Tag Archives: air compressor small

China Best Sales Stationary Cheap Low Noise  Smart Oil  Less Cooling Screw Air Compressor with Low Price small air compressor

Product Description

 

Product Details

 

 Product Features

PM VSD screw air compressor, is a type of screw air compressor that employs permanent magnet synchronous motor (PMSM) and frequency conversion speed control technology.
The main advantages of this screw air compressors are:
Energy saving and high efficiency: Compared with traditional asynchronous motors, permanent magnet inverter motors have higher energy utilization efficiency, and can maintain high power utilization and output power stability under both full load and partial load conditions.

Stable operation: the frequency converter can control a smoother start of the compressor, reduce the impact on the supporting power grid and the mechanical wear and tear of the machine itself, to extend the service life of the equipment.

Low noise: inverter operation can effectively reduce the noise level of the compressor at low load.

Intelligent: Equipped with an intelligent control system, the permanent magnet inverter motor can accurately control the compressor’s working status, distribute the load and achieve more efficient energy use.

Lower maintenance costs: when start-up, frequency conversion air compressor reduces the impact on the power grid and mechanical parts of the equipment, the service life is greatly increased of the compressor’s parts (the motor contactor, motor bearings, host bearings). Energy efficient controller makes the air compressor be in the loading state when at most working time, the relevant solenoid valves and pneumatic components have greatly reduced the number of actions, the failure rate of electrical and mechanical parts is greatly reduced.

Model List

 

Technical Parameters Of PM VSD Screw Air Compressor  -JXPMX Series

This series adopt direct drive mode and variable frequency startup, the standard power supply is 380V/50Hz, and 110V~480V voltage and 60Hz is Optional
 

Model Pressure
(MPa)
Pressure
(psi)
FAD
(m3/min)
FAD
(CFM)
Power
 (kW/hp)
Dimension 
(mm)
Noise
(dB)
Weight
(Kg)
Pipe
Diameter
JX-6APMX 0.8 116 0.68 24 4.5/ 6 800*500*750 ≤58±2 103 G3/4
JX-10APMX 0.8 116 1.1 38.8 7.5/ 10 800*600*860 ≤60±2 120 G1/2
1 145 0.9 31.8
1.3 188 0.7 24.7
JX-15APMX 0.8 116 1.7 60 11/ 15 1050*750*1040 ≤62±2 180 G3/4
1 145 1.6 56.5
1.3 188 1 35.3
JX-20APMX 0.8 116 2.4 84.7 15/ 20 1050*750*1040 ≤65±2 207 G3/4
1 145 2.2 77.7
1.3 188 1.8 63.6
JX-30APMX 0.8 116 3.5 123.6 22/ 30 1160*800*1180 ≤65±2 280 G1
1 145 3 105.9
1.3 188 2.5 88.3
JX-40APMX 0.8 116 5.2 183.6 30/ 40 1250*950*1270 ≤65±2 360 G1
1 145 4.3 151.8
1.3 188 3.2 113
JX-50APMX 0.8 116 6.1 215.4 37/ 50 1250*950*1270 ≤66±2 438 G1 1/2
1 145 5.3 187.1
1.3 188 4.6 162.4
JX-60APMX 0.8 116 7.4 261.3 45/ 60 1250*1000*1370 ≤68±2 486 G1 1/2
1 145 6.8 240.1
1.3 188 5.7 201.3
JX-75APMX 0.8 116 9.5 335.4 55/ 75 1600*1140*1530 ≤70±2 998 G2
1 145 8.2 289.5
1.3 188 6.8 240.1
JX-100APMX 0.8 116 12.2 430.8 75/ 100 1750*1240*1600 ≤70±2 1096 G2
1 145 10.9 384.9
1.3 188 9.1 321.3
JX-125APMX 0.8 116 15.3 540.2 90/ 125 2350*1450*1830 ≤82±2 1320 G2
1 145 13.4 473.2
1.3 188 11.6 409.6
JX-150APMX 0.8 116 19.8 699.1 110/ 150 2550*1680*1900 ≤82±2 2680 DN80
1 145 16.4 579.1
1.3 188 14.5 512.0
JX-175APMX 0.8 116 23 812.1 132/ 175 2550*1680*1900 ≤82±2 2900 DN80
1 145 19.5 688.5
1.3 188 16.2 572.0
JX-200APMX 0.8 116 27.2 960.4 160/ 200 3050*1900*2000 ≤84±2 4150 DN80
1 145 22.6 798.0
1.3 188 21.2 748.6
JX-250APMX 0.8 116 30 1059.3 185/ 250 3050*1900*2000 ≤84±2 4320 DN80
1 145 27.2 960.4
1.3 188 23.3 822.7
JX-270APMX 0.8 116 33 1165.2 200/ 270 3620*2200*2250 ≤86±2 5350 DN100
1 145 29 1571.0
1.3 188 25.4 896.9
JX-300APMX 0.8 116 38 1341.8 220/ 300 3620*2200*2250 ≤86±2 5600 DN100
1 145 32 1129.9
1.3 188 28.6 1009.9
JX-340APMX 0.8 116 43 1518.3 250/ 340 3620*2200*2250 ≤86±2 5960 DN100
1 145 37.5 1324.1
1.3 188 31.2 1101.7

Presentation of all aspects

 

In our product showcase, the air compressor stands as a testament to our commitment to precision work for better quality. Every component, from the robust motor to the intricate valves, is crafted with meticulous attention to detail in our specialized workshops.
Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our factory integrates advanced machinery to craft top-quality air compressors. Laser cutting and bending machines create precise metal components, while welding builds a durable structure. Test equipment ensures performance and safety, spray booths protect and enhance aesthetics, and efficient forklift handling streamlines production, delivering reliable products to our customers.

Customer testimonials overwhelmingly reflect high satisfaction with our air compressor products and service. Clients are consistently impressed by the durability and performance of our air compressors, noting their superior quality and suitability for various industrial needs. Ease of installation, impressive power output, and the smooth operation of our machines are frequently highlighted as key attributes.

Air compressors play a key role in many scenarios. In laboratory gas supply, they ensure precise and stable air pressure; in automotive spraying and metal stamping, they provide efficient power to improve production efficiency. In wood processing and rock drilling, air compressors drive tools to realize precise operation; in plastic production lines, stable airflow helps molding to ensure product quality. These application scenarios fully demonstrate the indispensability of air compressors in modern industrial production.

At exhibitions and customer visits, we carefully demonstrate the outstanding performance and innovative technology of our air compressors, allowing visitors to experience the advantages of their use in a wide range of industrial applications. From laboratory gas supply to automotive spraying, from metal stamping to wood processing to plastics production, the power and flexibility of air compressors were demonstrated in all aspects. Through on-site demonstrations and interactive exchanges, we not only enhanced our customers’ understanding of the product performance, but also collected valuable feedback

  /* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

What Is the Role of Water Separators in Water-Lubricated Compressors?

In water-lubricated compressors, water separators play a crucial role in maintaining the integrity and performance of the compressed air system. Here’s a detailed explanation of their role:

Water separators, also known as moisture separators or condensate separators, are components within the compressed air system that are specifically designed to remove water or moisture from the compressed air stream. They help ensure that the compressed air remains dry and free from excessive moisture, which can cause various issues in the system and downstream equipment.

The primary role of water separators in water-lubricated compressors is to separate and remove water that is present in the compressed air due to the compression process and condensation. Here’s how they accomplish this:

  1. Condensate Separation: During the compression of air, moisture present in the air is compressed along with the air molecules. As the compressed air cools down after the compression stage, the moisture condenses into liquid form. Water separators are designed to efficiently separate this condensate from the compressed air stream, preventing it from entering downstream equipment, pipelines, or end-use applications.
  2. Gravity and Centrifugal Separation: Water separators utilize various separation principles to separate the condensate from the compressed air. Gravity-based separators rely on the difference in density between the water droplets and the compressed air to allow the water to settle at the bottom of the separator, where it can be drained out. Centrifugal separators use centrifugal force to spin the air and water mixture, causing the water droplets to be thrown outwards and collected in a separate chamber.
  3. Coalescing and Filtration: Water separators often incorporate coalescing and filtration mechanisms to enhance their efficiency. Coalescing filters are used to capture and merge small water droplets into larger droplets, making it easier for the separator to separate them from the compressed air. Filtration elements, such as fine mesh or media, may be incorporated to remove any remaining water droplets or particulate matter that could potentially pass through the separator.
  4. Automatic Drainage: To ensure continuous and efficient operation, water separators are equipped with automatic drain valves. These valves periodically or on demand, expel the collected condensate from the separator. Automatic drainage prevents the accumulation of water in the separator, which can lead to reduced separation efficiency, increased pressure drop, and potential damage to downstream equipment.

By effectively removing water and moisture from the compressed air stream, water separators help prevent issues such as corrosion, clogging, freezing, and degradation of pneumatic equipment and processes. They contribute to maintaining the quality and reliability of the compressed air system while protecting downstream components and applications from the negative effects of moisture.

It is important to note that proper sizing, installation, and maintenance of water separators are essential to ensure their optimal performance. Regular inspection and maintenance of the separators, including draining the collected condensate, replacing filtration elements, and checking for any leaks or malfunctions, are necessary to ensure the efficient operation of water-lubricated compressors and the overall compressed air system.

air compressor

How Does Water-Lubrication Affect the Lifespan of Air Compressor Components?

Water-lubrication can have both positive and negative effects on the lifespan of air compressor components. Here’s a detailed explanation of how water-lubrication can impact the lifespan of air compressor components:

Positive Effects:

  • Lubrication: Water-lubrication provides effective lubrication to the moving parts of the air compressor, reducing friction and wear. Proper lubrication helps minimize the stress on components such as pistons, cylinders, and bearings, which can contribute to extended component lifespan.
  • Cooling: Water-lubricated systems offer efficient cooling properties. The circulation of water through water jackets or cooling channels helps dissipate heat generated during compression. Effective cooling can prevent excessive temperature rise, reducing the risk of thermal damage and prolonging the lifespan of compressor components.
  • Contaminant Control: Water-lubrication can aid in controlling contaminants within the compressor system. Water acts as a medium to trap and remove particulate matter or debris generated during compressor operation. This helps protect components from potential damage and contributes to their longevity.

Negative Effects:

  • Corrosion: Water-lubrication introduces moisture into the compressor system, which can increase the risk of corrosion. Corrosion can degrade the integrity of components, leading to reduced lifespan and potential failures. Proper corrosion prevention measures, such as using corrosion-resistant materials or implementing water treatment processes, are essential to mitigate this negative effect.
  • Contamination: Although water-lubrication can help control contaminants, it can also introduce impurities and contaminants if the water supply or treatment is not adequately managed. Contaminants such as sediment, minerals, or microbial growth can negatively impact component lifespan by causing blockages, wear, or chemical degradation. Regular maintenance and proper filtration systems are crucial to minimize contamination-related issues.
  • System Complexity: Water-lubricated systems can be more complex than oil-lubricated systems, requiring additional components such as water pumps, filters, and separators. The complexity of the system can introduce more points of failure or maintenance requirements, which, if not addressed properly, can affect the overall lifespan of the compressor components.

Proper maintenance, monitoring, and adherence to manufacturer guidelines are essential to maximize the positive effects and mitigate the negative effects of water-lubrication on air compressor components. Regular inspection, cleaning, lubrication, and water treatment can help ensure optimal operation and prolong the lifespan of the compressor components.

air compressor

What is a water lubrication air compressor?

A water lubrication air compressor, also known as a water-injected air compressor, is a type of compressor that utilizes water as a lubricant and cooling medium in its operation. Unlike traditional air compressors that rely on oil for lubrication, water lubrication air compressors offer specific advantages and are commonly used in certain applications. Here’s an overview of how water lubrication air compressors work and their key characteristics:

Working Principle:

In a water lubrication air compressor, the compression process involves injecting a controlled amount of water into the compression chamber. The water acts as a lubricant and cooling agent, ensuring smooth operation and preventing excessive heat buildup. As the air is compressed, the water lubricates the internal components, reducing friction and wear.

Advantages:

1. Reduced Environmental Impact: One of the significant advantages of water lubrication air compressors is their reduced environmental impact. These compressors eliminate the need for oil lubrication, resulting in lower oil consumption and the elimination of oil-related contamination risks. This makes them a more environmentally friendly option, particularly in applications where oil contamination must be avoided, such as in food processing or pharmaceutical industries.

2. Enhanced Air Quality: Water lubrication air compressors produce cleaner compressed air compared to oil-lubricated compressors. The absence of oil in the compression process eliminates the risk of oil carryover into the air system. This is essential in applications where clean and oil-free compressed air is required, such as in electronics manufacturing or spray painting.

3. Improved Energy Efficiency: Water lubrication air compressors can offer improved energy efficiency compared to oil-lubricated compressors. The water injected during the compression process helps in cooling the air, reducing the energy required for subsequent cooling and drying processes. This can lead to energy savings and lower operating costs.

4. Lower Maintenance Requirements: Water lubrication air compressors generally have lower maintenance requirements compared to oil-lubricated compressors. The absence of oil means no oil changes or oil filter replacements, simplifying maintenance tasks and reducing costs. However, regular checks and maintenance of the water filtration system are necessary to ensure the water quality and prevent any potential contamination issues.

Applications:

Water lubrication air compressors are commonly used in applications where clean and oil-free compressed air is critical. Some typical applications include:

  • Food and beverage processing
  • Pharmaceutical manufacturing
  • Electronics manufacturing
  • Spray painting and coating
  • Laboratories and research facilities
  • Dental offices

These compressors provide a reliable and environmentally friendly solution for industries and applications that require high-quality compressed air without oil contamination.

<img src="https://img.hzpt.com/img/air-compressor/air-compressor-L1.webp" alt="China Best Sales Stationary Cheap Low Noise  Smart Oil  Less Cooling Screw Air Compressor with Low Price small air compressor “><img src="https://img.hzpt.com/img/air-compressor/air-compressor-L2.webp" alt="China Best Sales Stationary Cheap Low Noise  Smart Oil  Less Cooling Screw Air Compressor with Low Price small air compressor “>
editor by lmc 2024-10-21

China manufacturer Top Brand Oil Free Rotary Screw Air Compressors 75 kw small air compressor

Product Description

Industrial Silent/Mute Medical Dry Oil Free Oilless Direct Drive Rotary Double Screw Type Air Compressor Advantages

1.Clean air 1, China
Our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Cooling System: Air Cooling and Water Cooling
Power Source: AC Power
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can Water-Lubricated Compressors Be Used in High-Pressure Applications?

Water-lubricated compressors can be used in high-pressure applications, but there are certain considerations and limitations to keep in mind. Here’s a detailed explanation:

Water-lubricated compressors are typically designed for lower to medium-pressure ranges. They are commonly used in applications where the required discharge pressure does not exceed a certain threshold, typically up to a few hundred pounds per square inch (psi). However, there are specialized water-lubricated compressors available that can handle higher pressures, depending on the specific design and construction.

The ability of a water-lubricated compressor to operate at high pressures depends on several factors:

  1. Compressor Design: The design and construction of the compressor play a crucial role in determining its maximum pressure rating. Compressors designed for high-pressure applications need to have robust components, such as reinforced casings, high-strength materials, and proper sealing mechanisms to withstand the elevated pressures. Special attention should be given to the design of the water-lubricated bearing system to ensure it can handle the increased loads and pressures.
  2. Water Supply and Cooling: High-pressure compressors generate more heat during the compression process, requiring efficient cooling mechanisms to maintain safe operating temperatures. Sufficient water supply and cooling capacity must be available to handle the increased heat load. Adequate flow rates, temperature control, and cooling methods, such as water jackets or external cooling systems, may be necessary to prevent overheating and ensure proper lubrication and cooling of the compressor components.
  3. Water Quality: The quality of the water used for lubrication becomes even more critical in high-pressure applications. Any impurities, contaminants, or minerals present in the water can cause increased wear, corrosion, or blockages, jeopardizing the compressor’s performance and reliability. Water treatment or filtration systems may be required to maintain the desired water quality and prevent damage to the compressor.
  4. Sealing and Leakage Control: As the pressure increases, it becomes more challenging to maintain effective sealing and prevent leakage in the compressor system. Proper sealing mechanisms, such as high-quality seals and gaskets, are essential to ensure minimal leakage and maintain the required pressure levels. Adequate monitoring and maintenance of the sealing components are necessary to prevent energy losses and ensure the compressor’s efficiency.

It’s worth noting that for extremely high-pressure applications, water-lubricated compressors may not be the most suitable choice. In such cases, alternative lubrication methods, such as oil or specialized lubricants, are often preferred to handle the extreme pressures and provide adequate lubrication and cooling.

When considering the use of water-lubricated compressors in high-pressure applications, it is crucial to consult with the compressor manufacturer or a qualified engineer to ensure that the chosen compressor model is specifically designed and rated for the desired pressure range. Proper installation, maintenance, and adherence to the manufacturer’s guidelines are essential to ensure the safe and efficient operation of the compressor in high-pressure conditions.

air compressor

Are There Any Restrictions on the Type of Water Used in Water-Lubricated Compressors?

When it comes to water-lubricated compressors, there are certain restrictions and considerations regarding the type of water that can be used. Here’s a detailed explanation of the restrictions on the type of water used in water-lubricated compressors:

Water Quality:

  • Cleanliness: The water used in water-lubricated compressors should be clean and free from excessive impurities or contaminants. Impurities like sediment, minerals, or debris can cause blockages, wear, or damage to the compressor components. It is important to use water that meets the cleanliness requirements specified by the manufacturer.
  • Chemical Composition: The chemical composition of the water can also be a factor to consider. Water with high mineral content or hardness can lead to scale formation, which can affect the performance and lifespan of the compressor. Water treatment methods, such as water softening or filtration, may be necessary to maintain the desired water quality.

Water Temperature:

  • Freezing Point: In cold climates, it is important to ensure that the water used in the compressor’s lubrication system does not freeze. Freezing can cause operational issues and damage to the equipment. The water temperature should be maintained above freezing point through insulation, heating, or other suitable methods.
  • Temperature Range: Water-lubricated compressors may have specific temperature requirements to ensure optimal operation and lubrication. Operating the compressor with water temperatures outside the recommended range can affect its performance and lifespan. It is important to adhere to the manufacturer’s guidelines regarding the acceptable temperature range for the water used.

Water Treatment:

  • Water Treatment Systems: Depending on the quality of the available water supply, it may be necessary to use water treatment systems to ensure the water meets the required standards. Water treatment systems can help remove impurities, control chemical composition, and maintain the desired water quality for effective lubrication and cooling.
  • Water Treatment Frequency: Regular maintenance and monitoring of the water treatment systems are essential to ensure their effectiveness. The frequency of water treatment, such as filtration or chemical treatment, may vary depending on the specific conditions and the water quality in the area.

Manufacturer Recommendations:

  • Consulting the Manufacturer: It is important to consult the manufacturer’s guidelines and recommendations regarding the type of water to be used in water-lubricated compressors. Manufacturers may specify the acceptable water quality parameters, treatment methods, or restrictions to ensure optimal performance and longevity of the compressor.

By considering the cleanliness, chemical composition, temperature, and appropriate water treatment measures, the type of water used in water-lubricated compressors can be optimized to meet the requirements specified by the manufacturer. Adhering to these restrictions helps ensure efficient and reliable operation of the compressor while minimizing the risk of component damage or performance issues.

air compressor

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Water-lubricated air compressors can be highly suitable for the food and beverage industries due to several reasons:

  1. Food-grade lubrication: Water is a natural and food-grade lubricant. It does not introduce harmful contaminants or chemicals into the production process, ensuring the safety and quality of food and beverage products. Water lubrication eliminates the risk of oil contamination in food products that can occur with oil-lubricated compressors.
  2. Compliance with hygiene standards: The food and beverage industries have strict hygiene standards and regulations. Water-lubricated air compressors align with these standards as water is a clean and sanitary lubricant. It minimizes the risk of cross-contamination and helps maintain a hygienic production environment.
  3. Reduced risk of product contamination: Water lubrication eliminates the possibility of oil carryover or oil vapor entering the compressed air system. This reduces the risk of oil contamination in food and beverage products, ensuring their purity and quality.
  4. Improved product shelf life: Oil-lubricated compressors can release oil aerosols or vapors that may negatively affect the taste, odor, or quality of food and beverage products. Water-lubricated compressors eliminate this concern, contributing to improved product shelf life and maintaining the desired sensory attributes.
  5. Easy cleanup and maintenance: Water lubrication simplifies cleanup and maintenance procedures in food and beverage production facilities. Water does not leave behind sticky residues or require extensive cleaning processes. It facilitates faster and more efficient cleaning, reducing downtime and improving overall productivity.
  6. Environmental friendliness: Water is a sustainable and environmentally friendly lubricant choice. It is non-toxic, biodegradable, and does not contribute to air or water pollution. Using water-lubricated air compressors aligns with the sustainability goals of the food and beverage industries.

Considering these factors, water-lubricated air compressors are well-suited for the food and beverage industries, ensuring compliance with hygiene standards, preventing product contamination, and promoting a safe and sustainable production environment.

China manufacturer Top Brand Oil Free Rotary Screw Air Compressors 75 kw   small air compressor China manufacturer Top Brand Oil Free Rotary Screw Air Compressors 75 kw   small air compressor
editor by CX 2024-05-17

China high quality DC48V 60V 72V 20bar 1500W 2hphigh Grade Brushless DC Motor Driven Air Compressor Silent Oil-Free Small Vehicle Mounted Air Compressor with Great quality

Product Description

  

Model

BST1500DC

BST1500/15DC

Rated Voltage  (V)

DC24V above

DC24V above

Input power(W)

≤1250

≤1250

Speed (r/min)

≥1700

≥1700

Rated pressure (KPa)

700KPa

1500KPa

Max pressure(KPa)

800KPa

1600KPa

Restart pressure (KPa)

0KPa

0KPa

Rated volume flow  (m3/h)

9.0m3/h @700KPa

2.4m3/h @1500KPa

Noise dB(A)

≤75dB(A)

≤75dB(A)

Ambient temperature  ºC

-5~40 ºC

-5~40 ºC

Insulation Class

B

B

Cold insulation resistance  (MΩ)

≥100MΩ

≥100MΩ

Voltage resistance

1500V/50Hz 1min  (No breakdown)

1500V/50Hz 1min  (No breakdown)

Net weight (Kg)

16Kg

16Kg

Installation Dimensions (mm)

246×127 mm( Install foot M8)

246×127 mm( Install foot M8)

External Dimensions (mm)

319×195×290mm

319×195×290mm

Typical application
Respirator (ventilator) oxygenerator
Disinfectant sprayer Blood analyzer
Clinical aspirator Dialysis / hemodialysis
Dental vacuum drying oven Air suspension system
Vending machines / coffee blenders and coffee machines Massage chair
Chromatographic analyzer Teaching instrument platform
On board access control system Airborne oxygen generator

      Why choose CHINAMFG air compressor
1. It saves 10-30% energy than the air compressor produced by ordinary manufacturers.
2. It is widely used in medical oxygen generator and ventilator .
3.  A large number of high-speed train and automobile application cases, supporting – 41 to 70 ºC, 0-6000 CHINAMFG above sea level .
4. Medium and high-end quality, with more than 7000 hours of trouble free operation for conventional products and more than 15000 hours of trouble free operation for high-end  products.
5. Simple operation, convenient maintenance and remote guidance.
6. Faster delivery time, generally completed within 25 days within 1000 PCs.

 

Machine Parts

Name: Motor 
Brand: COMBESTAIR 
Original: China
1.The coil adopts the fine pure copper enameled wire, and the rotor adopts the famous brand silicon steel sheet such as ZheJiang baosteel.
2.The customer can choose the insulation grade B or F motor according to What he wants.
3.The motor has a built-in thermal protector, which can select external heat sensor.
4.Voltage from AC100V ~120V, 200V ~240V, 50Hz / 60Hz, DC6V~200V optional ; AC motor can choose double voltage double frequency ; DC Motor can choose the control of the infinitely variable speed.

Machine Parts

Name: Bearing
Brand: ERB , CHINAMFG , NSK 
Original: China ect.
1.Standard products choose the special bearing ‘ERB’ in oil-free compressor, and the environment temperature tolerance from -50ºC to 180 ºC . Ensure no fault operation for 20,000 hours.
2.Customers can select TPI, NSK and other imported bearings according to the working condition.

Machine Parts

Name: Valve plates
Brand: SANDVIK
Original: Sweden
1.Custom the valve steel of Sweden SANDVIK; Good flexibility and long durability.
2.Thickness from 0.08mm to 1.2mm, suitable for maximum pressure from 0.8 MPa to 1.2 MPa.

Machine Parts

Name: Piston ring
Brand: COMBESTAIR-OEM , Saint-Gobain
Original: China , France
1.Using domestic famous brand–Polytetrafluoroethylene composite material; Wear-resistant high temperature; Ensure more than 10,000 hours of service life.
2.High-end products: you can choose the ST.gobain’s piston ring from the American import.

serial
number
Code number Name and specification Quantity Material Note
1 212571109 Fan cover 2 Reinforced nylon 1571  
2 212571106 Left fan 1 Reinforced nylon 1571  
3 212571101 Left box 1 Die-cast aluminum alloy YL104  
4 212571301 Connecting rod 2 Die-cast aluminum alloy YL104  
5 212571304 Piston cup 2 PHB filled PTFE  
6 212571302 Clamp 2 Die-cast aluminum alloy YL102  
7 7050616 Screw of cross head 2 Carbon structural steel of cold heading M6•16
8 212571501 Air cylinder 2 Thin wall pipe of aluninun alloy 6A02T4  
9 17103 Seal ring of Cylinder 2 Silicone rubber  
10 212571417 Sealing ring of cylinder cover 2 Silicone rubber  
11 212571401 Cylinder head 2 Die-cast aluminum alloy YL102  
12 7571525 Screw of inner hexagon Cylinder head 12   M5•25
13 17113 Sealing ring of connecting pipe 4 Silicong rubber  
14 212571801 Connecting pipe 2 Aluminum and aluminum alloy connecting rod LY12  
15 7100406 Screw of Cross head 4 1Cr13N19 M4•6
16 212571409 Limit block 2 Die-cast aluminum alloy YL102  
17 000402.2 Air outlet valve 2 7Cr27 quenching steel belt of The Swedish sandvik  
18 212571403 valve 2 Die-cast aluminum alloy YL102  
19 212571404 Air inlet valve 2 7Cr27 quenching steel belt of The Swedish sandvik  
20 212571406 Metal gasket 2 Stainless steel plate of heat and acidresistance  
21 212571107 Right fan 1 Reinforced nylon 1571  
22 212571201 Crank 2 Gray castiron  H20-40  
23 14040 Bearing 6006-2Z 2    
24 70305 Tighten screw of inner hexagon flat end 2   M8•8
25 7571520 Screw of inner hexagon Cylinder head 2   M5•20
26 212571102 Right box 1 Die-cast aluminum alloy YL104  
27 6P-4 Lead protective ring 1    
28 7095712-211 Hexagon head bolt 2 Carbon structural steel of cold heading M5•152
29 715710-211 Screw of Cross head 2 Carbon structural steel of cold heading M5•120
30 16602 Light spring washer 4   ø5
31 212571600 Stator 1    
32 70305 Lock nut of hexagon flange faces 2    
33 212571700 Rotor 1    
34 14032 Bearing 6203-2Z 2    

 


FAQ

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2: Our factory is located in Linbei industrial area No.30 HangZhou City of ZHangZhoug Province, China

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: Generally, 1000 pcs can be delivered within 25 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome

Q7:Can you accept non-standard customization?

A7:We have the ability to develop new products and can customize, develop and research according to your requirements

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Remote Guided Maintenance
Warranty: 2 Years
Principle: Mixed-Flow Compressor
Application: Back Pressure Type, Intermediate Back Pressure Type, High Back Pressure Type, Low Back Pressure Type
Performance: Low Noise, Variable Frequency, Explosion-Proof
Mute: Mute
Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Do Water-Lubricated Air Compressors Impact Compressed Air Quality?

Water-lubricated air compressors can have an impact on the quality of the compressed air they produce. Here’s a detailed explanation of how water-lubricated air compressors can affect compressed air quality:

Moisture Content:

  • Condensation: Water-lubricated compressors introduce moisture into the compressed air system. During the compression process, as the air cools downstream, moisture can condense and accumulate. This moisture can lead to issues such as corrosion, rust, and contamination of downstream equipment or processes.
  • Water Carryover: If the compressor’s water separation mechanisms are not efficient or if there are malfunctions in the water removal systems, water droplets or mist may carry over into the compressed air. This can negatively impact the quality of the compressed air and introduce moisture-related issues downstream.

Contamination:

  • Oil Contamination: In some water-lubricated compressors, there is a potential for oil to mix with the water used for lubrication. If oil and water emulsify or if there are leaks in the compressor system, oil contamination may occur. Oil-contaminated compressed air can have adverse effects on downstream processes, equipment, and products. It can lead to contamination, reduced performance of pneumatic components, and potential health and safety concerns.
  • Particulate Contamination: Water-lubricated compressors can introduce particulate matter, such as sediment, debris, or rust, into the compressed air system. This can occur if the water supply or water treatment systems are not adequately filtered or maintained. Particulate contamination can clog or damage pneumatic equipment, affect product quality, and cause operational issues in downstream applications.

Preventive Measures:

  • Water Separation: Water-lubricated compressors employ various water separation mechanisms to remove moisture from the compressed air. This includes moisture separators, water traps, or coalescing filters that are specifically designed to capture and remove water droplets or mist from the compressed air stream. Regular maintenance and inspection of these separation systems are necessary to ensure their proper functioning.
  • Air Treatment: Additional air treatment components, such as air dryers or desiccant systems, can be installed downstream of water-lubricated compressors to further reduce moisture content in the compressed air. These systems help to remove moisture that may have carried over from the compressor and ensure that the compressed air meets the required dryness standards for specific applications.
  • Proper Maintenance: Regular maintenance of water-lubricated compressors is essential to minimize the potential impact on compressed air quality. This includes routine inspection, cleaning, and replacement of filters, lubrication systems, and water separation components. Addressing any leaks, malfunctioning components, or system issues promptly can help maintain the integrity of the compressed air and prevent contamination or excessive moisture levels.

By implementing appropriate water separation mechanisms, air treatment systems, and maintenance practices, the impact of water-lubricated air compressors on compressed air quality can be minimized. It is important to consider the specific requirements of the application and follow industry standards and guidelines to ensure the desired compressed air quality is achieved.

air compressor

Are There Any Restrictions on the Type of Water Used in Water-Lubricated Compressors?

When it comes to water-lubricated compressors, there are certain restrictions and considerations regarding the type of water that can be used. Here’s a detailed explanation of the restrictions on the type of water used in water-lubricated compressors:

Water Quality:

  • Cleanliness: The water used in water-lubricated compressors should be clean and free from excessive impurities or contaminants. Impurities like sediment, minerals, or debris can cause blockages, wear, or damage to the compressor components. It is important to use water that meets the cleanliness requirements specified by the manufacturer.
  • Chemical Composition: The chemical composition of the water can also be a factor to consider. Water with high mineral content or hardness can lead to scale formation, which can affect the performance and lifespan of the compressor. Water treatment methods, such as water softening or filtration, may be necessary to maintain the desired water quality.

Water Temperature:

  • Freezing Point: In cold climates, it is important to ensure that the water used in the compressor’s lubrication system does not freeze. Freezing can cause operational issues and damage to the equipment. The water temperature should be maintained above freezing point through insulation, heating, or other suitable methods.
  • Temperature Range: Water-lubricated compressors may have specific temperature requirements to ensure optimal operation and lubrication. Operating the compressor with water temperatures outside the recommended range can affect its performance and lifespan. It is important to adhere to the manufacturer’s guidelines regarding the acceptable temperature range for the water used.

Water Treatment:

  • Water Treatment Systems: Depending on the quality of the available water supply, it may be necessary to use water treatment systems to ensure the water meets the required standards. Water treatment systems can help remove impurities, control chemical composition, and maintain the desired water quality for effective lubrication and cooling.
  • Water Treatment Frequency: Regular maintenance and monitoring of the water treatment systems are essential to ensure their effectiveness. The frequency of water treatment, such as filtration or chemical treatment, may vary depending on the specific conditions and the water quality in the area.

Manufacturer Recommendations:

  • Consulting the Manufacturer: It is important to consult the manufacturer’s guidelines and recommendations regarding the type of water to be used in water-lubricated compressors. Manufacturers may specify the acceptable water quality parameters, treatment methods, or restrictions to ensure optimal performance and longevity of the compressor.

By considering the cleanliness, chemical composition, temperature, and appropriate water treatment measures, the type of water used in water-lubricated compressors can be optimized to meet the requirements specified by the manufacturer. Adhering to these restrictions helps ensure efficient and reliable operation of the compressor while minimizing the risk of component damage or performance issues.

air compressor

Advantages of Using Water as a Lubricant in Air Compressors

Water can be used as a lubricant in air compressors, offering several advantages over traditional lubricants such as oils or synthetic lubricants. Here are some of the advantages:

  1. Cost-effective: Water is a readily available and inexpensive resource, making it a cost-effective lubricant option for air compressors. Compared to oils or synthetic lubricants, water is significantly cheaper, which can result in cost savings for businesses and industries that heavily rely on air compressors.
  2. Environmentally friendly: Water is a non-toxic and environmentally friendly lubricant. It does not contain harmful chemicals or pollutants that can contribute to air or water pollution. Using water as a lubricant in air compressors reduces the risk of contamination and minimizes the environmental impact associated with traditional lubricants.
  3. Improved heat dissipation: Water has excellent heat transfer properties. It can absorb and dissipate heat more efficiently compared to oils or synthetic lubricants. Air compressors generate heat during operation, and using water as a lubricant helps to dissipate this heat effectively, preventing overheating and prolonging the lifespan of the compressor.
  4. Reduced fire hazard: Compared to oils or synthetic lubricants, water has a significantly higher flash point, which means it is less likely to ignite or contribute to fire hazards. This fire-resistant property of water makes it a safer lubricant choice, especially in environments where fire safety is a concern.
  5. Lower maintenance requirements: Water does not leave behind sticky residues or deposits, as some oils or synthetic lubricants might. This characteristic reduces the maintenance requirements of air compressors. It simplifies the cleaning process and reduces the frequency of lubricant changes, resulting in reduced downtime and maintenance costs.

Overall, using water as a lubricant in air compressors can offer significant advantages in terms of cost-effectiveness, environmental friendliness, heat dissipation, fire safety, and maintenance requirements.

China high quality DC48V 60V 72V 20bar 1500W 2hphigh Grade Brushless DC Motor Driven Air Compressor Silent Oil-Free Small Vehicle Mounted Air Compressor   with Great qualityChina high quality DC48V 60V 72V 20bar 1500W 2hphigh Grade Brushless DC Motor Driven Air Compressor Silent Oil-Free Small Vehicle Mounted Air Compressor   with Great quality
editor by CX 2024-05-16

China manufacturer CHINAMFG UK Brand OEM Logo CHINAMFG 22kw 30kw 37kw Air-Compressors 116psi 145psi 100% Oil Free for Food Bottle Blowing small air compressor

Product Description

Geso UK brand all in 1 screw air compressor

 All in 1 screw air compressor of CHINAMFG has low loss, large displacement, high exquisite design and manufacture, reduces the workload of daily maintenance, perfectly replaces the reciprocating air compressor, can realize intelligent remote control, and makes tedious work easily.
 

Air End

1 CHINAMFG air compressor element selection of 40CrA high-quality alloy steel,with wear-resistant and corrosion-resistant and other high-quality performance.

2 Adopting BAES rotor profile developed by BAE Group,the third generation 5:6 asym metric tooth rotor,balanced force during high-speed operation,rotor tangential speed≤35m/s,rotor clearance between the rotors to maintain 0.003INCH,the same power section compressor element can save energy 10-15%.

3 CNC 5-axis rotor grinding machines are used for the production of CHINAMFG rotors,and the machining of polyhedra and curved surfaces is automated with high precision

 

Asynchronous Motors

1 Motor stator using die-casting silicon steel plate,diecasting length in the motor of 20%-40%,significantly improve the performance of the motor.

2 Motor windings with F-class insulation 155 ºC,B-class temperature rise assessment, using IP55 or more protection level.

3 Customized imported S-K-F bearings to reduce noise and heat.Ensure product reliability

 

Screw Compressor control and electrical system
 

1 RS485 communication mode transmission communication,data can be collected to integrate the user’s central console to monitor.

2 The intelligent controller to calculate the dynamic adjustment of the control accuracy,to achieve accurate control of the torque.

3 Cell phone,computer real-time display of operating parameters,maintenance remind  ers,energy management, data analysis,etc.

using Siemens/ABB and other brands of electrical systems.

 

Product Tag

Industrial All In One Screw Air Compressor

Energy Efficient Rotary Screw Air Compressor

Silent Operation Screw Air Compressor

Portable All In One Screw Air Compressor

Variable Speed Control Screw Air Compressor

Maintenance-Free Screw Air Compressor

Water-Cooled All In One Screw Air Compressor

Related Category

Oil-Injected Screw Air Compressor

Oil-Free Air Compressor

Medium and High Pressure Air Compressor

 

 

 

Product Description

Product Parameters

 

 

 

Certifications

Packaging & Shipping

Company Profile

Geso is a global aerodynamic systems group of companies, wholly owned by BAE CHINAMFG SYSTEMS, headquartered in London, United Kingdom, and a leader in the European gases sector.
BAE Systems, the parent company of CHINAMFG Group, was founded in 1871 and is committed to the research and development and production of industrial gases. In 2002, BAE Systems set up a representative office in China, importing products from the United Kingdom to China and deploying after-sales service offices in China, and in 2018 BAE Systems established a wholly-owned company “ZheJiang Geso systems Industrial PLC and invested 11 million U.S. dollars to build an intelligent manufacturing center; dedicated to research and development, production and market development. Our products include energy-saving screw air compressors, nitrogen/oxygen generators, dry oil-free air compressors, water-lubricated oil-free air compressors, mobile air compressors, process gas compressors, medium and high-pressure screw air compressors, centrifugal air compressors, etc., which are widely utilized in various production and industrial fields, and we have set up the “ZheJiang Geso systems Industrial PLC”, “ZheJiang Geso Equipment Co.,Ltd.”, “ZheJiang Geso Energy Equipment Co.,Ltd.” 3 companies, more than 30 branches and offices throughout the country, more than 200 distributors, for all walks of life to provide high-quality intelligent energy-saving air compressor system solutions.
Geso Group inherits the advanced technology and production management mode of British BAE Systems, combined with the Chinese market demand, in order to ensure the production safety of the user, strictly follow the Group’s product development process, each new product after 40 test items and 3000 hours of durability testing, to protect the quality of the product from the source; CHINAMFG compressor adopts the high quality screw compression element developed by BAE Systems, The material is used in the construction of large ships and nuclear submarines, which ensures the service life of the air compressor. The structure of the air compressor has been developed by the design team of BAE Group headquarters, which ensures the product quality and energy-saving effect. IE5 energy-saving motors, ABB electronic control system, and three-stage frequency conversion energy-saving system are selected to reduce energy consumption and carbon dioxide emissions, which saves costs for customers and realizes small investment and big power. Meanwhile, by optimizing the design and reducing the screw compression element’s speed, our air compressors have excellent silent performance. Independent research and development of intelligent Internet of Things (IoT) technology realizes the automatic and precise supply of air compressor and nitrogen generator equipment with the actual demand amount of the user to meet the automation experience of unattended, remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless docking and evaluation feedback. Convenient interconnected management with air compressors is realized through computers, cell phones and iPads. In addition, the reasonable construction and excellent workmanship of Geso reduces unnecessary maintenance work in normal times, making maintenance more convenient and efficient.
Through years of high-speed development, Geso Group has service outlets in more than 2 hundred cities across the country, 24-hour service hotline response and Internet warranty service. Thirteen direct spare parts warehouses to provide customers with repair services in a more rapid and timely manner.
After-sales service is not only limited to the product itself, but also includes a series of complete systematic services such as compressed air system testing and optimization, intelligent air supply control for air compressors, waste heat recovery, variable frequency piping, piping, cables, and construction turnkey projects. The service engineers not only undergo strict training and assessment, but also equipped with professional testing and maintenance tools to provide customers with quality service experience and escort production.
We are committed to a lifetime free of labor charges to reduce the user’s cost of use and avoid the phenomenon of indiscriminate charges. Based on our service concept to provide customers with free training services, regular testing of the user’s energy efficiency report data and develop energy-saving programs to ensure user satisfaction and energy-saving effect. For 3 consecutive years, we have been selected as 1 of the top 10 brands by third-party organizations such as China Brand Network.
As a global aerodynamic systems group of companies, we carry the mission of innovation, quality and service. Whether it is energy saving and environmental protection, quiet performance or intelligent, always adhere to the praise of the customer experience as the center of the hard workers, Geso, to create a global CHINAMFG brand of fluid machinery, and continue to become a high-end energy-saving products industry leader.
Timeline of Geso history

BAE MARCONI ELETRONIC SYSTEMS was founded in 1871 in London, England. In the same year, we developed and produced the first reciprocating compressor and devoted ourselves to the development and production of industrial gases.
In 1910, the company’s main business expanded to multiple areas: air compressors, nitrogen/oxygen air separation equipment, integrated electronic products, the company’s core product development of single-cylinder reciprocating air compressor technology and mass production.
In 1999, the company was founded as “BAE CHINAMFG SYSTEMS LTD” and developed the first twin-screw air compressor and established the brand “GESO SYSTEMS”.
In 2000, the company developed and produced the first dry-type oil-free screw machine into the market, and it is widely used in the European medical, food and electronic industries.
In 2002, BAE Group set up a representative office in China, products from the United Kingdom after the production of original imported equipment for the Chinese market expansion, and successfully entered the Chinese aerospace and high-precision machining field market.
In 2006, a total of 26 after-sales service operation outlets were built in each provincial capital city in China, fully deploying the after-sales service system to quickly respond to and safeguard users’ experience and production safety.
In 2016, a warehousing and logistics center was established in ZheJiang , China, to ensure the timely supply of complete machines and spare parts for the Chinese market.
In 2018, the British BAE Group registered in China to establish “ZheJiang Geso systems Industrial PLC” and set up a compressor assembly and production plant in ZheJiang , China at the same time, with a registered capital of 11 million U.S. dollars.
In 2571, ZheJiang Geso systems Industrial PLC. invested and established “ZheJiang Geso Equipment Co., Ltd.” and set up a nitrogen/oxygen air separation equipment sales company in HangZhou, and in the same year, set up the second phase of the project of 300 sets of nitrogen/oxygen equipments in ZheJiang factory. The R&D and production of nitrogen/oxygen control equipment was added.
In 2571, we invested in the establishment of “ZheJiang Geso Energy Equipment Co., Ltd.” and registered some of the former offices in provincial capitals as branches to complete the separation of production and sales, and to realize the high efficiency and convenience of national market development and service.
 

Our Advantages

Core components: the screw compression element adopts the British R & D BAES series screw compression element , the material is used in the United Kingdom in the construction of aircraft carriers, nuclear submarine construction , fine material to ensure that the service life of the air compressor, decades still as new; high-quality S K F bearings life as high as 100,000 (100 thousand) hours; the use of imported ASCO valves and CHINAMFG solenoid valves ABB electrical components, to ensure that the system is safe and stable operation for long periods of time.
Science and technology research and development: the structure of the air compressor is developed by the design team at the headquarters of BAE Group in the UK, so that the quality and energy saving of the air compressor is satisfactory to the users. The R&D personnel of the British headquarters total 220 people, dedicated to energy-saving system research and development funds of 1.5 million U.S. dollars per year, to ensure that the equipment of energy-saving products of superiority; air separation equipment selection of the German CHINAMFG controller and touch screen, flow, purity, pressure and dew point intuitively presented in the touch screen, the process and the action screen vivid image, at a glance, leaving the DCS remote ports, the data can be transmitted to a centralized control room and cell phone terminal. The data can be transmitted to the central control room and mobile phone;
Energy saving and environmental protection: IE5 energy-saving motors, ABB electronic control system, three-level frequency conversion (motor, fan, oil pump) energy-saving system, in the selection of materials and process design, the selection of special stainless steel management connection, the design of which ensures that the internal leakage of air compressor air volume ≤ 0.571m³/min, the use of imported fibers oil and gas separation technology and oil and gas barrel precision design, the reasonable location of the pipeline with the air compressor The internal pressure difference ≤ 0.003MPa, thus reducing energy consumption, reducing carbon dioxide emissions, reducing the use of cost, small investment, big power;
Strong silent performance: through the optimization of air compressor design and air compression element performance enhancement, reduce the air compression element speed, not only to extend the service life of the air compressor, and at the same time significantly reduce the noise generated by the equipment, CHINAMFG polyester fiber polymer material developed from the sound insulation cotton and customized rubber shock absorbers, the silent equipment to bring the protection of the equipment, equipment operators and production personnel to bring the health and safety of the guarantee;
High degree of automation: The company has independently developed intelligent Internet of Things technology combined with air compressor and nitrogen generator equipment, which collects data to the cloud data processor through 2G/4G/NB-loTLoRa/Ethernet, automatically matches the accurate supply of gas with the user’s actual demand, and realizes the automation experience of unmanned, remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless docking, and evaluation feedback. It realizes unattended remote alarm, maintenance reminder, energy consumption management, intelligent file, data analysis, seamless connection, evaluation and feedback.
Convenient maintenance: reasonable construction, fine workmanship, reduce the usual unnecessary maintenance, cleaning and maintenance is more convenient, in the special design process, so that the efficiency of the maintenance staff to improve, to protect the user to use the timeliness;
One-stop service: complete product range, one-stop service for air system and gas engineering.
Qualification and certification: Geso has obtained ISO14001 environmental management system, ISO45001 health management system and ISO9001 quality management system certification, certificate 0 oil-free certification, CE EU certification, air compressor energy-efficiency certification, 3A integrity system certification and other certificates from authoritative certification organizations, which can fully guarantee the safety of users, and has been highly recognized by the market and users. We are highly recognized by the market and users.

Product Manufacturing and Acceptance Standards
The design, manufacture, installation and acceptance of screw air compressor are all based on the relevant Chinese national standards (GB) and in accordance with the requirements of the following relevant standards, norms and regulations (but not limited to), with full consideration of the impact of local environmental conditions and conditions of use.

No. Standard Item
1 GB150-1998 Steel Pressure Vessels
2 GB151-1998 Steel Shell and Tube Heat Exchangers   
3 JB/T4709  Steel Pressure Vessel Welding Regulations     
4 GB/T13278 Technical conditions for general screw air compressors
5 GBJ78 Noise hygiene standards for industrial enterprises  
6 GB3853 Test Methods for Pneumatic Compressor Performance for General Use
7 GB4980 Determination of sound power level of volumetric compressor noise – Engineering method   
8 JB8-82  Product Labeling   
9 ASME-PTC-9-1970
(American Society of Mechanical Engineers standards)
Air compressor performance test standards
10 VDI-2056 (Standard of the Association of German Engineers) Operating Vibration Test Standards
11 ISO-2151 (International Organization for Standardization standard) Operating Noise Test Standards
12 GBJ29-90 Compressed air station design specification
13 GB3323-87 Radiographic and quality analysis of steel melting welded joints
14 GB4720 Electrical Control Equipment Part I Low Voltage Electrical Control Equipment  
15 JB4127 Mechanical Seal Technical Condition 3 Main Technical Data

 

After Sales Service

1 Technical services: regardless of pre-sale, sale, after-sale, as long as the user side demand equipment technical help and consulting, the company will be accurate within 24 hours to provide relevant technical information free of charge.
2 After the successful on-site start-up and commissioning acceptance, our after-sales engineers are responsible for the user’s operators to carry out routine and emergency operation training.
3 Under normal operation, maintenance and repair of the equipment, the whole unit is guaranteed for 1 year, and the air compression element is guaranteed for 5 years. During the warranty period, the non-wearable parts in the unit, damage or failure under normal use, are gratuitous compensation, free of charge replacement.
4 Regardless of the warranty period inside and outside, my company will be on schedule to the factory inspection of gas purity, flow, pressure, voltage, current, screws tightness, etc. are to do a comprehensive test in a timely manner to understand the dynamics of the unit’s operation, such as receiving the notification of the user’s equipment failure, on-call.
5 In normal operation, my company will be monthly, quarterly and regularly arranged for the user to telephone or after-sales engineers to the scene to do the equipment operation visit work, timely understanding of the unit operation dynamics, received the user equipment failure notification, the office to immediately give a telephone reply, within 1 hour to the scene to deal with. Office in the field can not deal with the situation, the ZheJiang head office will be sent directly to the scene within 24 hours to deal with after-sales engineers. In order to ensure the long-term stability of the equipment work.
6 Spare parts service: In case of damage to tubing parts, Geso will solve the problem first, then determine the responsibility, and then talk about the price, and then replace the parts after the problem is solved.
7 Free labor fee, Geso company lifetime free labor fee, reduce the user cost of use, to avoid the phenomenon of indiscriminate charging.
8 Service quality assurance: the company’s after-sales service personnel in the headquarters of the Geso after systematic training and strict examination to obtain technical certificates to ensure that each after-sales service personnel’s ability to deal with technology.
9 Service outlets: the company has after-sales service outlets in most areas of China, to ensure that the user’s problems are solved in a short period of time and there is a storage center in the after-sales service outlets to ensure the timely supply of spare parts.
10 Free training service: Geso company through the site operation training to ensure the correct use of the user operator, Geso company will be adjusted for the user personnel, re-training on-site personnel operation, each training are not charged any fees.
11 Energy-saving services: If you buy our product line, our company will regularly test the user energy efficiency report data, energy-saving data distraction and develop programs, timely energy-saving adjustments to the equipment, to protect the user’s energy savings and cost reductions.
 

Customer Cases

No. Customers company name Quantities
1 HangZhou Risen Electromechanical Co.,Ltd. 5 units
2 HangZhou Nuoyi Laser Equipment Co.,Ltd. 3 units
3 ZHangZhoug Luneng Renewable Resources Co.,Ltd. 4 units
4 HangZhou Renliang Medical Machinery Equipment Co.,Ltd. 2 units
5 ZheJiang CHINAMFG Limited Liability Company 6 units
6 HangZhou CHINAMFG Machinery Co.,Ltd. 1 unit
7 HangZhou CHINAMFG Trading Co.,Ltd. 1 unit
8 ZheJiang Veneta Clothing Co.,Ltd. 1 unit
9 ZheJiang CHINAMFG Intelligent Equipment Co.,Ltd. 7 units
10 HangZhou CHINAMFG Construction & Installation Engineering Co.,Ltd.  6 units
11 ZheJiang Zhongfa Environmental Protection Co.,Ltd. 6 units
12 ZheJiang CSIC Lingang Shipbuilding Equipment Co.,Ltd. 2 units
13 ZheJiang Wangxin Soybean Products Equipment Co.,Ltd. 2 units
14 ZheJiang Zhi Fu Pharmaceutical Technology Partnership (Limited Partnership) 2 units
15 Hongli Shoe Material 5 units
16 HangZhou HangZhoun Metal Products Co.,Ltd. 6 units
17 ZheJiang CHINAMFG Logistics Machine Co.,Ltd. 3 units
18 ZheJiang Qiangxiong Construction Group Co.,Ltd. 5 units
19 HangZhou CHINAMFG Logistics Machine Co.,Ltd.   4 units
20 Hongzheng Electric Co.,Ltd. 3 units
21 HangZhou Hengjun Technology Co.,Ltd. 3 units
22 ZheJiang Dajing Biological Engineering Co.,Ltd. 5 units
23 HangZhou Yi Ai Electronic Technology Co.,Ltd. 7 units
24 ZheJiang Shengwei Bio-technology Co.,Ltd. 2 units
25 ZheJiang Jiuding New Material Co.,Ltd. 4 units
26 HangZhou Xitu Environmental Protection Technology Co.,Ltd. 2 units
27 ZheJiang Taiqing Mechanical & Electrical Co.,Ltd. 3 units
28 HangZhou Guitai Pipe Industry Co.,Ltd. 6 units
30 HangZhou Przeszler Advanced Molding Technology Co.,Ltd. 4 units
31 HangZhou CHINAMFG Thermal Power Co.,Ltd. 1 unit
32 HangZhou Tellier Environmental Protection Group Co.,Ltd. 1 unit
33 ZheJiang CHINAMFG Electric Power Design & Consulting Co.,Ltd. 3 units
34 HangZhou Hongfengde Auto Parts Co.,Ltd. 2 units
35 ZheJiang ZHangZhoug Mining Group Company Limited Danying Coal Mine, Gubao Township, Xiwen County 6 units
36 ZheJiang Zhongmin Da Zheng Surface Engineering Technology Co.,Ltd. 4 units
37 NDT Group YuHangZhou Environmental Protection Equipment Manufacturing Co.,Ltd. 4 units
38 ZheJiang Vimet Decoration Material Technology Co.,Ltd. 3 units
39 Kangyue Biotechnology Co.,Ltd. 2 units
40 HangZhou Kangcai Medical Supplies Co.,Ltd. 5 units
41 Dejuxin Energy Saving Technology (HangZhou) Co.,Ltd. 3 units
42 HangZhou CHINAMFG Packaging Industry Co.,Ltd. 2 units
43 HangZhou Tianlai Environmental Protection Equipment Co.,Ltd.  6 units
44 HangZhou Yongzhengxin Hardware Machinery Factory 3 units
45 HangZhou Industrial Park Shunhao Machinery Factory 2 units
46 HangZhou Chemical Machinery Manufacturing Co.,Ltd. 2 units
47 HangZhou Dehai Environmental Protection Technology Development Co.,Ltd. 3 units
48 ZheJiang Maosheng Environment Co.,Ltd. 1 unit
49 Air Force Engineering University Aviation Engineer Officer School 1 unit
50 ZheJiang Tiantuo Equipment Manufacturing Co.,Ltd. 1 unit
51 HangZhou Chemical Machinery Manufacturing Co.,Ltd. 2 units
52 HangZhou HangZhou Clothing Co.,Ltd. 2 units
53 HangZhou CHINAMFG Glass Co.,Ltd. 2 units
54 HangZhou City HangZhou Xihu (West Lake) Dis.ent City Development and Management Co.,Ltd. 2 units
55 HangZhou Sunshine CHINAMFG Chemical Engineering Co.,Ltd. 3 units
56 HangZhou CHINAMFG Electric Appliance Manufacturing Co.,Ltd. 4 units
57 HangZhou Xihu (West Lake) Dis. Electric Co.,Ltd. 3 units
58 HangZhou Saida Construction Machinery Co.,Ltd. 2 units
59 HangZhou Tellier Environmental Protection Co.,Ltd. 1 unit
60 ZheJiang Lvjing Environmental Protection Technology Engineering Co.,Ltd. 1 unit
61 China Construction Third Bureau Second Construction Engineering Co.,Ltd. 1 unit
62 HangZhou Przeszler Advanced Molding Technology Co.,Ltd. 1 unit
63 HangZhou Bochuang Environmental Protection Technology Co.,Ltd. 2 units
64 HangZhou Hi-Tech Zone Azure Environmental Protection Technology Co.,Ltd. 1 unit
65 ZheJiang Renze Technology Co.,Ltd. 1 unit
66 Dejuxin Energy Saving Technology (HangZhou) Co.,Ltd. 1 unit
67 ZheJiang Haibelian Kaihe Roofing Engineering Co.,Ltd.  1 unit
68 ZheJiang Xihu (West Lake) Dis. Technology Co.,Ltd. 2 units
69 HangZhou Huagong CHINAMFG Electronics Co.,Ltd. 1 unit
70 HangZhou Oriental Environmental Engineering Research Institute Co.,Ltd. 2 units
71 HangZhou Hi-Tech Zone Azure Environmental Protection Technology Co.,Ltd. 2 units
72 HangZhou Bochuang Environmental Protection Technology Co.,Ltd. 1 unit
73 ZheJiang Prime New Energy Technology Co.,Ltd. 3 units
74 Daiko International Trading (ZheJiang ) Co.,Ltd. 1 unit
75 ZheJiang Qiangxiong Construction Group Co.,Ltd. 3 units
76 HangZhou Kelen Commercial Equipment Co.,Ltd. 2 units
77 ZheJiang Bigo Electromechanical Equipment Co.,Ltd. 2 units
78 ZHangZhoug Qier Electromechanical Technology Co.,Ltd. 4 units
79 HangZhou Xihu (West Lake) Dis.deli Biotechnology Co.,Ltd.  3 units
80 ZheJiang Normal University 1 unit
81 Jumin Biotechnology Co.,Ltd.  3 units
82 HangZhou Sanfengqiao Foodstuffs Co.,Ltd. 3 units
83 HangZhou Jinji Strong Magnetic Co.,Ltd. 1 unit
84 ZheZheJiang di Industrial Co.,Ltd. 1 unit
85 Zhongtian Chaolong Technology Co.,Ltd. 3 units
86 ZheJiang WHangZhou Pharmaceutical Co.,Ltd. 1 unit
87 ZheJiang Hadajiang Liquor Liability Company 1 unit
88 Jacoby Environmental Materials Technology (ZheJiang ) Co.,Ltd. 5 units
89 HangZhou CHINAMFG Construction & Installation Engineering Co.,Ltd.  1 unit
90 ZHangZhoug Province Mechanical and Electrical Design and Research Institute Co.,Ltd. 1 unit
91 HangZhou CHangZhou District Hengwei Machinery Trading Co.,Ltd. 1 unit
92 ZheJiang Jiao Tong University 2 units
93 Chang Xihu (West Lake) Dis. (Individual) 2 units
94 HangZhou Xihu (West Lake) Dis.wang Paper Co.,Ltd.  3 units
95 HangZhou CHINAMFG Mould Technology Co.,Ltd.  2 units
96 HangZhou Institute of Technology 1 unit

FAQ 

 

[Q]: Are you a manufacturer or a trade company?
A : We are a factory, and we have our own factory in ZheJiang , we market our own products.

 

 

[Q]: What is your lead time?
A :Usually we will spend about 30 working days to make it.

 

 

[Q]: What is the shipping port?
A :ZheJiang ,HangZhou or HangZhou

 

[Q]: How can I get your quotation?
A : We will provide the quotation according to your request as soon as possible.
Before quotation, We would like to know:
1 you are end user or mid-buyer(agent, distributor,Supporting Enterprise or designing institute etc.)
2 if you are end user, what industry are you in?
3 have you bought such equipment before, what brand?
4Direction of use (where the compressor is used, what equipment it supplies)
5 What delivery volume, delivery pressure, whether frequency conversion, whether with after-treatment equipment do you want?
6 Have you ever heard about our brand:GESO

 

[Q]: What is your Quality assurance system?
A : ZheJiang Geso systems Industrial PLC is a wholly foreign-owned enterprise, and is also the authorized base for the production and assembly of screw compressors by BAE Systems in the UK. The company has passed ISO9001:2015 quality system certification of enterprises, ISO45001:2018 health and safety management system and ISO14001:2015 environmental management system and many other certifications. The company, from the chairman to every employee, has been trained in the world’s advanced quality system in order to obtain the induction certificate. Every year, we need to be reviewed and recognized by the certification body, and strictly in accordance with the certification system for each link in the strict day-to-day management of its products, procurement, inspection, testing, installation and commissioning of the whole machine are strictly in accordance with the ISO9001 program, to ensure that each compressor embodies the factory should be the quality and reliability of the company’s products with a high starting point, high-speed start, with a high reputation and high quality! The company’s products have a high starting point and high speed to start, with high reputation and high quality to win the trust of users from all walks of life. The company’s products to implement the 3 bags, 3 bags for 1 year. The company shall bear the replacement cost of parts, repair cost and transportation and miscellaneous cost of equipment round trip (except perishable parts such as 3 filters, lubricating oil and external auto-drainer) during the warranty period of the supplied equipments. If the rework or equipment damage is caused by our company’s drawings, data, technical documents errors or technical service personnel on-site guidance, our company is immediately responsible for free repair or replacement.

 

[Q]: What does your brand “GESO” mean?
A : Gas: Description of Geso products characterized as equipment for applications in the field of all types of gas processes.

Efficient: Design, innovation and development of a full range of products for the purpose of energy saving.

Stability: to ensure the user’s production safety and stability as a prerequisite requirement

OPTIMUM : to build a world-renowned brand of fluid machinery, and continue to become the industry leader in high-end energy-saving products.

Systems : the business philosophy centered on the praise of service customer experience. CHINAMFG provides compressors, after-treatment, pressure vessels, installation piping, intelligent cloud, air separation equipment and other series of products, providing users with one-stop product services; from pre-sales program design, installation of equipment during the sale, after-sales maintenance to create a full-system operation and service team.

 

Air Compressor Frequently Asked Questions

The following items are some of the most frequently asked air compressor questions and answers, courtesy of CHINAMFG systems.

How Does an Air Compressor Work?

An air compressor works by using electric power to create pressurized air that can then be released and converted to usable power for use in a number of applications, depending on your specific needs. It performs this by compressing air within a chamber by means of a piston, rotary vane or screw or scroll element and then releasing this pressurized air into your downstream receivers and distribution piping system.

How Do You Use an Air Compressor?

Follow these simple steps to use your air compressor safely and efficiently:

1. Check the oil level: For oil-filled compressors, check that the oil level reaches about ⅔ of the way up the dipstick.

2. Prepare the compressor: Attach hoses, plug into a grounded outlet, check the drain valve and flip the power switch.

3. Adjust the pressure regulator: Set the pressure to match the level your air tool requires.

4. Operate your device: The tank will refill as you use your tool.

5. Complete proper cleanup: Turn off the compressor to drain the pressure and open the air tank drain valve to clear out condensation.

What Does an Air Compressor Do?

Air compressors provide compressed air for applications such as filling gas cylinders with high-pressure clean air, providing pressurized clean air for operating pneumatic CHINAMFG systems or tools, filling tires and a wide variety of other applications across industries like automotive, medical, food and beverage, petroleum, pharmaceutical and more.

What Do You Use an Air Compressor For?

Air compressors can be used for many personal and professional applications. A few at-home uses include:

· Blowing up balloons

· Pumping up tires for bikes and vehicles

· Inflating pool accessories and air mattresses

· Refilling deflated sports equipment

· Pressure washing

· Powering tools for sanding, polishing and other types of crafting

· Painting with an airbrush or sprayer

Many businesses rely on air compressors to accomplish work safely and efficiently. Some industries that use compressors include:

· Agriculture

· Manufacturing

· Automobiles

· Pharmaceutical

· Food and beverage

· Dental and medical

· Construction

How Much Is an Air Compressor?

Air compressors can cost anywhere from $125 to $2,000. The price of an air compressor depends on many factors, including:

· PSI and CFM: Pounds per square inch (PSI) measures how much force an air compressor has, while cubic feet per minute (CFM) measures the flow.

· Duty cycle: This percentage indicates how long the compressor can provide air during a cycle.

· Life span: Compressors can last between 15,000 to 60,000 hours, depending on their use and size.

The type of compressor you need and how much you will pay for it will depend on your industry or personal needs.

How Often Do I Need to Change the Oil in My Air Compressor?

If you have a lubricated reciprocating, rotary screw or rotary vane air compressor, you’ll need to change the oil from time to time to keep it working properly. The recommended schedule is generally 3 months, subject to the manufacturer’s recommendation. For a rotary screw compressor, you’ll want to change the oil every 4,000 to 8,000 hours depending on the type of oil employed.

Do Air Compressors Run Out of Air?

If you run a regular duty cycle with an appropriate load, you will always have the air you need. As you use your tool, the pressure switch will detect the drop in pressure and start the compressor. Once the tank has refilled to the preselected pressure point, the compressor will shut off. The pressure switch will manage this function throughout the time you’re using an air tool.

If you attach a tool with an air requirement that is too great for the tank, you run the risk of emptying your air tank and having to wait for the compressor to refill it to a usable level. Always check your air compressor’s capabilities and your tool’s required pressure before connecting them.

Do I Need an Air Dryer in Addition to My Air Compressor?

It’s often a good value for you to add an air dryer to your air compressor system, as your air compressor can put a great deal of water into the compressed air system. Your air dryer could potentially remove gallons of water each day.

How Do I Control Contaminants in My Compressed Air System?

It’s important to have an effective air filtration system to keep your compressed air clean. CHINAMFG systems can provide you with all the air filters you need to help keep your compressed air clean.

How Often Do I Need to Replace My Air Intake Filter?

Air compressors with air intake filters need to be cleaned weekly. If your filter has built up so much debris that you can’t get it completely clean, or the filter is torn, you should replace it right away.

How Do I Control the Dew Point of My Compressed Air System?

If you’re worried about hitting the dew point, a quality air dryer should be the solution.

What Is the Correct Voltage for My Air Compressor?

Usually, 110 volts is sufficient for a small compressor. Larger compressors may take as much as 460 volts.

How Do I Drain the Water From My Tank?

You can drain your tank water manually or purchase an automatic drain valve to remove the water automatically. If water is becoming a big problem, consider investing in a more appropriately-sized air dryer.

What Is the Right Type of Hose for My Air Compressor?

It depends on the air compressor, but typically, they take a 1/4″ or 3/8″ hose. Your Geso systems professional can help you match the right hose to your compressor.

Do I Need a Reciprocating Compressor or a Rotary Screw Compressor?

For most applications, a reciprocating compressor is sufficient. If you need a compressor that runs continuously day and night, you need a rotary screw compressor.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Screw
Samples:
US$ 5500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Do You Ensure Proper Water Lubrication in Air Compressors?

Proper water lubrication in air compressors is essential for maintaining their performance, efficiency, and longevity. Here’s a detailed explanation of how to ensure proper water lubrication:

  1. Use High-Quality Water: Start by using high-quality water for lubrication. Ideally, the water should be clean, free from impurities, and have the appropriate chemical composition. Impurities or contaminants in the water can lead to increased wear, corrosion, and blockages in the compressor. Water treatment or filtration systems may be necessary to ensure the desired water quality.
  2. Monitor Water Supply: Ensure a consistent and adequate water supply to the compressor. Monitor the flow rate and pressure of the water supply to ensure it meets the requirements of the compressor’s lubrication system. Insufficient water flow can lead to inadequate lubrication, increased friction, and potential damage to the compressor components.
  3. Implement Proper Water Cooling: Compressed air generates heat during the compression process, and effective cooling is crucial to maintain safe operating temperatures and proper water lubrication. Ensure that the cooling mechanisms, such as water jackets or external cooling systems, are properly designed and sized to provide adequate cooling capacity. Monitor and control the water temperature to prevent overheating and ensure optimal lubrication.
  4. Optimize Water Distribution: Proper water distribution within the compressor is essential for effective lubrication. Ensure that the water is evenly distributed to all the necessary lubrication points, such as the bearings or other moving parts. Proper design and installation of water distribution systems, including pipes, fittings, and nozzles, are important to achieve uniform water distribution and prevent any dry spots or inadequate lubrication.
  5. Regular Maintenance: Implement a regular maintenance schedule for the water lubrication system. This includes periodic inspection and cleaning of water filters, strainers, or screens to prevent clogging and maintain proper water flow. Check for any leaks or malfunctions in the water distribution system and promptly address them. Regularly monitor water quality and perform any necessary water treatment or filtration to maintain optimal lubrication conditions.
  6. Follow Manufacturer Guidelines: Always follow the manufacturer’s guidelines and recommendations for water lubrication. Manufacturers provide specific instructions regarding water quality, flow rates, cooling requirements, and maintenance procedures for their compressors. Adhering to these guidelines ensures that the compressor operates within its intended parameters and maintains proper water lubrication.

By following these practices, you can ensure proper water lubrication in air compressors, promoting efficient operation, minimizing wear and tear, and extending the lifespan of the equipment. Regular monitoring, maintenance, and adherence to manufacturer guidelines are crucial to optimize water lubrication and overall compressor performance.

air compressor

How Are Water-Lubricated Air Compressors Used in Automotive Applications?

Water-lubricated air compressors find various applications in the automotive industry. Here’s a detailed explanation of how they are used in automotive applications:

Tire Inflation:

  • Service Stations: Water-lubricated air compressors are commonly used in automotive service stations for tire inflation. They provide a reliable source of compressed air for quickly and efficiently inflating tires to the recommended pressure. The water lubrication system in these compressors helps to reduce friction and wear on internal components, ensuring smooth operation and extended lifespan.
  • Tire Shops: Tire shops often utilize water-lubricated air compressors as part of their tire service equipment. These compressors can supply compressed air for tire inflation, tire mounting and demounting machines, and other pneumatic tools used in tire service and maintenance.

Painting and Finishing:

  • Spray Painting: Water-lubricated air compressors are also used in automotive painting and finishing processes. Compressed air is used to power spray guns that apply paint or coatings to vehicles during the painting process. The water lubrication system helps maintain the cleanliness of the compressor and prevents oil contamination, ensuring high-quality paint finishes.
  • Sanding and Polishing: Compressed air is often used for sanding and polishing automotive surfaces. Water-lubricated air compressors provide a reliable source of compressed air for pneumatic sanders, polishers, and other air-powered tools used in automotive surface preparation and refinishing.

Brake and Suspension Systems:

  • Brake Bleeding: Water-lubricated air compressors can be used during brake bleeding procedures in automotive repair and maintenance. Compressed air is used to purge air bubbles from the brake system, ensuring optimal brake performance and pedal feel. The water lubrication system helps maintain the purity of the compressed air, preventing contamination that could affect the brake system’s functionality.
  • Suspension Systems: Air suspension systems in vehicles often rely on compressed air for operation. Water-lubricated air compressors provide a continuous supply of clean and lubricated compressed air for inflating and maintaining the air springs or airbags used in vehicle suspensions.

Diagnostic and Testing Equipment:

  • Diagnostic Tools: Water-lubricated air compressors are utilized in automotive diagnostic and testing equipment. Compressed air is used to operate pneumatic diagnostic tools, such as vacuum testers, pressure gauges, and leak detectors, that help diagnose and troubleshoot various vehicle systems.
  • Testing and Calibration: Automotive testing and calibration equipment, such as dynamometers and emission testing devices, often require a source of compressed air. Water-lubricated air compressors supply the necessary compressed air for precise and accurate testing of vehicle performance, emissions, and other parameters.

Overall, water-lubricated air compressors play a significant role in various automotive applications, including tire inflation, painting and finishing, brake and suspension systems, and diagnostic and testing equipment. Their use helps ensure efficient and reliable operation, improved productivity, and high-quality results in automotive service, repair, and manufacturing processes.

air compressor

Are Water Lubrication Air Compressors More Environmentally Friendly?

Water lubrication in air compressors offers several environmental benefits compared to traditional lubrication methods. Here are some reasons why water lubrication is considered more environmentally friendly:

  1. Non-toxic and biodegradable: Water is a natural substance that is non-toxic and biodegradable. It does not contain harmful chemicals or additives that can pollute the air or water systems. When water lubricants are used in air compressors, there is a reduced risk of environmental contamination.
  2. Reduced air pollution: Traditional lubricants, such as oils or synthetic lubricants, can release volatile organic compounds (VOCs) into the air during operation. VOCs contribute to air pollution and can have detrimental effects on human health and the environment. Water lubrication eliminates the release of VOCs, resulting in improved air quality and reduced air pollution.
  3. Minimized water pollution: Water lubrication does not introduce additional pollutants into water systems. Unlike oils or synthetic lubricants, water does not leave behind harmful residues or contaminants that can contaminate water sources. This helps to protect aquatic ecosystems and maintain water quality.
  4. Energy efficiency: Water lubrication can contribute to energy efficiency in air compressors. Water has excellent heat transfer properties, allowing for efficient dissipation of heat generated during compressor operation. By effectively managing heat, water lubrication helps to reduce energy consumption and improve overall compressor efficiency.
  5. Sustainable resource: Water is a renewable resource that is readily available in nature. Unlike oil or synthetic lubricants, which require extraction and processing, water can be sourced sustainably. This reduces the reliance on finite resources and promotes a more sustainable approach to lubrication in air compressors.

Overall, water lubrication in air compressors is considered more environmentally friendly due to its non-toxic nature, reduced air and water pollution, energy efficiency, and sustainable resource usage.

China manufacturer CHINAMFG UK Brand OEM Logo CHINAMFG 22kw 30kw 37kw Air-Compressors 116psi 145psi 100% Oil Free for Food Bottle Blowing   small air compressor China manufacturer CHINAMFG UK Brand OEM Logo CHINAMFG 22kw 30kw 37kw Air-Compressors 116psi 145psi 100% Oil Free for Food Bottle Blowing   small air compressor
editor by CX 2024-05-15

China Custom 220V/380V/440V/50Hz/60Hz Dental Oil Free Air Compressor small air compressor

Product Description

Frame Type Oil free scroll air compressor with  Tank

 

Rated pressure 
                   
0.8MPa                                   
Max. pressure 1.0MPa
Air flow 0.6L/min
Drive mode Direct drive
Exhaust air temperature 160ºC
Power 5.5KW
Speed 2850r/min
Weight 150KG
Size 730x540x533mm
Tank 3L
 

Why choose oil free scroll air compressor?

–Smaller footprint, save more space in compressor room
–Fewer components, higher reliability
–Lower sound level, healthy work environment
–Perfectly applicable to all industries
–Less consumables, longer service life
–No metal friction, less maintenance
–Oil-free compression, no pollution
–Zero emission, green and environmental-friendly

Features

Multi Drive Control
Depending on the air requirement, the PC board controls the running of the number of scroll heads. This function not only saves energy but also optimises the operation by keeping to the required pressure.
Low Noise
This compressor compresses air by the scroll head which generates a low noise level between the range of 45dB[A] to 61dB[A], similar to the library and meeting room environment.
Low Vibration
The scroll compressor vibration is so low that when placing pencils in standing position on the compressor top panel, they remain standing even during operation.
Space Saving
This scroll compressor can save space by being installed flat against the wall.
Easy Maintenance
The well designed structure enables easy maintenance. The replacement of air filter only needed at every 2,5
 
 
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Transport Package: Standard Export Packing
Specification: 5.5KW
Trademark: Leadway
Origin: China

air compressor

What Industries Commonly Use Water-Lubricated Air Compressors?

Water-lubricated air compressors find applications in various industries where specific operating conditions or regulatory requirements make them a preferred choice. Here are some industries that commonly utilize water-lubricated air compressors:

  • Food and Beverage: Water-lubricated compressors are often used in the food and beverage industry due to their ability to provide clean, oil-free compressed air. Compressed air is widely used in food processing and packaging applications, such as pneumatic conveying, product mixing, bottle blowing, and food packaging. Water-lubricated compressors help maintain product purity, prevent oil contamination, and comply with stringent food safety standards.
  • Pharmaceutical and Healthcare: The pharmaceutical and healthcare industries have strict requirements for compressed air quality, especially in applications where compressed air comes into direct contact with pharmaceutical products or is used in critical medical equipment. Water-lubricated compressors offer a viable solution by providing lubrication without the risk of oil contamination. They are commonly used for processes such as air agitation, medical device manufacturing, and laboratory applications.
  • Electronics and Semiconductors: In electronics and semiconductor manufacturing, where sensitive components and cleanroom environments are involved, oil-free compressed air is essential. Water-lubricated compressors can provide the required level of air purity without introducing oil particles or vapors that could contaminate the electronics or semiconductor production processes. They are used in applications such as chip manufacturing, circuit board assembly, and cleanroom air supply.
  • Textile and Garment: Water-lubricated compressors are utilized in the textile and garment industry, where the presence of oil can negatively impact the quality and appearance of fabrics or garments. Compressed air is widely used in textile machinery for tasks such as spinning, weaving, and air jet looms. Water-lubricated compressors ensure oil-free air supply, preventing oil stains or contamination that could affect the final textile or garment products.
  • Environmental and Wastewater Treatment: Water-lubricated compressors are also employed in environmental and wastewater treatment applications. These compressors help supply air for aeration processes in wastewater treatment plants, where air is introduced into the treatment tanks to facilitate the growth of beneficial bacteria for biological treatment. Water-lubricated compressors provide oil-free compressed air, ensuring the purity and effectiveness of the treatment process.

While the industries mentioned above commonly use water-lubricated air compressors, it is important to note that these compressors may also find applications in other sectors where oil-free, contamination-free compressed air is required for specific processes or environmental considerations.

air compressor

Are There Any Potential Water-Related Issues with These Compressors?

Yes, there are potential water-related issues that can arise with water-lubricated compressors. Here’s a detailed explanation of some of the common water-related issues associated with these compressors:

Corrosion:

  • Internal Corrosion: Water-lubricated compressors are susceptible to internal corrosion due to the presence of water within the system. If the water used is not properly treated or if corrosion prevention measures are insufficient, the internal components of the compressor can corrode over time. Corrosion can lead to reduced performance, component damage, and the potential for leaks or system failures.
  • External Corrosion: External components such as piping, valves, and fittings can also be affected by corrosion if exposed to water and moisture. Corrosion on these external surfaces can lead to compromised integrity, leaks, and reduced system efficiency.

Water Quality:

  • Water Contaminants: The quality of the water used in water-lubricated compressors is crucial. If the water contains contaminants such as sediment, debris, oil, or chemicals, it can negatively impact the performance and reliability of the compressor. Contaminants can cause blockages, clogging, increased wear on components, reduced lubrication effectiveness, and potential damage to the compressor.
  • Water Hardness: Water hardness, characterized by high mineral content, can lead to scaling and deposits within the compressor and associated components. Scaling can restrict flow, impede heat transfer, and reduce the efficiency of the compressor. It can also contribute to fouling and corrosion issues.

Water Treatment and Filtration:

  • Inadequate Water Treatment: Insufficient or improper water treatment can lead to various issues. If the water is not adequately treated for contaminants, hardness, or pH levels, it can result in accelerated corrosion, scaling, fouling, and reduced lubrication effectiveness. Inadequate water treatment can also contribute to increased maintenance requirements and decreased overall compressor performance.
  • Filtration System Issues: Filtration systems play a crucial role in removing contaminants from the water. However, if the filtration system is not properly maintained, filters become clogged or damaged, or if there are design or installation issues, it can lead to inadequate filtration and compromised water quality. This can result in the accumulation of contaminants, reduced lubrication performance, and potential damage to the compressor.

Water Supply and Availability:

  • Insufficient Water Supply: Water-lubricated compressors rely on a consistent and reliable water supply. If the water supply is insufficient in terms of flow rate, pressure, or quality, it can impact the compressor’s operation and performance. Inadequate water supply can lead to inadequate lubrication, reduced cooling capacity, and increased wear on components.
  • Water Source Availability: The availability of a suitable water source is essential for water-lubricated compressors. In certain locations or applications, accessing clean water or meeting specific water quality requirements may pose challenges. Lack of a suitable water source can limit the feasibility or effectiveness of using water-lubricated compressors.

It is important to address these potential water-related issues by implementing proper water treatment, corrosion prevention measures, regular maintenance of filtration systems, and monitoring of water quality. Adhering to manufacturer guidelines, performing regular inspections, and taking proactive measures can help mitigate these issues and ensure the reliable and efficient operation of water-lubricated compressors.

air compressor

How Is Water Quality Crucial for the Performance of These Compressors?

Water quality plays a crucial role in the performance of water-lubricated air compressors. The quality of the water used for lubrication directly impacts the efficiency, reliability, and lifespan of these compressors. Here are the key reasons why water quality is essential for optimal compressor performance:

  1. Lubrication effectiveness: Water serves as the lubricant in water-lubricated air compressors. The water forms a protective film between moving parts, reducing friction and wear. However, if the water contains impurities or contaminants, it can compromise the lubricating properties. Impurities like minerals, sediments, or dissolved solids can hinder the formation of an effective lubricating film, leading to increased friction and potential damage to the compressor components.
  2. Corrosion prevention: Water with high mineral content, such as hard water, can promote corrosion within the compressor system. Minerals like calcium and magnesium can react with metal surfaces, leading to rust, scale formation, and degradation of internal components. Corrosion compromises the structural integrity of the compressor, reduces its efficiency, and may result in costly repairs or even premature failure.
  3. Preventing blockages: Poor water quality can result in the accumulation of sediments, debris, or contaminants within the compressor system. These deposits can block water passages, filters, or valves, impeding the flow of water and affecting the overall performance of the compressor. Restricted water flow may lead to inadequate cooling, reduced lubrication, and compromised efficiency.
  4. Preventing fouling and fouling-related issues: Fouling refers to the accumulation of organic or inorganic deposits on heat transfer surfaces, such as heat exchangers or radiators, within the compressor system. Poor water quality can contribute to fouling, reducing heat transfer efficiency and impairing the cooling capacity of the compressor. This can result in elevated operating temperatures, decreased performance, and potential damage to the compressor.
  5. System cleanliness: Clean water is crucial for maintaining a clean and sanitary compressor system, especially in industries like food and beverage or medical applications. Contaminated water can introduce harmful bacteria, microorganisms, or particles into the compressor, posing a risk to product quality, safety, or patient well-being.

To ensure optimal performance and longevity of water-lubricated air compressors, it is important to monitor and maintain the quality of the water used for lubrication. Regular water analysis, proper filtration, and appropriate water treatment measures should be employed to remove impurities, control mineral content, and maintain the desired water quality. By ensuring clean and high-quality water, the compressor can operate efficiently, minimize the risk of component damage, and contribute to a reliable and safe compressed air system.

China Custom 220V/380V/440V/50Hz/60Hz Dental Oil Free Air Compressor   small air compressor China Custom 220V/380V/440V/50Hz/60Hz Dental Oil Free Air Compressor   small air compressor
editor by CX 2024-05-14

China OEM Hb30 Mini Small Portable Medical Dental Outstanding Quiet Silent Oil Free Air Compressor for Sale portable air compressor

Product Description

Product Description

Features

1. The machine is light, easy to carry.
2. Without refueling in use process, low energy consumption, simple maintenance and low cost.
3. The machine little vibration, low noise
4. Compared with similar machines, the air charging time is faster and the work is reliable.
5. Suitable for food, medical treatment, woodworking decoration, scientific research institutions, and compressed gas as a power source in the field.

 

Product Parameters

Model HB12 HB30 HB35 HB50 HB70A HB90A HB120 HB200
Input power
(KW)
0.68 0.75 0.85 1.5 1.36
(0.68*2)
2.04
(0.68*3)
3.4
(0.85*4)
5.1
(0.85*6)
Voltage (V/Hz) 220/50 220/50 220/50 220/50 220/50 220/50 220/50 220/50
Current (A) 2.8 3.0 3.8 6 6.8 9.0 13 20
Rotate speed (rpm/min) 1400 1400 1400 1400 1400 1400 1400 1400
Air Intake (L/min) 116 128 150 180 256 580 720 950
Exhaust pressure(Mpa) 0.8 0.8 0.8 0.8 0.7 0.7 0.7 0.7
Noise  (db(A)) 66 66 68 71 71 73 85 85
Volume (L) 12 30 35 50 70 90 160 200
Weight (KG) 18 23 26 39 43 69 105 150
Dimensions (CM) 53*23*55 54*30*56 64*32*61 70*30*65 70*35*70 100*35*70 120*41*75 150*45*85

Detailed Photos

Company Profile

Founded in 1997, our factory has become 1 of the most powerful air compressor equipment and engineering drilling equipment manufacturers in China, and is a member of the national compressor industry association, drilling machinery and pneumatic tools industry association, and a drafting unit of national standards. All the products have passed the quality system certification of ISO9001:2000 and national inspection-free products.

 

Its total registered capital of 245 million yuan, holding 10 subsidiaries, is a set of technology research and development,

production and manufacturing, sales and service functions in 1 of the modern machinery and equipment manufacturing enterprises,the enterprise covers an area of 31000m2. The group has more than 1100 employees, including more than 100 middle and senior technical personnel. The group has established close cooperative relations with many domestic famous universities and other scientific research institutes, with strong product research and development capabilities.

 

Now as the main exporter of drilling rigs and air compressors equipment in China. It has exported to more 60 countries such as Southeast Asia, South America, Africa, Eastern Europe, Russia etc. Excellent quality and perfect service gain the consistent praise from customers.

FAQ

Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.

Q2: Warranty terms of your machine?
A2: One year warranty for the machine and technical support according to your needs.

Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.

Q4: What about the voltage of products??Can they be customized?
A4: Yes, of course. The voltage can be customized according to your equirement.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 7-15 days. Other electricity or other color we will delivery within 20-30 days.

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

Q7 Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24 Hours Online Service
Warranty: 1 Year
Lubrication Style: Oil-free
Cooling System: Air Cooling
Structure Type: Open Type
Product Name: Oil Free Air Compress
Customization:
Available

|

air compressor

Are There Specific Water Treatment Requirements for Water-Lubricated Compressors?

Water-lubricated compressors often have specific water treatment requirements to ensure optimal performance, prevent equipment damage, and maintain the desired water quality. Here’s a detailed explanation of the water treatment considerations for water-lubricated compressors:

Water Quality:

  • Purity: The water used for lubrication should be clean and free from impurities, contaminants, or excessive minerals. Impurities in the water can lead to corrosion, blockages, and reduced lubrication effectiveness. Water sources should be evaluated to ensure they meet the required purity standards.
  • Chemical Composition: The chemical composition of the water should be within acceptable limits to avoid any adverse reactions with compressor components or lubricants. Certain water characteristics, such as pH, alkalinity, hardness, and conductivity, need to be monitored and controlled to prevent issues like scaling, fouling, or chemical reactions.

Water Treatment Methods:

  • Filtration: Filtration systems are commonly used to remove particulate matter, sediment, or debris from the water. Filters can range from simple strainers to more advanced filtration systems, depending on the specific water quality requirements and the level of filtration needed.
  • Water Softening: If the water has high levels of hardness minerals, such as calcium and magnesium, water softening methods may be necessary. Water softeners use ion exchange or other processes to remove the hardness minerals, which can help prevent scaling and reduce the risk of deposits in the compressor system.
  • Reverse Osmosis (RO): Reverse osmosis is a water treatment method that uses a semi-permeable membrane to remove dissolved solids, ions, and impurities from the water. RO systems can effectively reduce the total dissolved solids (TDS) and improve the overall water quality, making it suitable for water-lubricated compressors.
  • Chemical Treatment: In some cases, chemical treatments may be required to control water chemistry parameters, such as pH or alkalinity. Chemical additives can be used to adjust or stabilize water chemistry within the desired range, preventing corrosion, scaling, or other issues.

Water treatment requirements for water-lubricated compressors can vary depending on factors such as the compressor design, operating conditions, water source quality, and specific application requirements. It is essential to consult the compressor manufacturer’s recommendations and guidelines regarding water treatment. The manufacturer’s guidelines will provide specific information on water quality limits, treatment methods, and any required maintenance procedures related to water treatment.

Regular monitoring of water quality, including periodic testing and analysis, is recommended to ensure that the water treatment measures are effective and the desired water quality is maintained. Water treatment systems should be properly maintained and periodically serviced to ensure their optimal performance and prevent any potential issues that could affect the operation and longevity of water-lubricated compressors.

air compressor

How Does Water-Lubrication Affect the Lifespan of Air Compressor Components?

Water-lubrication can have both positive and negative effects on the lifespan of air compressor components. Here’s a detailed explanation of how water-lubrication can impact the lifespan of air compressor components:

Positive Effects:

  • Lubrication: Water-lubrication provides effective lubrication to the moving parts of the air compressor, reducing friction and wear. Proper lubrication helps minimize the stress on components such as pistons, cylinders, and bearings, which can contribute to extended component lifespan.
  • Cooling: Water-lubricated systems offer efficient cooling properties. The circulation of water through water jackets or cooling channels helps dissipate heat generated during compression. Effective cooling can prevent excessive temperature rise, reducing the risk of thermal damage and prolonging the lifespan of compressor components.
  • Contaminant Control: Water-lubrication can aid in controlling contaminants within the compressor system. Water acts as a medium to trap and remove particulate matter or debris generated during compressor operation. This helps protect components from potential damage and contributes to their longevity.

Negative Effects:

  • Corrosion: Water-lubrication introduces moisture into the compressor system, which can increase the risk of corrosion. Corrosion can degrade the integrity of components, leading to reduced lifespan and potential failures. Proper corrosion prevention measures, such as using corrosion-resistant materials or implementing water treatment processes, are essential to mitigate this negative effect.
  • Contamination: Although water-lubrication can help control contaminants, it can also introduce impurities and contaminants if the water supply or treatment is not adequately managed. Contaminants such as sediment, minerals, or microbial growth can negatively impact component lifespan by causing blockages, wear, or chemical degradation. Regular maintenance and proper filtration systems are crucial to minimize contamination-related issues.
  • System Complexity: Water-lubricated systems can be more complex than oil-lubricated systems, requiring additional components such as water pumps, filters, and separators. The complexity of the system can introduce more points of failure or maintenance requirements, which, if not addressed properly, can affect the overall lifespan of the compressor components.

Proper maintenance, monitoring, and adherence to manufacturer guidelines are essential to maximize the positive effects and mitigate the negative effects of water-lubrication on air compressor components. Regular inspection, cleaning, lubrication, and water treatment can help ensure optimal operation and prolong the lifespan of the compressor components.

air compressor

How Do Water-Lubricated Air Compressors Compare to Oil-Lubricated Ones?

Water-lubricated air compressors and oil-lubricated air compressors have distinct differences in terms of lubrication method, performance, maintenance, and environmental impact. Here is a detailed comparison between the two:

Water-Lubricated Air Compressors Oil-Lubricated Air Compressors
Lubrication Method Water is used as the lubricant in water-lubricated compressors. It provides lubrication and heat dissipation. Oil is used as the lubricant in oil-lubricated compressors. It provides lubrication, sealing, and heat dissipation.
Performance Water lubrication offers efficient heat dissipation and cooling properties. It can effectively remove heat generated during compressor operation, preventing overheating and prolonging the compressor’s lifespan. Water lubrication can be suitable for applications where high heat generation is a concern. Oil lubrication provides excellent lubrication properties, ensuring smooth operation and reduced friction. It offers good sealing capabilities, preventing air leakage. Oil-lubricated compressors are often preferred for heavy-duty applications that require high pressure and continuous operation.
Maintenance Water lubrication generally requires less maintenance compared to oil lubrication. Water does not leave sticky residues or deposits, simplifying the cleaning process and reducing the frequency of lubricant changes. However, water lubrication may require additional measures to prevent corrosion and ensure proper water quality. Oil lubrication typically requires more maintenance. Regular oil changes, filter replacements, and monitoring of oil levels are necessary. Contaminants, such as dirt or moisture, can adversely affect oil lubrication and require more frequent maintenance tasks.
Environmental Impact Water lubrication is more environmentally friendly compared to oil lubrication. Water is non-toxic, biodegradable, and does not contribute to air or water pollution. It has a lower environmental impact and reduces the risk of contamination in case of leaks or spills. Oil lubrication can have environmental implications. Oil leaks or spills can contaminate the environment, including air, soil, and water sources. Used oil disposal requires proper handling to prevent pollution. Oil-lubricated compressors also release volatile organic compounds (VOCs) into the air, contributing to air pollution.

In summary, water-lubricated air compressors excel in efficient heat dissipation, require less maintenance, and have a lower environmental impact. On the other hand, oil-lubricated air compressors offer excellent lubrication properties and are suitable for heavy-duty applications. The choice between water and oil lubrication depends on specific requirements, operating conditions, and environmental considerations.

China OEM Hb30 Mini Small Portable Medical Dental Outstanding Quiet Silent Oil Free Air Compressor for Sale   portable air compressorChina OEM Hb30 Mini Small Portable Medical Dental Outstanding Quiet Silent Oil Free Air Compressor for Sale   portable air compressor
editor by CX 2024-05-07

China manufacturer High Quality 7bar 5.5kw Industrial Small Quiet Portable Electric Piston Air Compressor Hw7507 lowes air compressor

Product Description

Product Description

1. Patented design, reasonable layout of components, compact structure, large-capacity gas storage tank; advanced surface electrostatic spraying technology.

2. Cast iron crankcase, configure sight oil glasses and fully relieved respirator.
3. The cylinder is made of wear-resistant cast iron material,multi-fin design, ensure the best heat dissipation effect.
4. Connecting rod made of forged aluminum or ductile iron,high strength, don’t easy to deform. The open-type connecting rod is designed with copper bushings at both ends of which are wear-resistant.
5. The high-strength aluminum alloy piston reduces the moment of inertia and improves the stability of the machine body. It adopts 2 oil scraper rings and 2 piston ring designs to ensure low fuel consumption, low backlash and improve compression efficiency.
6. The high-strength wear-resistant crankshaft is equipped with double balance weights and high-precision bearings to ensure the best balance of operation.
7. Adopt high-quality imported reed valve, small air intake resistance, large exhaust volume, and service life will be 10,000
hours.

Product Parameters

Model No HW4007B HW5507 HW7507 HW10007 HW15007 HW20007
Air delivery (m3/min) 0.4 0.55 0.75 1.05 1.55 2.15
Working pressure(Mpa) 0.7 0.7 0.7 0.7 0.7 0.7
Rotation speed(mm) 860 1050 850 850 950 900
Cylinders(mm) 70*3 70*3 100*2 100*3 125*2
110*1
125*2
110*1
Piston stroke(mm) 55 55 72 72 80 110
Tank(L) 120 170 250 320 320 500
Motor power(kw) 3 4 5.5 7.5 11 15
Lubrication Method Splash Splash Splash Splash Splash Splash
Cooling way Air cooled Air cooled Air cooled Air cooled Air cooled Air cooled
Driven method Belt Belt Belt Belt Belt Belt
Weight(KG) 215 225 285 335 487 582
L(mm) 1340 1470 1665 1690 1735 1835
W(mm) 470 470 500 530 585 635
H(mm) 935 980 1090 1260 1350 1460

Detailed Photos

Packaging & Shipping

Certifications

Company Profile

Founded in 1997, our factory has become 1 of the most powerful air compressor equipment and engineering drilling equipment manufacturers in China, and is a member of the national compressor industry association, drilling machinery and pneumatic tools industry association, and a drafting unit of national standards. All the products have passed the quality system certification of ISO9001:2000 and national inspection-free products.
Its total registered capital of 245 million yuan, holding 10 subsidiaries, is a set of technology research and development,
production and manufacturing, sales and service functions in 1 of the modern machinery and equipment manufacturing enterprises, the enterprise covers an area of 31000m2. The group has more than 1100 employees, including more than 100 middle and senior technical personnel. The group has established close cooperative relations with many domestic famous universities and other scientific research institutes, with strong product research and development capabilities.
Now as the main exporter of drilling rigs and air compressors equipment in China. It has exported to more 60 countries such as Southeast Asia, South America, Africa, Eastern Europe, Russia etc. Excellent quality and perfect service gain the consistent praise from customers.

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of air compressor and drilling more than 23 years.

Q2. How do you control quality ?
A:1.Raw- material in checking.
2.Assembly.

3.Worldwid after service available.arrange our engineers to help you training and installation.

Q3. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q4. How long is the delivery time ?
A: For standard voltage ,10working days. Non-standard ,please contact our sales.

Q5. What’s payment term ?
A: T/T, L/C, Western Union etc. Also we could accept USD, RMB, Euro and other currency.

Q6. How about your warranty?
A: One year for the whole machine, except consumable spare parts.

Q7. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.Worldwid agents and after service avaiable.arrange our engineers to help you training and installation.

Q8: What about product package?
A: We will pack the products strictly with standard seaworthy case.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 24 Hours Online Service
Warranty: 1year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Cylinder Arrangement: Duplex Arrangement
Cylinder Position: Vertical

air compressor

Are there special considerations for air compressor installations in remote areas?

Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:

1. Power Source:

Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.

2. Environmental Conditions:

Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.

3. Accessibility and Transport:

Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.

4. Maintenance and Service:

In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.

5. Fuel and Lubricants:

For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.

6. Noise and Environmental Impact:

Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.

7. Communication and Remote Monitoring:

Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.

By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.

air compressor

How do you maintain proper air quality in compressed air systems?

Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:

1. Air Filtration:

Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.

2. Moisture Control:

Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.

3. Oil Removal:

If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.

4. Regular Maintenance:

Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.

5. Air Receiver Tank Maintenance:

Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.

6. Air Quality Testing:

Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.

7. Education and Training:

Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.

8. Documentation and Record-Keeping:

Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.

By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.

air compressor

What is the impact of tank size on air compressor performance?

The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:

1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.

2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.

3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.

4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.

5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.

It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.

Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.

China manufacturer High Quality 7bar 5.5kw Industrial Small Quiet Portable Electric Piston Air Compressor Hw7507   lowes air compressorChina manufacturer High Quality 7bar 5.5kw Industrial Small Quiet Portable Electric Piston Air Compressor Hw7507   lowes air compressor
editor by CX 2024-05-03

China wholesaler CHINAMFG Quality Direct Drive Oil Free Industrial Screw High Pressure Air Compressor small air compressor

Product Description

Product Description

Screw Air Compressor

Screw Air Compressor A Series
Model BD-10A BD-15A BD-20A BD-30A BD-40A BD-50A

Air Volumn(m³/h)

Air Pressure(Mpa)

1.35/0.7 1.8/0.7 2.5/0.7 3.8/0.7 5.2/0.7 6.5/0.7
1.2/0.8 1.6/0.8 2.3/0.8 3.4/0.8 5.0/0.8 6.1/0.8
1.0/1.0 1.3/1.0 2.0/1.0 3.1/1.0 4.3/1.0 5.5/1.0
0.8/1.2 1.0/1.2 1.7/1.2 2.7/1.2 3.8/1.2 4.9/1.2
Ambient Temperature -5~+45ºC
Cooling Way Air Cooling

Discharge Temperature

Ambient Temperature<15ºC
Lubrication – oil 6L 12L 18L 20L 20L 20L
Noise 66±2 68±2
Driving Way Belt Drive Direct Drive
Electricity 380V 3PH 50Hz
Power 7.5KW 11KW 15KW 22KW 30KW 37KW
Starting Method Star-Delta Starting
Dimension L 960mm 1100mm 1100mm 1380mm 1500mm 1500mm
W 580mm 710mm 710mm 850mm 1000mm 1000mm
H 770mm 1100mm 1100mm 1250mm 1350mm 1350mm
Net Weight 178KG 327KG 337KG 500KG 683KG 683KG
Outlet Pipe Diameter 1/2” 1” 1” 5/4” 3/2” 3/2”

 
Direct drive screw air compressor

Connet with rotor, motor and it’s outer case form a unit which can achieve zero maintenance. Besides, due to less spare parts, direct drive has less transmission loss to make it more table and get longer life.

 

Company Profile

PRODUCT SHOWROOM:

MEETING ROOM:

FACTORY VIEW:

TRADE SHOWS:

 

FAQ

 

Q1:Are you Manufacturer or Trading Company?
A:We are a professional manufacturer with our own export department.
Our factory was established in 2000.

Q2:Where is your factory located? How can I visit there? 
A:Our company is located in HangZhou City, China.All clients, from home and abroad,are warmly welcomed to visit us.

Q3. What is your terms of packing?

A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton.

Q4. What is your terms of payment?
A: By T/T, 30% as deposit for production, and 70% balance before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q5. What is your terms of delivery?
A: Normally our quotation is under FOB HangZhou, but we also accept EXW, FOB, CFR, CIF, DDU. 

Q6. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving full payment. If your voltage is different from 380V/3PH/50Hz, the delivery time will be around 20 days for custom-made motors or electric components. 

Q7.Can we customize our product?
A:Yes,you can.Customized material and standard are acceptable. We can provide different standards according to your market and favor.

Q8: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit ;
A2. We respect every customer as our friend and we sincerely do business and make friends with them.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Service
Warranty: 12 Months
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: Diesel Engine
Cylinder Position: Horizontal
Customization:
Available

|

air compressor

What Industries Commonly Use Water-Lubricated Air Compressors?

Water-lubricated air compressors find applications in various industries where specific operating conditions or regulatory requirements make them a preferred choice. Here are some industries that commonly utilize water-lubricated air compressors:

  • Food and Beverage: Water-lubricated compressors are often used in the food and beverage industry due to their ability to provide clean, oil-free compressed air. Compressed air is widely used in food processing and packaging applications, such as pneumatic conveying, product mixing, bottle blowing, and food packaging. Water-lubricated compressors help maintain product purity, prevent oil contamination, and comply with stringent food safety standards.
  • Pharmaceutical and Healthcare: The pharmaceutical and healthcare industries have strict requirements for compressed air quality, especially in applications where compressed air comes into direct contact with pharmaceutical products or is used in critical medical equipment. Water-lubricated compressors offer a viable solution by providing lubrication without the risk of oil contamination. They are commonly used for processes such as air agitation, medical device manufacturing, and laboratory applications.
  • Electronics and Semiconductors: In electronics and semiconductor manufacturing, where sensitive components and cleanroom environments are involved, oil-free compressed air is essential. Water-lubricated compressors can provide the required level of air purity without introducing oil particles or vapors that could contaminate the electronics or semiconductor production processes. They are used in applications such as chip manufacturing, circuit board assembly, and cleanroom air supply.
  • Textile and Garment: Water-lubricated compressors are utilized in the textile and garment industry, where the presence of oil can negatively impact the quality and appearance of fabrics or garments. Compressed air is widely used in textile machinery for tasks such as spinning, weaving, and air jet looms. Water-lubricated compressors ensure oil-free air supply, preventing oil stains or contamination that could affect the final textile or garment products.
  • Environmental and Wastewater Treatment: Water-lubricated compressors are also employed in environmental and wastewater treatment applications. These compressors help supply air for aeration processes in wastewater treatment plants, where air is introduced into the treatment tanks to facilitate the growth of beneficial bacteria for biological treatment. Water-lubricated compressors provide oil-free compressed air, ensuring the purity and effectiveness of the treatment process.

While the industries mentioned above commonly use water-lubricated air compressors, it is important to note that these compressors may also find applications in other sectors where oil-free, contamination-free compressed air is required for specific processes or environmental considerations.

air compressor

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Filtration plays a crucial role in water-lubricated air compressors, serving several important purposes. Here’s a detailed explanation of the role of filtration in water-lubricated air compressors:

Contaminant Removal:

  • Particle Filtration: Filtration systems in water-lubricated air compressors are designed to remove particles and contaminants from the water. These can include sediment, rust, debris, and other solid particles that may be present in the water supply. Removing these contaminants is essential to prevent blockages, clogging, and damage to the compressor components.
  • Oil Removal: In some cases, water used in compressors may contain traces of oil or hydrocarbons. Filtration systems can also help remove oil and hydrocarbon contaminants from the water, ensuring that the lubrication system remains clean and effective.

Protection of Components:

  • Lubrication System: Filtration prevents contaminants from reaching the lubrication system of water-lubricated air compressors. This helps maintain the cleanliness and integrity of the lubricant, ensuring optimal lubrication performance and minimizing wear on the compressor’s moving parts. Clean and filtered water can enhance the efficiency and lifespan of the compressor’s lubrication system.
  • Heat Exchangers and Cooling Systems: Water-lubricated compressors often rely on heat exchangers and cooling systems to regulate the temperature of the compressed air and the compressor itself. Filtration helps protect these components by preventing the accumulation of debris and contaminants that can hinder heat transfer and reduce the cooling efficiency. Clean water free from particles and contaminants promotes effective heat exchange and cooling.

Prevention of System Fouling:

  • Scaling and Deposits: Filtration systems also help prevent scaling and deposits that can occur when water with high mineral content or hardness is used. These deposits can accumulate on the internal surfaces of the compressor, heat exchangers, or other components, reducing their efficiency and potentially causing operational issues. By removing impurities and controlling mineral content, filtration minimizes the risk of scaling and deposits.

Extended Equipment Lifespan:

  • Component Protection: By effectively removing contaminants, filtration systems contribute to the protection and longevity of water-lubricated air compressor components. Clean and filtered water reduces the risk of component wear, corrosion, fouling, and blockages, ultimately extending the lifespan of the compressor and reducing maintenance and replacement costs.

Regular Maintenance and Monitoring:

  • Filter Replacement: Filtration systems require regular maintenance, including the replacement or cleaning of filters. The frequency of filter replacement depends on factors such as water quality, usage conditions, and the specific requirements of the compressor manufacturer. Regular maintenance ensures that the filtration system continues to effectively remove contaminants and protect the compressor components.
  • Monitoring Water Quality: Alongside filtration, monitoring the quality of the water used in water-lubricated compressors is essential. This can involve periodic water analysis, measurement of key parameters such as pH or conductivity, and visual inspections. Monitoring helps identify any changes in water quality or potential issues with the filtration system, allowing for timely maintenance or corrective actions.

In summary, filtration plays a critical role in water-lubricated air compressors by removing contaminants, protecting components, preventing system fouling, and extending equipment lifespan. By maintaining clean and filtered water, filtration systems contribute to the efficient operation, reliability, and longevity of water-lubricated compressors.

air compressor

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Water-lubricated air compressors can be highly suitable for the food and beverage industries due to several reasons:

  1. Food-grade lubrication: Water is a natural and food-grade lubricant. It does not introduce harmful contaminants or chemicals into the production process, ensuring the safety and quality of food and beverage products. Water lubrication eliminates the risk of oil contamination in food products that can occur with oil-lubricated compressors.
  2. Compliance with hygiene standards: The food and beverage industries have strict hygiene standards and regulations. Water-lubricated air compressors align with these standards as water is a clean and sanitary lubricant. It minimizes the risk of cross-contamination and helps maintain a hygienic production environment.
  3. Reduced risk of product contamination: Water lubrication eliminates the possibility of oil carryover or oil vapor entering the compressed air system. This reduces the risk of oil contamination in food and beverage products, ensuring their purity and quality.
  4. Improved product shelf life: Oil-lubricated compressors can release oil aerosols or vapors that may negatively affect the taste, odor, or quality of food and beverage products. Water-lubricated compressors eliminate this concern, contributing to improved product shelf life and maintaining the desired sensory attributes.
  5. Easy cleanup and maintenance: Water lubrication simplifies cleanup and maintenance procedures in food and beverage production facilities. Water does not leave behind sticky residues or require extensive cleaning processes. It facilitates faster and more efficient cleaning, reducing downtime and improving overall productivity.
  6. Environmental friendliness: Water is a sustainable and environmentally friendly lubricant choice. It is non-toxic, biodegradable, and does not contribute to air or water pollution. Using water-lubricated air compressors aligns with the sustainability goals of the food and beverage industries.

Considering these factors, water-lubricated air compressors are well-suited for the food and beverage industries, ensuring compliance with hygiene standards, preventing product contamination, and promoting a safe and sustainable production environment.

China wholesaler CHINAMFG Quality Direct Drive Oil Free Industrial Screw High Pressure Air Compressor   small air compressor China wholesaler CHINAMFG Quality Direct Drive Oil Free Industrial Screw High Pressure Air Compressor   small air compressor
editor by CX 2024-05-03

China best Home Use Rotary Small Scroll Air Compressor Price 2.2kw best air compressor

Product Description

Model WMS-2.2A
Power(kw) 2.2/3.0hp
Air capacity/Working pressure 0.32/8
Air outlet diameter G1/2
Driven method Direct driven
Type Fixed speed
Rated Current 13.6A
Motor Speed 2850rpm
Protection class IP55
Insulation Level F
Way of cooling Air

Home use rotary small scroll air compressor price 2.2kw
Main features of single phase scroll air compressor:
1.Scroll Airend: small size intergrated scroll air end. Low noise, long lifetime. Air end and motor is directly connected through couoling.
2.Intake valve adjusts the compressor Min. Pressure during running and Max. Saving CHINAMFG start-up.
3.LCD control panel, twin air outlet, sound proofed cabinet.
4.Energy conservation, automated fault finding and recording, storage battery included.
This 2.2kw scroll compressor is especially developed for home use. Powered by 1 single phase 2.2kw high quality electric motor which can produce 320L/min air under the pressure of 8 bar.
Adopts air-cooled method and direct start-up method and Equipped with 80L horizontal air tank.
Our compressors have the most options available in factory processing, laboratories, furniture industry and building materials, enterprises, so you can customize your equipment to fit your needs. Packed with WOODEN BOX or FILM WRAPPING.

 

 

ABOUT US                                                                                                                                                                             
Established in 1982, HangZhou Focus Machinery Co., Ltd. is the explorer and by far the biggest professional construction machinery manufacturer in HangZhou, China. 

We mainly manufacture concrete batching plant, mobile concrete mixing plant, twin-shaft concrete mixer, small rotary concrete mixer, compulsory asphalt mixing plant, asphalt drum mixing plant, mobile asphalt plant, trailer concrete pump, concrete pump with mixer, dry CHINAMFG mixing plant, truck mounted concrete pump, concrete truck mixer, tower crane, construction hoist, cement bag splitter and pneumatic conveyor, SCREW AIR COMPRESSOR etc.

FOCUS_BUILT A BETTER WORLD
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Overseas Service Center with Sufficient Engineers
Warranty: 12 Months
Installation Type: Stationary Type
Lubrication Style: Oil-free
Cylinder Position: Horizontal
Outlet Diameter: G1/2

air compressor

Can air compressors be used for shipbuilding and maritime applications?

Air compressors are widely used in shipbuilding and maritime applications for a variety of tasks and operations. The maritime industry relies on compressed air for numerous essential functions. Here’s an overview of how air compressors are employed in shipbuilding and maritime applications:

1. Pneumatic Tools and Equipment:

Air compressors are extensively used to power pneumatic tools and equipment in shipbuilding and maritime operations. Pneumatic tools such as impact wrenches, drills, grinders, sanders, and chipping hammers require compressed air to function. The versatility and power provided by compressed air make it an ideal energy source for heavy-duty tasks, maintenance, and construction activities in shipyards and onboard vessels.

2. Painting and Surface Preparation:

Air compressors play a crucial role in painting and surface preparation during shipbuilding and maintenance. Compressed air is used to power air spray guns, sandblasting equipment, and other surface preparation tools. Compressed air provides the force necessary for efficient and uniform application of paints, coatings, and protective finishes, ensuring the durability and aesthetics of ship surfaces.

3. Pneumatic Actuation and Controls:

Air compressors are employed in pneumatic actuation and control systems onboard ships. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control propulsion systems, and manage various shipboard processes. Pneumatic control systems offer reliability and safety advantages in maritime applications.

4. Air Start Systems:

In large marine engines, air compressors are used in air start systems. Compressed air is utilized to initiate the combustion process in the engine cylinders. The compressed air is injected into the cylinders to turn the engine’s crankshaft, enabling the ignition of fuel and starting the engine. Air start systems are commonly found in ship propulsion systems and power generation plants onboard vessels.

5. Pneumatic Conveying and Material Handling:

In shipbuilding and maritime operations, compressed air is used for pneumatic conveying and material handling. Compressed air is utilized to transport bulk materials, such as cement, sand, and grain, through pipelines or hoses. Pneumatic conveying systems enable efficient and controlled transfer of materials, facilitating construction, cargo loading, and unloading processes.

6. Air Conditioning and Ventilation:

Air compressors are involved in air conditioning and ventilation systems onboard ships. Compressed air powers air conditioning units, ventilation fans, and blowers, ensuring proper air circulation, cooling, and temperature control in various ship compartments, cabins, and machinery spaces. Compressed air-driven systems contribute to the comfort, safety, and operational efficiency of maritime environments.

These are just a few examples of how air compressors are utilized in shipbuilding and maritime applications. Compressed air’s versatility, reliability, and convenience make it an indispensable energy source for various tasks and systems in the maritime industry.

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

Can air compressors be used for automotive applications?

Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:

1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.

2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.

3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.

4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.

5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.

6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.

7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.

When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.

Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.

China best Home Use Rotary Small Scroll Air Compressor Price 2.2kw   best air compressorChina best Home Use Rotary Small Scroll Air Compressor Price 2.2kw   best air compressor
editor by CX 2024-04-30

China Standard 100HP 13m3/Min Industrial Dry Electric Direct Driven (no oil) Oil-Free Silent Oxygen Screw Air Compressor for Medical small air compressor

Product Description

Product Description

Product Introduction

  The power frequency screw air compressor adopts the leading screw host in the industry, with high efficiency and low speed, and the rotor adopts the third generation tooth profile and the world’s leading excellent profile design; it has the characteristics of mute, energy saving, stability, high reliability and long service life.
  It adopts special motor for low speed screw air compressor with high stability. It is 3-5% more efficient than similar products.
The direct connection structure has no transmission loss, 100% transmission efficiency, low maintenance cost, convenient disassembly, and greatly saves downtime.
  The coaxial integrated structure does not have any transmission loss, reduces vulnerable parts, and the transmission efficiency is 100%.

Detailed Photos

Product Parameters

Working pressure(bar) 7
Capacity(m3/min) 13
Power(Kw) 75
Noise(dB) 70±3
Pipe Diameter DN50
Weight(Kg) 2900
Dimension(mm) 2200×1400×2000mm

Certifications

Packaging & Shipping

Installation Instructions

Company Profile

ZheJiang Kingair Industrial Co., Ltd., is the core technology solution provider for compressed gas system solutions, with mature operation experience and excellent brand reputation in the 3 major areas : product system, core technology and solutions.
   
    The company has strong comprehensive strength, the factory is located in Xihu (West Lake) Dis., ZheJiang , covers an area of 30000 square meters, has a strong equipment production capacity. In the course of 20 years of operation and development, we have always adhered to the enterprise spirit of
“professionalism, innovation, energy saving and service”, deeply implemented the strategic policy of environmental protection and low carbon, and realized the construction of high intelligent and efficient air pressure system industry chain.
   
    Kingair focuses on R&D, production and trade, and produces air compressor products with stable overall performance, advanced control system, superior, gas environment, reasonable design, higher efficiency and longer service life.
   
    Each product of the company has passed the IS09000 quality management system certification, European CE, ISO certification, etc., and has established a complete set of mature foreign trade operation system. The products are popular in more than 80 countries and regions in Asia, Europe,Africa and America.

 

FAQ

Q1. Is KINGAIR trading company or manufacturer ?
A: We are professional manufacturer of screw air compressor, more than 20 years experience.

Q2. How long is KINGAIR delivery time ?
A: KINGAIR standard delivery time is 15 working days after confirmed order.For the other non-standard requirements will be discussed case by case.

Q3. How about your after-sales service?
A: 1. Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3. CHINAMFG agents and after service available arrange our engineers to help you training and installation.

Q4. What is the available voltage KINGAIR compressor?
A:KINGAIR available voltage include 380v/50hz/3p,400v/50hz/3p,415v/50hz/3p,220v/60hz/3p,440v/60hz/3p,And
KIGNAIR also supplies the required voltage.

Q5. Do you have any certificate ?
A: Yes, according to customer’s market need, we can offer CE certificate, ISO certificate, etc.

Q6. Do you offer OEM service ?
A: Yes, both OEM & ODM service can be accepted.

Q7. Can KINGAIR machines be run in high temperature environment?What is working temperature range?
A: Yes, KINGAIR machines would run in high temperature environment countries.Such as India, UAE,South Africa, Saudi Arabia, Iraq, Pakistan,etc. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: on Line Technical Support
Warranty: 1 Year
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Samples:
US$ 30000/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What Are the Key Components of a Water-Lubrication System in Compressors?

A water-lubrication system in compressors typically consists of several key components that work together to provide lubrication and cooling to the compressor. Here’s a detailed explanation of the key components of a water-lubrication system in compressors:

Water Supply:

  • Water Source: The water-lubrication system requires a water source that provides clean and suitable water for lubrication. The water can be sourced from various places such as municipal water supply, well water, or treated water from a dedicated water treatment system.
  • Water Inlet: The water inlet is the entry point where water enters the compressor’s lubrication system. It may include valves, filters, or other components to regulate and control the water flow.

Lubrication System:

  • Water Jackets: Water jackets are channels or passages built into the compressor’s housing or cylinder walls. These jackets allow water to circulate and come into direct contact with the compressor’s moving parts, providing lubrication and cooling. The water jackets help dissipate heat generated during compression and prevent excessive temperatures that could damage the compressor.
  • Water Pump: The water pump is responsible for circulating water through the water jackets and the entire lubrication system. It provides the necessary pressure to ensure adequate water flow and distribution to the compressor’s components.
  • Flow Control Devices: Flow control devices, such as valves or flow restrictors, are often included in the water-lubrication system to regulate and control the water flow rate. These devices help maintain optimal water pressure and flow throughout the system, ensuring effective lubrication and cooling.
  • Water Filters: Water filters are used to remove impurities, sediment, or debris from the water before it enters the lubrication system. They help prevent blockages, protect the compressor’s components from damage, and maintain the quality of the water used for lubrication.
  • Water Separator: A water separator is a component that removes excess water, moisture, or condensate from the compressed air. It ensures that the compressed air leaving the compressor is dry and free from excess water content, preventing potential issues such as corrosion or contamination downstream.

Control and Monitoring:

  • Temperature Sensors: Temperature sensors are used to monitor the temperature of the water and the compressor components. They provide feedback to the control system, allowing for adjustments in water flow or cooling measures if required to maintain optimal operating conditions.
  • Pressure Sensors: Pressure sensors are employed to monitor the water pressure within the lubrication system. They help ensure that the water flow and pressure are within the desired range, allowing for proper lubrication and cooling of the compressor.
  • Control System: A control system, which may include a combination of sensors, valves, and controllers, is responsible for regulating and maintaining the operation of the water-lubrication system. It can monitor various parameters, such as temperature, pressure, and flow, and make adjustments as needed to ensure efficient and safe operation.

Regular maintenance, inspection, and monitoring of the key components of the water-lubrication system are essential to ensure its proper functioning and to prevent any issues that could affect the performance and longevity of the compressor.

air compressor

What Are the Considerations for Choosing Water-Lubricated vs. Oil-Lubricated Compressors?

When selecting between water-lubricated and oil-lubricated compressors, several considerations come into play. Here’s a detailed explanation of the key factors to consider when choosing between these two types:

Operating Environment:

  • Water Sensitivity: Water-lubricated compressors are well-suited for environments where water is readily available and can be easily supplied to the compressor system. On the other hand, oil-lubricated compressors are more suitable for applications where water is not readily available or where water contamination could pose a problem.
  • Cleanliness Requirements: If the application demands a high level of cleanliness, such as in certain manufacturing processes or cleanroom environments, water-lubricated compressors may be preferred. Water is inherently cleaner than oil and reduces the risk of oil contamination in sensitive operations.

Maintenance and Service:

  • Lubricant Replacement: Oil-lubricated compressors require regular oil changes and maintenance to ensure proper lubrication and performance. Water-lubricated compressors, on the other hand, eliminate the need for oil changes and associated maintenance tasks, simplifying the maintenance requirements.
  • Oil Contamination: Oil-lubricated compressors carry the risk of oil contamination in the compressed air system. This can be a concern in certain applications where oil contamination can negatively impact product quality or downstream equipment. Water-lubricated compressors reduce the risk of oil contamination, making them advantageous in such applications.

Environmental Impact:

  • Oil Disposal: Oil-lubricated compressors generate used oil that requires proper disposal in accordance with environmental regulations. Water-lubricated compressors eliminate the need for oil disposal, contributing to a reduced environmental impact.
  • Energy Efficiency: In terms of energy efficiency, water-lubricated compressors tend to have an advantage. Water has a higher specific heat capacity than oil, meaning it can absorb and dissipate heat more effectively. This can result in improved cooling efficiency and potentially lower energy consumption compared to oil-lubricated compressors.

Application-Specific Factors:

  • Operating Pressure: Water-lubricated compressors are generally suitable for lower to moderate operating pressures. Oil-lubricated compressors, on the other hand, can handle higher operating pressures, making them more appropriate for applications that require higher pressure levels.
  • Temperature Sensitivity: Water-lubricated compressors may have limitations in applications where low temperatures are encountered. Water freezing or becoming slushy can cause operational issues. Oil-lubricated compressors, with appropriate low-temperature oil formulations, can better handle such temperature-sensitive conditions.

Cost Considerations:

  • Initial Cost: Water-lubricated compressors generally have a lower initial cost compared to oil-lubricated compressors. This cost advantage can be attractive for applications with budget constraints.
  • Maintenance Cost: Over the long term, water-lubricated compressors may have lower maintenance costs due to the elimination of oil changes and associated maintenance tasks. However, it’s important to consider the specific maintenance requirements and costs associated with each type of compressor.

By considering these factors, including the operating environment, maintenance and service requirements, environmental impact, application-specific factors, and cost considerations, one can make an informed decision when choosing between water-lubricated and oil-lubricated compressors.

air compressor

What is a water lubrication air compressor?

A water lubrication air compressor, also known as a water-injected air compressor, is a type of compressor that utilizes water as a lubricant and cooling medium in its operation. Unlike traditional air compressors that rely on oil for lubrication, water lubrication air compressors offer specific advantages and are commonly used in certain applications. Here’s an overview of how water lubrication air compressors work and their key characteristics:

Working Principle:

In a water lubrication air compressor, the compression process involves injecting a controlled amount of water into the compression chamber. The water acts as a lubricant and cooling agent, ensuring smooth operation and preventing excessive heat buildup. As the air is compressed, the water lubricates the internal components, reducing friction and wear.

Advantages:

1. Reduced Environmental Impact: One of the significant advantages of water lubrication air compressors is their reduced environmental impact. These compressors eliminate the need for oil lubrication, resulting in lower oil consumption and the elimination of oil-related contamination risks. This makes them a more environmentally friendly option, particularly in applications where oil contamination must be avoided, such as in food processing or pharmaceutical industries.

2. Enhanced Air Quality: Water lubrication air compressors produce cleaner compressed air compared to oil-lubricated compressors. The absence of oil in the compression process eliminates the risk of oil carryover into the air system. This is essential in applications where clean and oil-free compressed air is required, such as in electronics manufacturing or spray painting.

3. Improved Energy Efficiency: Water lubrication air compressors can offer improved energy efficiency compared to oil-lubricated compressors. The water injected during the compression process helps in cooling the air, reducing the energy required for subsequent cooling and drying processes. This can lead to energy savings and lower operating costs.

4. Lower Maintenance Requirements: Water lubrication air compressors generally have lower maintenance requirements compared to oil-lubricated compressors. The absence of oil means no oil changes or oil filter replacements, simplifying maintenance tasks and reducing costs. However, regular checks and maintenance of the water filtration system are necessary to ensure the water quality and prevent any potential contamination issues.

Applications:

Water lubrication air compressors are commonly used in applications where clean and oil-free compressed air is critical. Some typical applications include:

  • Food and beverage processing
  • Pharmaceutical manufacturing
  • Electronics manufacturing
  • Spray painting and coating
  • Laboratories and research facilities
  • Dental offices

These compressors provide a reliable and environmentally friendly solution for industries and applications that require high-quality compressed air without oil contamination.

China Standard 100HP 13m3/Min Industrial Dry Electric Direct Driven (no oil) Oil-Free Silent Oxygen Screw Air Compressor for Medical   small air compressor China Standard 100HP 13m3/Min Industrial Dry Electric Direct Driven (no oil) Oil-Free Silent Oxygen Screw Air Compressor for Medical   small air compressor
editor by CX 2024-04-27