natural gas
Refrigerant gases

It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

air compressor

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

Check the power source and ensure the compressor is properly plugged in.
Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

Ensure the compressor’s cooling system is clean and unobstructed.
Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
Verify that the compressor is not being operated in an excessively hot environment.
Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

air compressor

What maintenance is required for air compressors?

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

China Hot selling Small Size Silent Air Compressor air compressor for sale
editor by CX 2023-11-18

China Hot selling Portable Silent Air Compressor for Hydrogen Fuel Cell Pressurized Oil-Free Air Compressor mini air compressor

Product Description

Pressurized oil-free centrifugal air compressor

The fuel cell air compressor is mainly used in the fuel cell air circuit to compress the external gas to obtain a suitable inlet pressure and flow rate for the operation of the stack.Oil free air compressors have the following advantages:
1. The oil-free air compressor adopts small cylinders, with a smaller volume and more compact structure;
2. The oil-free air compressor has excellent balance performance and does not require too many parts;
3. Low vibration, but high operating efficiency;
4. The oil-free silent design is used in the design of oil-free air compressors, which will not produce excessive noise during long-term operation;
5. Unmanned duty can be achieved during the work process;
6. The design of oil-free air compressors intentionally avoids excessive components, so they do not require a lot of manpower and material resources for maintenance and upkeep.

Product Parameters

Pressurized oil-free centrifugal air compressor

model	XT-FCC160	XT-FCC300	XT-FCC300S	XT-FCC300P
Rated pressure Ratio(PR)	2.5	2.5	2.5	2.8
Flow (g/s)	58	108	108	97
Air compressor rated power( KW)	9	<15	<15	15.94
Matching system power (KW)	30-50	50-100	50-100	50-100
Intake air temperature ºC	-30-45ºC	-30-45ºC	-30-45ºC	-30-45ºC
voltage ( VDC)	450-750	450-750	450-750	450-750
Start/stop Life (times)	>100000	>100000	>100000	>100000

Company Profile

HangZhou Sinopower Technologies Co., Ltd. develops and distributes various products in the hydrogen energy industry chain, including but not limited to hydrogen production, hydrogen storage, hydrogen supply, stacks and BOP parts, fuel cell system assemblies, fuel cell vehicles, etc. We have an experienced professional technical research and development team, which can provide professional services from product selection and matching, system design, product customization development and technical support. We provide hydrogen fuel cell design and R&D services and finished hydrogen fuel cell products for mainstream forklift companies in China. We have experience in stack integration and packaging services and are well received by customers at home and abroad.

Packaging & Shipping

The packaging of the items is strong and intact, avoiding breakage, leakage, and loss during the shipping process; avoiding damage to the internal items caused by external climate changes.Customize packaging according to the actual product to ensure that the product arrives at the customer’s designated place without damage.

Our Advantages

After-sales Service:	Available
Warranty:	1year
Installation Type:	Stationary Type
Lubrication Style:	Oil-free
Cylinder Position:	Vertical
Rated Pressure Ratio:	2.5-2.8

Samples:	US$ 1469/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

1. Compact and Lightweight:

2. High Efficiency:

3. Quiet Operation:

4. Oil Lubrication:

5. Versatile Applications:

6. Easy Maintenance:

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

As altitude increases, the air density decreases. This means there is less oxygen available per unit volume of air. Since air compressors rely on the intake of atmospheric air for compression, the reduced air density at higher altitudes can lead to a decrease in compressor performance.

2. Reduced Airflow:

The decrease in air density at higher altitudes results in reduced airflow. This can affect the cooling capacity of the compressor, as lower airflow hampers the dissipation of heat generated during compression. Inadequate cooling can lead to increased operating temperatures and potential overheating of the compressor.

3. Decreased Power Output:

Lower air density at higher altitudes also affects the power output of the compressor. The reduced oxygen content in the air can result in incomplete combustion, leading to decreased power generation. As a result, the compressor may deliver lower airflow and pressure than its rated capacity.

4. Extended Compression Cycle:

At higher altitudes, the air compressor needs to work harder to compress the thinner air. This can lead to an extended compression cycle, as the compressor may require more time to reach the desired pressure levels. The longer compression cycle can affect the overall efficiency and productivity of the compressor.

5. Pressure Adjustments:

When operating an air compressor at higher altitudes, it may be necessary to adjust the pressure settings. As the ambient air pressure decreases with altitude, the compressor’s pressure gauge may need to be recalibrated to maintain the desired pressure output. Failing to make these adjustments can result in underinflated tires, improper tool performance, or other issues.

6. Compressor Design:

Some air compressors are specifically designed to handle higher altitudes. These models may incorporate features such as larger intake filters, more robust cooling systems, and adjusted compression ratios to compensate for the reduced air density and maintain optimal performance.

7. Maintenance Considerations:

Operating an air compressor at higher altitudes may require additional maintenance and monitoring. It is important to regularly check and clean the intake filters to ensure proper airflow. Monitoring the compressor’s operating temperature and making any necessary adjustments or repairs is also crucial to prevent overheating and maintain efficient performance.

When using an air compressor at higher altitudes, it is advisable to consult the manufacturer’s guidelines and recommendations specific to altitude operations. Following these guidelines and considering the impact of altitude on air compressor performance will help ensure safe and efficient operation.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

China Hot selling Portable Silent Air Compressor for Hydrogen Fuel Cell Pressurized Oil-Free Air Compressor mini air compressor
editor by CX 2023-11-14

China Hot selling Low Pressure Screw Air Compressor Permanent Magnet Screw Air Compressor Energy Saving with Hot selling

Product Description

Product Technical Description

Model :	Low Pressure Permanent Magnet Series (LB & LBPM)
Type:	Low Pressure Permanent Magnet Screw Air Compressor
Voltage:	380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements
Working Pressure:	1.5~5bar
Installed Motor Power:	37~185 Kw
Color:	Blue
Driven Method:	Direct Driven
Trademark:	SCR
Transport Package:	Standard Wooden Packing
Available Certificate:	CE, ISO, UL, ASME, GHOST
Origin:	ZheJiang , China
Application:	Beverage , Biological Fermentation , Cement Transportation , Printing & Dyeing , Sewage Treatment , Textile

Product Features

1.Specially designed PM motor.

2.Enhanced energy savings.

3.Low Energy Consumption,Low running,maintenance cost.

4.Aptitude and intelligent Control, integrated touch-screen PLC displayer.

5.Unique safe units make whole compressor more safety, more stable,lest noise,lest energy Loss.

6.Easy to install,operate,maintain.

Specially designed PM motor:

The PM motor efficiency is even higher than IE3 premium efficiency motors. The motor uses high performance magnetic materials giving many advantages such as bearing free operation, grease free maintenance, direct 1:1 coupling without transmission losses, low noise and low vibration leading to a compact structure.

Enhanced Energy Savings:

When demand is low the PM low pressure compressor firstly reduces the speed to maintain the correct flow demand. If the air demand stops the compressor enters standby mode, saving further energy. The compressor automatically restarts and runs when the pressure drops below its setpoint.

The latest generation intelligent touchscreen controller:

SCR’s latest touchscreen interface allows simple intelligent control for your compressor. Pressure and scheduling times can be easily programmed allowing you to automatically start and stop the compressor to match production times. Remote operation and real time monitoring are built in the controller as standard.

Specially designed oil pipe system:

The oil system has been specially designed to reduce maintenance downtime and extend the periods between maintenance visits.

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Structure Type:	Closed Type
Installation Type:	Stationary Type
Type:	Twin-Screw Compressor

Customization:	Available \|

air compressor

How does variable speed drive technology improve air compressor efficiency?

1. Matching Air Demand:

2. Reduced Unloaded Running Time:

3. Soft Starting:

4. Energy Savings at Partial Load:

5. Elimination of On/Off Cycling:

6. Enhanced System Control:

air compressor

What safety precautions should be taken when working with compressed air?

Working with compressed air requires adherence to certain safety precautions to prevent accidents and ensure the well-being of individuals involved. Here are some important safety measures to consider:

1. Personal Protective Equipment (PPE):

Wear appropriate PPE, including safety goggles or a face shield to protect eyes from flying debris or particles, hearing protection to reduce noise exposure, and gloves to safeguard hands from potential hazards.

2. Compressed Air Storage:

Avoid storing compressed air in containers that are not designed for this purpose, such as soda bottles or makeshift containers. Use approved and properly labeled air storage tanks or cylinders that can handle the pressure and are regularly inspected and maintained.

3. Pressure Regulation:

Ensure that the air pressure is regulated to a safe level suitable for the equipment and tools being used. High-pressure air streams can cause serious injuries, so it is important to follow the manufacturer’s recommendations and never exceed the maximum allowable pressure.

4. Air Hose Inspection:

Regularly inspect air hoses for signs of damage, such as cuts, abrasions, or leaks. Replace damaged hoses immediately to prevent potential accidents or loss of pressure.

5. Air Blowguns:

Exercise caution when using air blowguns. Never direct compressed air towards yourself or others, as it can cause eye injuries, hearing damage, or dislodge particles that may be harmful if inhaled. Always point blowguns away from people or any sensitive equipment or materials.

6. Air Tool Safety:

Follow proper operating procedures for pneumatic tools. Ensure that tools are in good working condition, and inspect them before each use. Use the appropriate accessories, such as safety guards or shields, to prevent accidental contact with moving parts.

7. Air Compressor Maintenance:

Maintain air compressors according to the manufacturer’s guidelines. Regularly check for leaks, clean or replace filters, and drain moisture from the system. Proper maintenance ensures the safe and efficient operation of the compressor.

8. Training and Education:

Provide adequate training and education to individuals working with compressed air. Ensure they understand the potential hazards, safe operating procedures, and emergency protocols. Encourage open communication regarding safety concerns and implement a culture of safety in the workplace.

9. Lockout/Tagout:

When performing maintenance or repairs on compressed air systems, follow lockout/tagout procedures to isolate the equipment from energy sources and prevent accidental startup. This ensures the safety of the individuals working on the system.

10. Proper Ventilation:

Ensure proper ventilation in enclosed areas where compressed air is used. Compressed air can displace oxygen, leading to a potential risk of asphyxiation. Adequate ventilation helps maintain a safe breathing environment.

By adhering to these safety precautions, individuals can minimize the risks associated with working with compressed air and create a safer work environment.

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

Oil-Free Air Compressors:

1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

China Hot selling Low Pressure Screw Air Compressor Permanent Magnet Screw Air Compressor Energy Saving with Hot selling
editor by CX 2023-11-13

China wholesaler 30kw 37kw 55kw 75kw 90kw Industrial Electric Pm VSD CHINAMFG 40HP 50HP 75HP 100HP 125HP Screw Air Compressor Compresor De Aire with Hot selling

Product Description

30kw 37kw 55kw 75kw 90kw Industrial Electric Pm VSD CHINAMFG 40hp 50HP 75hp 100hp 125hp Screw Air Compressor Compresor De Aire
Promises Every Machine Will Run Well More Than 15 Years

Saving energy is making money !!!
Hengchaowin rotary screw air compressor used germany technology screw(air end ) ,
The same intake valve designed by CHINAMFG Rand,
high Efficient IP54 rated motor,And quoted the high-efficiency inverter fromDenmark.
The air compressor can maintain a stable motor efficiency at any speed,
so it is more energy-saving and power-saving.

Product Description

Screw group	5: 6 Gear rotor
Compression method	Continuous, single stage
Compressed air outlet pressure	0.65-1.0MPa
Compressed air outlet temperature	Air-cooled
Compressed air outlet temperature	10ºC~15ºC higher than the ambient temperature
Volume of Lubricating Oil	About 16.5liters
Motor speed	N=-1200-3600r/min
Rated power	90 kw
Air capacity	V=16.0-12.8 m3/min
Weight	1400 kg
Fuel consumption	Exhaust oil content is less than 3PPM
Noise level	78dB(A)

Detailed Photos

Advantage:
1.It adopts the design of large rotor and low speed, and contains 2 independent rotors, which has high efficiency and low noise,The design service life is 30 years.
2. The high-frequency flexible inverter can effectively reduce the magnetic field interference generated by the inverter, and the special heat dissipation design can prevent high temperature shutdown in summer.
3.Colorful touch system, intelligent operation, remote monitoring integrated system, convenient and worry-free.
4.Our machines have reliable quality and warranty is 2 years of the whole machine,5 years of the screw.
5. We have our professinal after sales technician team to instruct you installation and maintenance.

Hot products
1. direct drive rotary screw air compressor
2. energy saving vsd screw air compressor
3. air compressor with air tank and air dryer.

Product Parameters

Power : 7.5kw -513kw
working pressure : 7bar 8bar 10bar 13bar 16bar
voltage : 220v/380v/415v/480v
color : gery/blue/white

HWV-55A				HWV-75A				HWV-90A				HWV-110A				HWV-132A				HWV-160A				HWV-185A
10	9.6	8	7.6	13	12.6	11	10.5	16	15	13	12.5	21	19.8	17	16.4	24.5	23.2	20	19.4	28.7	27.6	23.5	22.8	32	30.4	27.4	26.8
353.1	338.976	282.48	268.356	459.03	444.906	388.41	370.755	564.96	529.65	459.03	441.375	741.51	699.138	600.27	579.084	865.095	819.192	706.2	685.014	1013.397	974.556	829.785	805.068	1129.92	1073.424	967.494	946.308
7	8	10	12.5	7	8	10	12.5	7	8	10	12.5	7	8	10	12.5	7	8	10	12.5	7	8	10	12.5	7	8	10	12.5
102	116	145	174	102	116	145	174	102	116	145	174	102	116	145	174	102	116	145	174	102	116	145	174	102	116	145	174
55kw/ 75hp				75kw/ 100hp				90kw/ 120hp				110kw/ 150hp				132kw/ 175hp				160kw/ 210hp				185kw/ 250hp
78±2				78±2				83±2				85±2				85±2				85±2				88±2
RP2				RP2				RP2				RP2, 1/2				RP2, 1/2				RP2, 1/2				RP2, 1/2
AC 380v/415v/220v/480v or 50hz/60hz accpet Customized voltage
Variable frequency soft star
55				65				72				90				90				110				110
1800				1800				2000				2300				2500				2500				3150
1250				1250				1250				1470				1470				1470				1980
1670				1670				1670				1840				1840				1840				2150
1480				1680				1860				2600				2900				3200				3500

Why Choose Us
HangZhou CHINAMFG Technology Co., Ltd., founded in 1985, in ZheJiang ,China, It is a professional air compressor manufacturer with 30 years of experience in R&D, manufacturing, marketing and service.

After the technical system reform in 2000, the company introduced German advanced CHINAMFG technology, adhering to the German advanced industrial design concept, rigorous manufacturing technology and comprehensive management. We strictly implement ISO9001 international quality system certification and EU CE standard production machines. The performance and quality of our products have been widely recognized and praised by the market, occupying 30% of China’s market share.
Starting to enter overseas markets in 2571, it currently has agents and after-sales teams in North America, Western Europe, South Africa, East Africa and other regions.

Company Profile

Brief introduction of factory:

1. We have been engaged in R D department, production and sales of air compressors for 30 years;
2. Our air compressor products through CE,SGS,ISO certification, with more than 20 invention patents;
3. Our products are exported to 132 countries and regions around the world;
4. Our air compressor provides a 5-year warranty.
If you have specific parameters and requirements for our Rotary Screw Type Air Compressor, customization is available

Customer feedback

Providing high-quality machines is our standard, and satisfying every customer is our pursuit. Over the years, we have won unanimous praise from overseas users for our integrity and high-quality product quality.

Packaging
The air compressor is guaranteed for 1 year and 5 years for the screw(air end) . Warranty time is calculated from machine leave the factory.

After Sales Service

1. 24/7 after sales service in different languages.
2. Online instruction for installation and commissioning.
3. On-site instruction for installation and commissioning provided by well-trained engineers or local authorized service center.
4. CHINAMFG agents and after sales service available.

FAQ

Q1: What is your product name?
A:Industrial Energy Saving VSD Oil Lubricating Rotary Screw Air Compressor Machine 22kw 30hp

Q2: Why should I choose you?
1. 24/7 after sales service support in different languages;
2. Guidance of installation and commissioning on site can be provided by factory-trained technicians or local Authorized Service Center;
3. Technical training for customers in HENGCHAOWINO air compressor factory or working site;
4. Plenty of original spare parts with proven quality are all available from our central stocks in ZheJiang Province and all distributors’depots;
5. All kinds of technical documents in different languages.

Q3: Can you use our brand?
A: Yes, OEM is available.

After-sales Service:	Support Online and Local Service
Warranty:	18m
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Structure Type:	Closed Type

Customization:	Available \|

air compressor

What is the impact of humidity on compressed air quality?

Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

1. Corrosion:

High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

2. Contaminant Carryover:

Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

3. Decreased Efficiency of Pneumatic Systems:

Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

4. Product Contamination:

In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

5. Increased Maintenance Requirements:

Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

6. Adverse Effects on Instrumentation:

Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

2. Reduced Airflow:

3. Decreased Power Output:

4. Extended Compression Cycle:

5. Pressure Adjustments:

6. Compressor Design:

7. Maintenance Considerations:

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China wholesaler 30kw 37kw 55kw 75kw 90kw Industrial Electric Pm VSD CHINAMFG 40HP 50HP 75HP 100HP 125HP Screw Air Compressor Compresor De Aire with Hot selling
editor by CX 2023-11-11

China Good quality Big Discount 3.4kw 120L Portable silent Piston Oil Free Air Compressor Hb120 for Sale with Hot selling

Product Description

Features
1. The machine is light, easy to carry.
2. Without refueling in use process, low energy consumption, simple maintenance and low cost.
3. The machine little vibration, low noise
4. Compared with similar machines, the air charging time is faster and the work is reliable.
5. Suitable for food, medical treatment, woodworking decoration, scientific research institutions, and compressed gas as a power source in the field.

Product Parameters

Model	HB12	HB30	HB35	HB50	HB70A	HB90A	HB120	HB200
Input power (KW)	0.68	0.75	0.85	1.5	1.36 (0.68*2)	2.04 (0.68*3)	3.4 (0.85*4)	5.1 (0.85*6)
Voltage (V/Hz)	220/50	220/50	220/50	220/50	220/50	220/50	220/50	220/50
Current (A)	2.8	3.0	3.8	6	6.8	9.0	13	20
Rotate speed (rpm/min)	1400	1400	1400	1400	1400	1400	1400	1400
Air Intake (L/min)	116	128	150	180	256	580	720	950
Exhaust pressure(Mpa)	0.8	0.8	0.8	0.8	0.7	0.7	0.7	0.7
Noise (db(A))	66	66	68	71	71	73	85	85
Volume (L)	12	30	35	50	70	90	160	200
Weight (KG)	18	23	26	39	43	69	105	150
Dimensions (CM)	532355	543056	643261	703065	703570	1003570	1204175	1504585

Detailed Photos

Packaging & Shipping

Company Profile

Founded in 1997, our factory has become 1 of the most powerful air compressor equipment and engineering drilling equipment manufacturers in China, and is a member of the national compressor industry association, drilling machinery and pneumatic tools industry association, and a drafting unit of national standards. All the products have passed the quality system certification of ISO9001:2000 and national inspection-free products.

Its total registered capital of 245 million yuan, holding 10 subsidiaries, is a set of technology research and development, production and manufacturing, sales and service functions in 1 of the modern machinery and equipment manufacturing enterprises, the enterprise covers an area of 31000m2. The group has more than 1100 employees, including more than 100 middle and senior technical personnel. The group has established close cooperative relations with many domestic famous universities and other scientific research institutes, with strong product research and development capabilities.

Now as the main exporter of drilling rigs and air compressors equipment in China. It has exported to more 60 countries such as Southeast Asia, South America, Africa, Eastern Europe, Russia etc. Excellent quality and perfect service gain the consistent praise from customers.

Certifications

After Sales Service

1.Pre-sale service:

Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments .

1.Select equipment model.

2.Design and manufacture products according to client’s special requirement

3.Train technical personnel for clients .

2.Services during the sale:

1.Pre-check and accept products ahead of delivery .

2. Help clients to draft solving plans .

3.After-sale services:

Provide considerate services to minimize clients’ worries.

1.Complete Aftersales service,professional engineers available to service machinery at home or oversea.

2. 24 hours technical support by e-mail.

3. Call or Video service.

FAQ

Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.

Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.

Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.

Q4: What about the voltage of products??Can they be customized?
A4: Yes, of course. The voltage can be customized according to your equirement.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 7-15 days. Other electricity or other color we will delivery within 20-30 days.

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

Q7 Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

After-sales Service:	24 Hours Online Service
Warranty:	1 Year
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Structure Type:	Open Type
Product Name:	Oil Free Air Compressor

air compressor

How Do Water-Lubricated Air Compressors Contribute to Energy Savings?

Water-lubricated air compressors can contribute to energy savings in several ways, making them an attractive option for industries looking to optimize their energy consumption. Here are the key ways in which water-lubricated compressors help achieve energy efficiency:

Reduced friction and improved efficiency: Water serves as a lubricant in water-lubricated compressors, creating a thin film between moving parts to reduce friction. This reduces the energy losses due to mechanical friction and improves the overall efficiency of the compressor. Compared to oil-lubricated compressors, water-lubricated models can achieve higher mechanical efficiency, translating into energy savings over the compressor’s operational lifetime.
Elimination of oil vapor carryover: Oil-lubricated compressors require oil filtration systems to prevent oil carryover into the compressed air stream. These filtration systems consume energy and can introduce pressure drops. In contrast, water-lubricated compressors eliminate the need for oil filtration, reducing energy consumption associated with filtration equipment and minimizing pressure losses. This leads to improved system efficiency and energy savings.
Improved heat transfer and cooling: Water-lubricated compressors offer enhanced heat transfer capabilities compared to oil-lubricated counterparts. Water has a higher specific heat capacity and thermal conductivity, allowing for more efficient heat dissipation. This results in lower operating temperatures and reduces the energy required for cooling the compressor. By optimizing heat transfer, water-lubricated compressors can minimize energy consumption associated with cooling systems or air conditioning in compressor rooms.
Optimized system design: Water-lubricated compressors often employ advanced system designs that further enhance energy efficiency. For example, they may incorporate variable speed drive (VSD) technology, which adjusts the compressor’s speed and power consumption based on the actual air demand. This eliminates energy waste associated with constant-speed operation and reduces energy consumption during periods of low compressed air demand. Additionally, water-lubricated compressors may feature optimized internal components and improved air flow dynamics, resulting in reduced energy losses and improved overall system efficiency.
Heat recovery opportunities: Water-lubricated compressors can provide opportunities for heat recovery. The heat generated during compression can be captured and utilized for various heating applications within the facility, such as space heating, water heating, or process heating. By harnessing this waste heat, water-lubricated compressors contribute to energy savings by offsetting the need for additional energy sources for heating purposes.

By combining these energy-saving features, water-lubricated air compressors help optimize energy consumption, reduce operational costs, and minimize the environmental impact associated with compressed air systems. Implementing water-lubricated compressors with a comprehensive energy management strategy can result in significant energy savings and improved overall sustainability for industrial operations.

air compressor

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

Water-lubricated air compressors find various applications in the automotive industry. Here’s a detailed explanation of how they are used in automotive applications:

Tire Inflation:

Service Stations: Water-lubricated air compressors are commonly used in automotive service stations for tire inflation. They provide a reliable source of compressed air for quickly and efficiently inflating tires to the recommended pressure. The water lubrication system in these compressors helps to reduce friction and wear on internal components, ensuring smooth operation and extended lifespan.
Tire Shops: Tire shops often utilize water-lubricated air compressors as part of their tire service equipment. These compressors can supply compressed air for tire inflation, tire mounting and demounting machines, and other pneumatic tools used in tire service and maintenance.

Painting and Finishing:

Spray Painting: Water-lubricated air compressors are also used in automotive painting and finishing processes. Compressed air is used to power spray guns that apply paint or coatings to vehicles during the painting process. The water lubrication system helps maintain the cleanliness of the compressor and prevents oil contamination, ensuring high-quality paint finishes.
Sanding and Polishing: Compressed air is often used for sanding and polishing automotive surfaces. Water-lubricated air compressors provide a reliable source of compressed air for pneumatic sanders, polishers, and other air-powered tools used in automotive surface preparation and refinishing.

Brake and Suspension Systems:

Brake Bleeding: Water-lubricated air compressors can be used during brake bleeding procedures in automotive repair and maintenance. Compressed air is used to purge air bubbles from the brake system, ensuring optimal brake performance and pedal feel. The water lubrication system helps maintain the purity of the compressed air, preventing contamination that could affect the brake system’s functionality.
Suspension Systems: Air suspension systems in vehicles often rely on compressed air for operation. Water-lubricated air compressors provide a continuous supply of clean and lubricated compressed air for inflating and maintaining the air springs or airbags used in vehicle suspensions.

Diagnostic and Testing Equipment:

Diagnostic Tools: Water-lubricated air compressors are utilized in automotive diagnostic and testing equipment. Compressed air is used to operate pneumatic diagnostic tools, such as vacuum testers, pressure gauges, and leak detectors, that help diagnose and troubleshoot various vehicle systems.
Testing and Calibration: Automotive testing and calibration equipment, such as dynamometers and emission testing devices, often require a source of compressed air. Water-lubricated air compressors supply the necessary compressed air for precise and accurate testing of vehicle performance, emissions, and other parameters.

air compressor

How Is Water Quality Crucial for the Performance of These Compressors?

Water quality plays a crucial role in the performance of water-lubricated air compressors. The quality of the water used for lubrication directly impacts the efficiency, reliability, and lifespan of these compressors. Here are the key reasons why water quality is essential for optimal compressor performance:

Lubrication effectiveness: Water serves as the lubricant in water-lubricated air compressors. The water forms a protective film between moving parts, reducing friction and wear. However, if the water contains impurities or contaminants, it can compromise the lubricating properties. Impurities like minerals, sediments, or dissolved solids can hinder the formation of an effective lubricating film, leading to increased friction and potential damage to the compressor components.
Corrosion prevention: Water with high mineral content, such as hard water, can promote corrosion within the compressor system. Minerals like calcium and magnesium can react with metal surfaces, leading to rust, scale formation, and degradation of internal components. Corrosion compromises the structural integrity of the compressor, reduces its efficiency, and may result in costly repairs or even premature failure.
Preventing blockages: Poor water quality can result in the accumulation of sediments, debris, or contaminants within the compressor system. These deposits can block water passages, filters, or valves, impeding the flow of water and affecting the overall performance of the compressor. Restricted water flow may lead to inadequate cooling, reduced lubrication, and compromised efficiency.
Preventing fouling and fouling-related issues: Fouling refers to the accumulation of organic or inorganic deposits on heat transfer surfaces, such as heat exchangers or radiators, within the compressor system. Poor water quality can contribute to fouling, reducing heat transfer efficiency and impairing the cooling capacity of the compressor. This can result in elevated operating temperatures, decreased performance, and potential damage to the compressor.
System cleanliness: Clean water is crucial for maintaining a clean and sanitary compressor system, especially in industries like food and beverage or medical applications. Contaminated water can introduce harmful bacteria, microorganisms, or particles into the compressor, posing a risk to product quality, safety, or patient well-being.

To ensure optimal performance and longevity of water-lubricated air compressors, it is important to monitor and maintain the quality of the water used for lubrication. Regular water analysis, proper filtration, and appropriate water treatment measures should be employed to remove impurities, control mineral content, and maintain the desired water quality. By ensuring clean and high-quality water, the compressor can operate efficiently, minimize the risk of component damage, and contribute to a reliable and safe compressed air system.

China Good quality Big Discount 3.4kw 120L Portable silent Piston Oil Free Air Compressor Hb120 for Sale with Hot selling
editor by CX 2023-11-09

China Hot selling Oil Free Silent Stainless Water Tank Oilless Air Compressor High Efficiency Air Compressors arb air compressor

Product Description

CHINAMFG oil-less air compressor is specially designed to support AAS, ICP-OES, ICP-MS, Termovap Sample Con centrator, etc. with pure, dry compressed air and constant pressure.

Note:
AA oil free air compressor no need manual drainage, can be constantly use;
AA*A oil free air compressor adopts electronic water removal, mainly used in high temperature, high humidity area, can ensure that the outlet is dry.

Functions and Features:
Double cylinder piston compressor, stable and reliable operation, put out pure oil without lubri cate;
Original air-cooled screw centrifugal dehydrator, cooling of compressed air rapidly, centrifugal separation of condensate;
Optional electronic dehydrator, water removal thoroughly;
Stainless steel storage sink which can prevent rust;
Vertical design, independent suspension damping mechanism, nest egg type sound-absorbing sponge, less vibration, lower noise;
Triple filters makes gas sophisticate and pure.

Specification:

model	Displacement	Press	power	Main character	Overall Dimension
model	Displacement	Press	power	Main character	W×D×H mm
ACA320	20L/min	0.05~3kg	250W	Oil-free dual-piston compressor box-type silent	400×300×635
AA320	20L/min	0.05~3kg	260W	Automatic drainage	430×335×676
AA320A	20L/min	0.05~3kg	320W	Automatic drainage, internal electronic water removal	430×335×676
AA530	30L/min	0.05~5kg	600W	Automatic drainage	500×335×706
AA530A	30L/min	0.05~5kg	660W	Automatic drainage, internal electronic water removal	500×335×706
AA530Z	50L/min	0.05~5.5kg	800W	Automatic drainage, high efficiency	500×335×706
AA650	50L/min	0.05~6kg	1250W	Automatic drainage.	560×400×830
AA780	80L/min	0.05~7kg	1550W	Automatic drainage.	560×400×830

After-sales Service:	1 Year
Warranty:	1 Year
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Balanced Opposed Arrangement
Cylinder Position:	Horizontal

Customization:	Available \|

air compressor

How Do You Ensure Proper Water Lubrication in Air Compressors?

Proper water lubrication in air compressors is essential for maintaining their performance, efficiency, and longevity. Here’s a detailed explanation of how to ensure proper water lubrication:

Use High-Quality Water: Start by using high-quality water for lubrication. Ideally, the water should be clean, free from impurities, and have the appropriate chemical composition. Impurities or contaminants in the water can lead to increased wear, corrosion, and blockages in the compressor. Water treatment or filtration systems may be necessary to ensure the desired water quality.
Monitor Water Supply: Ensure a consistent and adequate water supply to the compressor. Monitor the flow rate and pressure of the water supply to ensure it meets the requirements of the compressor’s lubrication system. Insufficient water flow can lead to inadequate lubrication, increased friction, and potential damage to the compressor components.
Implement Proper Water Cooling: Compressed air generates heat during the compression process, and effective cooling is crucial to maintain safe operating temperatures and proper water lubrication. Ensure that the cooling mechanisms, such as water jackets or external cooling systems, are properly designed and sized to provide adequate cooling capacity. Monitor and control the water temperature to prevent overheating and ensure optimal lubrication.
Optimize Water Distribution: Proper water distribution within the compressor is essential for effective lubrication. Ensure that the water is evenly distributed to all the necessary lubrication points, such as the bearings or other moving parts. Proper design and installation of water distribution systems, including pipes, fittings, and nozzles, are important to achieve uniform water distribution and prevent any dry spots or inadequate lubrication.
Regular Maintenance: Implement a regular maintenance schedule for the water lubrication system. This includes periodic inspection and cleaning of water filters, strainers, or screens to prevent clogging and maintain proper water flow. Check for any leaks or malfunctions in the water distribution system and promptly address them. Regularly monitor water quality and perform any necessary water treatment or filtration to maintain optimal lubrication conditions.
Follow Manufacturer Guidelines: Always follow the manufacturer’s guidelines and recommendations for water lubrication. Manufacturers provide specific instructions regarding water quality, flow rates, cooling requirements, and maintenance procedures for their compressors. Adhering to these guidelines ensures that the compressor operates within its intended parameters and maintains proper water lubrication.

By following these practices, you can ensure proper water lubrication in air compressors, promoting efficient operation, minimizing wear and tear, and extending the lifespan of the equipment. Regular monitoring, maintenance, and adherence to manufacturer guidelines are crucial to optimize water lubrication and overall compressor performance.

air compressor

How Does Water-Lubrication Affect the Lifespan of Air Compressor Components?

Water-lubrication can have both positive and negative effects on the lifespan of air compressor components. Here’s a detailed explanation of how water-lubrication can impact the lifespan of air compressor components:

Positive Effects:

Lubrication: Water-lubrication provides effective lubrication to the moving parts of the air compressor, reducing friction and wear. Proper lubrication helps minimize the stress on components such as pistons, cylinders, and bearings, which can contribute to extended component lifespan.
Cooling: Water-lubricated systems offer efficient cooling properties. The circulation of water through water jackets or cooling channels helps dissipate heat generated during compression. Effective cooling can prevent excessive temperature rise, reducing the risk of thermal damage and prolonging the lifespan of compressor components.
Contaminant Control: Water-lubrication can aid in controlling contaminants within the compressor system. Water acts as a medium to trap and remove particulate matter or debris generated during compressor operation. This helps protect components from potential damage and contributes to their longevity.

Negative Effects:

Corrosion: Water-lubrication introduces moisture into the compressor system, which can increase the risk of corrosion. Corrosion can degrade the integrity of components, leading to reduced lifespan and potential failures. Proper corrosion prevention measures, such as using corrosion-resistant materials or implementing water treatment processes, are essential to mitigate this negative effect.
Contamination: Although water-lubrication can help control contaminants, it can also introduce impurities and contaminants if the water supply or treatment is not adequately managed. Contaminants such as sediment, minerals, or microbial growth can negatively impact component lifespan by causing blockages, wear, or chemical degradation. Regular maintenance and proper filtration systems are crucial to minimize contamination-related issues.
System Complexity: Water-lubricated systems can be more complex than oil-lubricated systems, requiring additional components such as water pumps, filters, and separators. The complexity of the system can introduce more points of failure or maintenance requirements, which, if not addressed properly, can affect the overall lifespan of the compressor components.

Proper maintenance, monitoring, and adherence to manufacturer guidelines are essential to maximize the positive effects and mitigate the negative effects of water-lubrication on air compressor components. Regular inspection, cleaning, lubrication, and water treatment can help ensure optimal operation and prolong the lifespan of the compressor components.

air compressor

Are There Any Downsides to Using Water-Lubricated Air Compressors?

While water-lubricated air compressors offer several advantages, there are also some downsides to consider when using this type of compressor. Here are a few potential drawbacks associated with water-lubricated air compressors:

Water quality requirements: Water-lubricated compressors are highly dependent on the quality of the water used for lubrication. The water should be free from contaminants, minerals, and impurities that can affect the compressor’s performance or cause corrosion. Ensuring the consistent availability of high-quality water may require additional filtration or treatment processes, which can add complexity and cost to the system.
Increased maintenance: Compared to oil-lubricated compressors, water-lubricated models may require more frequent maintenance. Regular checks, cleaning, and monitoring of the water system are necessary to prevent blockages, maintain proper water flow, and ensure the cleanliness of the compressor. This increased maintenance requirement can result in higher operational costs and more downtime for maintenance activities.
Potential for corrosion: While water itself is not corrosive, certain water conditions, such as high mineral content or low pH levels, can promote corrosion within the compressor system. Corrosion can lead to component damage, reduced efficiency, and the need for repairs or replacements. Implementing corrosion prevention measures, such as water treatment or the use of corrosion-resistant materials, may be necessary to mitigate this risk.
Compatibility limitations: Water-lubricated compressors may have limitations when it comes to compatibility with certain materials or gases. For example, in applications where the compressed air comes into contact with sensitive materials or requires specific gas purity, the use of water as a lubricant may not be suitable. In such cases, alternative lubrication methods or compressor types may be more appropriate.
Environmental considerations: While water is generally considered environmentally friendly, the disposal of used water from the compressor system may require proper wastewater management. Depending on local regulations and requirements, additional steps may be needed to ensure compliant and environmentally responsible disposal of the water used for lubrication.

Despite these potential downsides, water-lubricated air compressors continue to be used in various industries and applications due to their specific advantages and suitability for certain environments. It is important to carefully evaluate the specific requirements, operating conditions, and maintenance considerations of a given application to determine whether a water-lubricated compressor is the most suitable choice.

China Hot selling Oil Free Silent Stainless Water Tank Oilless Air Compressor High Efficiency Air Compressors arb air compressor
editor by CX 2023-11-07

Product Description

What are the advantages of using rotary vane compressors?

How do you choose the right air compressor for woodworking?

What maintenance is required for air compressors?

Product Description

DENAIR Hannover Messe 2017DENAIR Diesel Portable Air Compressor PackingWe carefully selected for you the classic case

How does variable speed drive technology improve air compressor efficiency?

Can air compressors be integrated into automated systems?

What is the impact of tank size on air compressor performance?

Product Description

How Do Water-Lubricated Air Compressors Impact Compressed Air Quality?

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

How does a water lubrication system work in air compressors?

Product Description

What are the advantages of using rotary vane compressors?

How do you maintain proper air quality in compressed air systems?

What maintenance is required for air compressors?

Product Description

Can air compressors be used for gas compression and storage?

How do you troubleshoot common air compressor problems?

What maintenance is required for air compressors?

Product Description

What are the advantages of using rotary vane compressors?

What is the impact of altitude on air compressor performance?

What is the impact of tank size on air compressor performance?

Product Description

How does variable speed drive technology improve air compressor efficiency?

What safety precautions should be taken when working with compressed air?

How do oil-lubricated and oil-free air compressors differ?

Product Description

30kw 37kw 55kw 75kw 90kw Industrial Electric Pm VSD CHINAMFG 40hp 50HP 75hp 100hp 125hp Screw Air Compressor Compresor De AirePromises Every Machine Will Run Well More Than 15 Years

What is the impact of humidity on compressed air quality?

What is the impact of altitude on air compressor performance?

How is air pressure measured in air compressors?

Product Description

How Do Water-Lubricated Air Compressors Contribute to Energy Savings?

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

How Is Water Quality Crucial for the Performance of These Compressors?

Product Description

How Do You Ensure Proper Water Lubrication in Air Compressors?

How Does Water-Lubrication Affect the Lifespan of Air Compressor Components?

Are There Any Downsides to Using Water-Lubricated Air Compressors?

DENAIR Hannover Messe 2017

DENAIR Diesel Portable Air Compressor Packing

We carefully selected for you the classic case

30kw 37kw 55kw 75kw 90kw Industrial Electric Pm VSD CHINAMFG 40hp 50HP 75hp 100hp 125hp Screw Air Compressor Compresor De Aire
Promises Every Machine Will Run Well More Than 15 Years