Tag Archives: 8 bar air compressor

China supplier 90 Kw 8 Bar AC Direct Rotary Screw Air Compressor air compressor for sale

Product Description

0.5-80 M3/Min 6-40 Bar 5.5-400 Kw Electrical Stationary Industrial AC Power Direct Driven/Coupled Rotary Screw Air Compressors Advantages

1.DENAIR Enhanced energy saving screw air compressor reached the super energy saving level

2.Energy Efficient Index 1(EEI 1) approved according to GB19153-2009, the energy consumption is 10%~15% lower than EEI 2.

3.CHINAMFG air compressor design with 72 types of technology patent, real bigger air flow

4.State-of-the-art screw element, original Germany CHINAMFG air end, ladvanced SAP profile design, superior Sweden CHINAMFG element bearings

5.CHINAMFG air compressdor dopts world-renowned components, such as Schneider electronics from France, DENAIR filters from Germany, Danfoss pressure sensor from Denmark, etc. contribute to guarantee the compressor longer service life.

6.Smart touch screen design and 0 pressure drop design

7.Higher efficiency cooling system and electrical motor

8.Stainless steel pipes, reasonable inner design, ensure long service life without maintenance.

Technical Parameters Of Energy Saving Rotary Screw Air Compressor

Model	Maxinmum working		Capacity(FAD)*				Installed motor power		Driving mode&	Noise	Dimensions(mm)			Weight	Air outlet
	pressure		50 HZ		60 HZ		Installed motor power		Cooling method	level**	Dimensions(mm)			Weight	pipe diameter
	bar(g)	psig	m3/min	cfm	m3/min	cfm	kw	hp		dB(A)	L	W	H	kg
DA-5	7.5	109	0.80	28	0.80	28	5.5	7.5	Belt Driven	75	900	600	860	315	G3/4″
DA-5	8.5	123	0.78	28	0.78	28	5.5	7.5	Air Cooling	75	900	600	860	315	G3/4″
DA-7	7.5	109	1.09	39	1.09	39	7.5	10		75	900	600	860	315	G3/4″
	8.5	123	1.07	38	1.07	38	7.5	10		75	900	600	860
	10.5	152	0.92	32	0.91	32	7.5	10		75	900	600	860
	13.0	189	0.73	26	0.72	26	7.5	10		75	900	600	860
DA-11	7.5	109	1.66	59	1.66	59	11	15		75	1230	650	900	324	G3/4″
	8.5	123	1.64	58	1.64	58	11	15		75	1230	650	900
	10.5	152	1.45	51	1.45	51	11	15		75	1230	650	900
	13.0	189	1.13	40	1.12	40	11	15		75	1230	650	900
DA-15	7.5	109	2.54	90	2.53	89	15	20	Direct Driven	75	1465	990	1345	453	G1-1/4″
	8.5	123	2.51	88	2.50	88	15	20	Air Cooling	75	1465	990	1345
	10.5	152	1.97	70	1.86	66	15	20		75	1465	990	1345
	13.0	189	1.91	67	1.83	65	15	20		75	1465	990	1345
DA-18	7.5	109	3.04	107	3.65	129	18.5	25		75	1465	990	1345	453	G1-1/4″
	8.5	123	3.03	107	3.63	128	18.5	25		75	1465	990	1345
	10.5	152	3.00	106	2.38	84	18.5	25		75	1465	990	1345
	13.0	189	1.91	67	2.36	83	18.5	25		75	1465	990	1345
DA-22	7.5	109	3.57	126	3.65	129	22	30		75	1465	990	1345	477	G1-1/4″
	8.5	123	3.55	125	3.63	128	22	30		75	1465	990	1345
	10.5	152	3.00	106	2.38	84	22	30		75	1465	990	1345
	13.0	189	2.97	105	2.36	83	22	30		75	1465	990	1345
DA-30	7.5	109	5.28	187	4.49	159	30	40		85	1600	1250	1550	682	G1-1/2″
	8.5	123	5.26	186	4.48	158	30	40		85	1600	1250	1550
	10.5	152	5.21	184	4.47	158	30	40		85	1600	1250	1550
	13.0	189	3.45	122	3.58	126	30	40		85	1600	1250	1550
DA-37	7.5	109	6.54	231	6.33	224	37	50		85	1600	1250	1550	728	G1-1/2″
	8.5	123	6.52	230	6.30	222	37	50		85	1600	1250	1550
	10.5	152	5.21	184	4.47	158	37	50		85	1600	1250	1550
	13.0	189	5.16	182	4.43	156	37	50		85	1600	1250	1550
DA-45	7.5	109	7.67	271	7.79	275	45	60		85	1600	1250	1550	728	G1-1/2″
	8.5	123	7.62	269	7.76	574	45	60		85	1600	1250	1550
	10.5	152	6.46	228	6.24	220	45	60		85	1600	1250	1550
	13.0	189	6.41	226	4.44	157	45	60		85	1600	1250	1550
DA-55	7.5	109	9.76	345	9.14	323	55	75		85	1876	1326	1700	1310	G2″
	8.5	123	9.67	342	9.06	320	55	75		85	1876	1326	1700
	10.5	152	7.53	266	7.74	273	55	75		85	1876	1326	1700
	13.0	189	7.40	261	6.30	222	55	75		85	1876	1326	1700
DA-75	7.5	109	14.21	502	11.72	414	75	100		85	1876	1326	1700	1325	G2″
	8.5	123	12.55	443	11.63	411	75	100		85	1876	1326	1700
	10.5	152	9.51	336	11.43	404	75	100		85	1876	1326	1700
	13.0	189	9.23	326	8.75	309	75	100		85	1876	1326	1700
DA-90(W)	7.5	109	16.62	587	17.01	601	90	120	Direct Driven	72	2450	1800	1700	2450	DN80
	8.5	123	16.37	578	16.82	594	90	120	Air Cooling Or	72	2450	1800	1700
	10.5	152	14.21	502	14.87	525	90	120	Water Cooling	72	2450	1800	1700
	13.0	189	11.77	416	11.27	398	90	120		72	2450	1800	1700
DA-110(W)	7.5	109	20.13	711	19.10	674	110	150		72	2450	1800	1700	2500	DN80
	8.5	123	20.05	708	19.06	673	110	150		72	2450	1800	1700
	10.5	152	16.33	576	17.01	601	110	150		72	2450	1800	1700
	13.0	189	14.11	498	14.68	518	110	150		72	2450	1800	1700
DA-132(W)	7.5	109	22.85	807	24.37	861	132	175		72	2450	1800	1700	2600	DN80
	8.5	123	22.73	802	24.23	856	132	175		72	2450	1800	1700
	10.5	152	19.88	702	18.95	669	132	175		72	2450	1800	1700
	13.0	189	16.51	583	16.82	594	132	175		72	2450	1800	1700
DA-160(W)	7.5	109	26.92	950	27.90	985	160	215		78	2650	1700	1850	3200	DN80
	8.5	123	26.86	949	27.76	980	160	215		78	2650	1700	1850
	10.5	152	22.44	792	23.97	846	160	215		78	2650	1700	1850
	13.0	189	19.63	693	18.82	664	160	215		78	2650	1700	1850
DA-185(W)	7.5	109	28.89	1571	30.53	1078	185	250		78	2650	1700	1850	3300	DN80
	8.5	123	28.84	1018	30.44	1075	185	250		78	2650	1700	1850
	10.5	152	25.11	886	27.46	970	185	250		78	2650	1700	1850
	13.0	189	22.08	780	23.69	836	185	250		78	2650	1700	1850
DA-200(W)	7.5	109	31.88	1126	30.53	1078	200	270		80	3000	1950	2030	4750	DN100
	8.5	123	31.82	1124	30.44	1075	200	270		80	3000	1950	2030
	10.5	152	28.48	1006	30.22	1067	200	270		80	3000	1950	2030
	13.0	189	25.00	883	27.07	956	200	270		80	3000	1950	2030
DA-220(W)	7.5	109	36.20	1278	37.22	1314	220	300		80	3000	1950	2030	4800	DN100
	8.5	123	36.15	1276	37.17	1312	220	300		80	3000	1950	2030
	10.5	152	31.71	1120	33.25	1174	220	300		80	3000	1950	2030
	13.0	189	28.48	1006	27.07	956	220	300		80	3000	1950	2030
DA-250(W)	7.5	109	43.31	1529	42.87	1514	250	350		80	3000	1950	2030	4850	DN100
	8.5	123	43.24	1527	41.30	1458	250	350		80	3000	1950	2030
	10.5	152	36.03	1272	37.04	1308	250	350		80	3000	1950	2030
	13.0	189	31.55	1114	33.15	1170	250	350		80	3000	1950	2030
DA-280(W)	7.5	109	46.59	1645	47.16	1665	280	375		85	3700	2300	2450	5200	DN125
	8.5	123	46.53	1643	45.64	1612	280	375		85	3700	2300	2450
	10.5	152	42.95	1516	42.56	1503	280	375		85	3700	2300	2450
	13.0	189	35.89	1267	36.95	1305	280	375		85	3700	2300	2450
DA-315(W)	7.5	109	53.16	1877	50.88	1797	315	425		85	3700	2300	2450	6000	DN125
	8.5	123	52.63	1858	50.83	1795	315	425		85	3700	2300	2450
	10.5	152	43.05	1520	46.27	1634	315	425		85	3700	2300	2450
	13.0	189	42.93	1516	40.32	1424	315	425		85	3700	2300	2450
DA-355(W)	7.5	109	63.37	2238	58.12	2052	355	475		85	4500	2500	2450	7000	DN125
	8.5	123	63.16	2230	56.54	1997	355	475		85	4500	2500	2450
	10.5	152	52.63	1858	51.57	1821	355	475		85	4500	2500	2450
	13.0	189	43.79	1546	45.35	1601	355	475		85	4500	2500	2450
DA-400(W)	7.5	109	70.99	2507	61.72	2179	400	550		85	4500	2500	2450	8000	DN125
	8.5	123	70.64	2494	59.72	2109	400	550		85	4500	2500	2450
	10.5	152	52.63	1858	56.52	1996	400	550		85	4500	2500	2450
	13.0	189	46.34	1636	51.35	1813	400	550		85	4500	2500	2450

*) FAD in accordance with ISO 1217 : 2009, Annex C: Absolute intake pressure 1 bar (a), cooling and air intake temperature 20 °C
**) Noise level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance: ± 3 dB(A)
***) EEI 1- Energy Effiency Index 1, which refers to enhanced energy saving series
Specifications are subject to change without notice.

DENAIR Factory & Product Lines

DENAIR Exhibition

We carefully selected for you the classic case

Enhanced Energy Saving Air Compressor in Oman

Project Name: Sandblasting in Muscat, Oman.

Product Name: 75KW 100HP Enhanced Energy Saving screw air compressor EEI 1 (Energy Efficiency Index 1) with air dryer, air receiver tank and air filters.

Model No. & Qty: DA-75+ x 1.

Working Time: From June, 2016 till now

Event: In June, 2015, 1 set of CHINAMFG enhanced energy saving air compressor system was installed in Muscat Oman. This is the first project finished by CHINAMFG distributor in Oman. Our partner Mr. Hari shared the photos at working site to us as a good starting. That means more and more CHINAMFG energy saving solutions will contribute to the industries in Oman in the near future. CHINAMFG air compressor factory and air compressor distributor will try the best to provide top quality products, cost effective solution and excellent service for local users in Oman. In order to ensure the most professional service, the distributor plans to send 2 service engineers to CHINAMFG factory in ZheJiang for training and learnin. We will update the news at that time.

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2:No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China
.
Q3: Warranty terms of your air compressor machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the air compressor?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

How are air compressors utilized in pharmaceutical manufacturing?

Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:

1. Manufacturing Processes:

Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.

2. Instrumentation and Control Systems:

Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.

3. Packaging and Filling:

Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.

4. Cleanroom Environments:

Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.

5. Laboratory Applications:

In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.

6. HVAC Systems:

Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.

By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.

air compressor

Can air compressors be used for inflating tires and sporting equipment?

Yes, air compressors can be used for inflating tires and sporting equipment, providing a convenient and efficient method for achieving the desired air pressure. Here’s how air compressors are used for these purposes:

1. Tire Inflation:

Air compressors are commonly used for inflating vehicle tires, including car tires, motorcycle tires, bicycle tires, and even larger truck or trailer tires. Air compressors provide a continuous source of pressurized air, allowing for quick and accurate inflation. They are often used in automotive repair shops, gas stations, and by individuals who regularly need to inflate tires.

2. Sporting Equipment Inflation:

Air compressors are also useful for inflating various types of sporting equipment. This includes inflatable balls such as soccer balls, basketballs, footballs, and volleyballs. Additionally, air compressors can be used to inflate inflatable water toys, air mattresses, inflatable kayaks, and other recreational items that require air for proper inflation.

3. Air Tools for Inflation:

Air compressors can power air tools specifically designed for inflation purposes. These tools, known as inflators or air blow guns, provide controlled airflow for inflating tires and sporting equipment. They often have built-in pressure gauges and nozzles designed to fit different types of valves, making them versatile and suitable for various inflation tasks.

4. Adjustable Pressure:

One advantage of using air compressors for inflation is the ability to adjust the pressure. Most air compressors allow users to set the desired pressure level using a pressure regulator or control knob. This feature ensures that tires and sporting equipment are inflated to the recommended pressure, promoting optimal performance and safety.

5. Efficiency and Speed:

Air compressors provide a faster and more efficient inflation method compared to manual pumps. The continuous supply of compressed air allows for quick inflation, reducing the time and effort required to inflate tires and sporting equipment manually.

6. Portable Air Compressors:

For inflating tires and sporting equipment on the go, portable air compressors are available. These compact and lightweight compressors can be easily carried in vehicles or taken to sports events and outdoor activities, ensuring convenient access to a reliable air supply.

It is important to note that when using air compressors for inflating tires, it is recommended to follow manufacturer guidelines and proper inflation techniques to ensure safety and avoid overinflation.

air compressor

What is the purpose of an air compressor?

An air compressor serves the purpose of converting power, typically from an electric motor or an engine, into potential energy stored in compressed air. It achieves this by compressing and pressurizing air, which can then be used for various applications. Here’s a detailed explanation of the purpose of an air compressor:

1. Powering Pneumatic Tools: One of the primary uses of an air compressor is to power pneumatic tools. Compressed air can be used to operate a wide range of tools, such as impact wrenches, nail guns, paint sprayers, sanders, and drills. The compressed air provides the necessary force and energy to drive these tools, making them efficient and versatile.

2. Supplying Clean and Dry Air: Air compressors are often used to supply clean and dry compressed air for various industrial processes. Many manufacturing and production operations require a reliable source of compressed air that is free from moisture, oil, and other contaminants. Air compressors equipped with appropriate filters and dryers can deliver high-quality compressed air for applications such as instrumentation, control systems, and pneumatic machinery.

3. Inflating Tires and Sports Equipment: Air compressors are commonly used for inflating tires, whether it’s for vehicles, bicycles, or sports equipment. They provide a convenient and efficient method for quickly filling tires with the required pressure. Air compressors are also used for inflating sports balls, inflatable toys, and other similar items.

4. Operating HVAC Systems: Air compressors play a crucial role in the operation of heating, ventilation, and air conditioning (HVAC) systems. They provide compressed air for controlling and actuating dampers, valves, and actuators in HVAC systems, enabling precise regulation of air flow and temperature.

5. Assisting in Industrial Processes: Compressed air is utilized in various industrial processes. It can be used for air blow-off applications, cleaning and drying parts, powering air-operated machinery, and controlling pneumatic systems. Air compressors provide a reliable and efficient source of compressed air that can be tailored to meet the specific requirements of different industrial applications.

6. Supporting Scuba Diving and Breathing Systems: In scuba diving and other breathing systems, air compressors are responsible for filling diving tanks and supplying breathable air to divers. These compressors are designed to meet strict safety standards and deliver compressed air that is free from contaminants.

Overall, the purpose of an air compressor is to provide a versatile source of compressed air for powering tools, supplying clean air for various applications, inflating tires and sports equipment, supporting industrial processes, and facilitating breathing systems in specific contexts.

China supplier 90 Kw 8 Bar AC Direct Rotary Screw Air Compressor air compressor for sale
editor by CX 2024-05-17

China Custom Industrial Stationary Similar CHINAMFG Rand CHINAMFG 7 8 10 Bar 55kw Medical Oil Free Electric Direct Driven Pm VSD Rotary Screw Type Air Compressor mini air compressor

Product Description

Product Introduction

The Airend of Kingair water lubricated Oil-free CHINAMFG adopts PEEK door rotor, aerospace grade stainless steel rotor and a new production process. Using nano-scale water filter core and Inlet reverse osmosis system, it can provide a stable and qualified lubricating water treatment system for the compressor. The oil-free machine system can change water without stopping according to the set water change cycle, reducing daily maintenance costs and making use more worry-free. The system is simple, reduces parts and failure points, and improves reliability. Low energy consumption, isothermal compression, higher volumetric efficiency, more than 15% energy saving than two-stage compression dry oil-free screw compressor.

Detailed Photos

Product Parameters

Model	KAW-55A
Power(Kw)	55Kw
Pressure(Bar)	10Bar
Volume flow(m3/min)	8.55m3/min
Air Outlet	1 1/2”
Weight(kg)	1470Kg
Dimension(mm)	1980×1300×1750mm

Certifications

Packaging & Shipping

Installation Instructions

Company Profile

ZheJiang Kingair Industrial Co., Ltd., is the core technology solution provider for compressed gas system solutions, with mature operation experience and excellent brand reputation in the 3 major areas : product system, core technology and solutions.

The company has strong comprehensive strength, the factory is located in Xihu (West Lake) Dis., ZheJiang , covers an area of 30000 square meters, has a strong equipment production capacity. In the course of 20 years of operation and development, we have always adhered to the enterprise spirit of
“professionalism, innovation, energy saving and service”, deeply implemented the strategic policy of environmental protection and low carbon, and realized the construction of high intelligent and efficient air pressure system industry chain.

Kingair focuses on R&D, production and trade, and produces air compressor products with stable overall performance, advanced control system, superior, gas environment, reasonable design, higher efficiency and longer service life.

Each product of the company has passed the IS09000 quality management system certification, European CE, ISO certification, etc., and has established a complete set of mature foreign trade operation system. The products are popular in more than 80 countries and regions in Asia, Europe,Africa and America.

FAQ

Q1. Is KINGAIR trading company or manufacturer ?
A: We are professional manufacturer of screw air compressor, more than 20 years experience.

Q2. How long is KINGAIR delivery time ?
A: KINGAIR standard delivery time is 15 working days after confirmed order.For the other non-standard requirements will be discussed case by case.

Q3. How about your after-sales service?
A: 1. Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3. CHINAMFG agents and after service available arrange our engineers to help you training and installation.

Q4. What is the available voltage KINGAIR compressor?
A:KINGAIR available voltage include 380v/50hz/3p,400v/50hz/3p,415v/50hz/3p,220v/60hz/3p,440v/60hz/3p,And
KIGNAIR also supplies the required voltage.

Q5. Do you have any certificate ?
A: Yes, according to customer’s market need, we can offer CE certificate, ISO certificate, etc.

Q6. Do you offer OEM service ?
A: Yes, both OEM & ODM service can be accepted.

Q7. Can KINGAIR machines be run in high temperature environment?What is working temperature range?
A: Yes, KINGAIR machines would run in high temperature environment countries.Such as India, UAE,South Africa, Saudi Arabia, Iraq, Pakistan,etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	on Line Technical Support
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Water Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal

Samples:	US$ 22200/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

How Do You Ensure Proper Water Lubrication in Air Compressors?

Proper water lubrication in air compressors is essential for maintaining their performance, efficiency, and longevity. Here’s a detailed explanation of how to ensure proper water lubrication:

Use High-Quality Water: Start by using high-quality water for lubrication. Ideally, the water should be clean, free from impurities, and have the appropriate chemical composition. Impurities or contaminants in the water can lead to increased wear, corrosion, and blockages in the compressor. Water treatment or filtration systems may be necessary to ensure the desired water quality.
Monitor Water Supply: Ensure a consistent and adequate water supply to the compressor. Monitor the flow rate and pressure of the water supply to ensure it meets the requirements of the compressor’s lubrication system. Insufficient water flow can lead to inadequate lubrication, increased friction, and potential damage to the compressor components.
Implement Proper Water Cooling: Compressed air generates heat during the compression process, and effective cooling is crucial to maintain safe operating temperatures and proper water lubrication. Ensure that the cooling mechanisms, such as water jackets or external cooling systems, are properly designed and sized to provide adequate cooling capacity. Monitor and control the water temperature to prevent overheating and ensure optimal lubrication.
Optimize Water Distribution: Proper water distribution within the compressor is essential for effective lubrication. Ensure that the water is evenly distributed to all the necessary lubrication points, such as the bearings or other moving parts. Proper design and installation of water distribution systems, including pipes, fittings, and nozzles, are important to achieve uniform water distribution and prevent any dry spots or inadequate lubrication.
Regular Maintenance: Implement a regular maintenance schedule for the water lubrication system. This includes periodic inspection and cleaning of water filters, strainers, or screens to prevent clogging and maintain proper water flow. Check for any leaks or malfunctions in the water distribution system and promptly address them. Regularly monitor water quality and perform any necessary water treatment or filtration to maintain optimal lubrication conditions.
Follow Manufacturer Guidelines: Always follow the manufacturer’s guidelines and recommendations for water lubrication. Manufacturers provide specific instructions regarding water quality, flow rates, cooling requirements, and maintenance procedures for their compressors. Adhering to these guidelines ensures that the compressor operates within its intended parameters and maintains proper water lubrication.

By following these practices, you can ensure proper water lubrication in air compressors, promoting efficient operation, minimizing wear and tear, and extending the lifespan of the equipment. Regular monitoring, maintenance, and adherence to manufacturer guidelines are crucial to optimize water lubrication and overall compressor performance.

air compressor

What Are the Considerations for Choosing Water-Lubricated vs. Oil-Lubricated Compressors?

When selecting between water-lubricated and oil-lubricated compressors, several considerations come into play. Here’s a detailed explanation of the key factors to consider when choosing between these two types:

Operating Environment:

Water Sensitivity: Water-lubricated compressors are well-suited for environments where water is readily available and can be easily supplied to the compressor system. On the other hand, oil-lubricated compressors are more suitable for applications where water is not readily available or where water contamination could pose a problem.
Cleanliness Requirements: If the application demands a high level of cleanliness, such as in certain manufacturing processes or cleanroom environments, water-lubricated compressors may be preferred. Water is inherently cleaner than oil and reduces the risk of oil contamination in sensitive operations.

Maintenance and Service:

Lubricant Replacement: Oil-lubricated compressors require regular oil changes and maintenance to ensure proper lubrication and performance. Water-lubricated compressors, on the other hand, eliminate the need for oil changes and associated maintenance tasks, simplifying the maintenance requirements.
Oil Contamination: Oil-lubricated compressors carry the risk of oil contamination in the compressed air system. This can be a concern in certain applications where oil contamination can negatively impact product quality or downstream equipment. Water-lubricated compressors reduce the risk of oil contamination, making them advantageous in such applications.

Environmental Impact:

Oil Disposal: Oil-lubricated compressors generate used oil that requires proper disposal in accordance with environmental regulations. Water-lubricated compressors eliminate the need for oil disposal, contributing to a reduced environmental impact.
Energy Efficiency: In terms of energy efficiency, water-lubricated compressors tend to have an advantage. Water has a higher specific heat capacity than oil, meaning it can absorb and dissipate heat more effectively. This can result in improved cooling efficiency and potentially lower energy consumption compared to oil-lubricated compressors.

Application-Specific Factors:

Operating Pressure: Water-lubricated compressors are generally suitable for lower to moderate operating pressures. Oil-lubricated compressors, on the other hand, can handle higher operating pressures, making them more appropriate for applications that require higher pressure levels.
Temperature Sensitivity: Water-lubricated compressors may have limitations in applications where low temperatures are encountered. Water freezing or becoming slushy can cause operational issues. Oil-lubricated compressors, with appropriate low-temperature oil formulations, can better handle such temperature-sensitive conditions.

Cost Considerations:

Initial Cost: Water-lubricated compressors generally have a lower initial cost compared to oil-lubricated compressors. This cost advantage can be attractive for applications with budget constraints.
Maintenance Cost: Over the long term, water-lubricated compressors may have lower maintenance costs due to the elimination of oil changes and associated maintenance tasks. However, it’s important to consider the specific maintenance requirements and costs associated with each type of compressor.

By considering these factors, including the operating environment, maintenance and service requirements, environmental impact, application-specific factors, and cost considerations, one can make an informed decision when choosing between water-lubricated and oil-lubricated compressors.

air compressor

What Maintenance Is Required for Water-Lubricated Air Compressors?

Maintaining water-lubricated air compressors involves several key maintenance tasks to ensure their optimal performance and longevity. Here are the maintenance requirements typically associated with water-lubricated air compressors:

Regular water quality checks: It is essential to monitor the quality of the water used for lubrication in the compressor. Regular water analysis helps identify any potential contaminants, such as minerals or impurities, that may affect compressor performance or lead to corrosion. If necessary, appropriate water treatment measures should be taken to maintain the desired water quality.
Drain and flush water systems: Periodically draining and flushing the water systems of the compressor helps remove any sediment, debris, or accumulated contaminants. This prevents blockages, maintains water flow, and ensures the cleanliness of the system.
Inspect and clean filters: Filters in the water system, such as intake filters or water separation filters, should be inspected regularly and cleaned or replaced as needed. Clean filters help maintain proper water flow, prevent clogging, and protect internal components from damage or corrosion.
Check for leaks: Regularly inspect the compressor system for any signs of water leaks. Leaks can lead to water loss, reduced lubrication performance, and potential damage to the compressor components. Any identified leaks should be promptly repaired to maintain the integrity of the system.
Monitor and maintain proper water levels: Ensure that the water levels in the compressor are maintained within the recommended range. Low water levels can result in inadequate lubrication and increased friction, while high water levels may lead to excessive moisture in the system. Regularly check and adjust the water levels as necessary.
Inspect and maintain cooling systems: Water-lubricated compressors often utilize water for cooling purposes. Inspect and maintain the cooling systems, such as heat exchangers or radiators, to ensure proper heat dissipation. Clean any accumulated debris or deposits that may impede cooling efficiency.
Follow manufacturer guidelines: It is crucial to follow the manufacturer’s maintenance guidelines and recommendations specific to the water-lubricated air compressor model being used. These guidelines may include additional maintenance tasks or intervals that are necessary for optimal performance and warranty compliance.

Regular and proactive maintenance of water-lubricated air compressors helps ensure their reliable operation, extends their lifespan, and minimizes the risk of performance issues or component failures. It is advisable to consult the compressor’s documentation and seek guidance from the manufacturer or a qualified technician to establish a comprehensive maintenance routine specific to the equipment.

China Custom Industrial Stationary Similar CHINAMFG Rand CHINAMFG 7 8 10 Bar 55kw Medical Oil Free Electric Direct Driven Pm VSD Rotary Screw Type Air Compressor mini air compressor
editor by CX 2024-05-14

China Best Sales 8 Bar 116 CHINAMFG Oil Free Oilless Rotary Screw Type Air Compressor Without Oil air compressor for car

Product Description

5-400 Kw Low Noise Electric Water Lubricated/Injected Oil Free Oilless Direct Coupling Rotary Screw Type Air Compressor Advantages

1.Clean air 100% oil-free

2.Use water instead of oil, higher cooling efficiency and compression efficiency

3.Optimal isothermal compression

4.Powerful MAM microcomputer controller and touch screen

5.Reasonable Structure, with perfect balancing

6.Components made of anti-rust and anti-corrosion materials ensure the durability

7.Significant energy saving, environmental-friendly and pollution-free

8.Designed especially for medical, pharmacy, instrument, coating, chemical industry and food processing, etc.

DENAIR Water-lubricated Oil Free Screw Air Compressor In Hannover Messe 2017

Technical Parameters Of Water-lubricated Oil-free Screw Air Compressor

Model	Maximum working pressure		Capacity(FAD)*								Installed motor power		Driving Mode & Cooling Method	Noise Level**	Dimensions (mm)			Weight	Air Outlet Pipe Diameter
			50Hz				60Hz
			Min.	Max.	Min.	Max.	Min.	Max.	Min.	Max.
	bar(e)	psig	m³/min	m³/min	cfm	cfm	m³/min	m³/min	cfm	cfm	kW	hp		[dB(A)]	L	W	H	kg
DVAW-15	7.5	109	1	2	36	71	1	2	36	71	15	20	Direct Driven Air Cooling W-water Cooling	63	1200	900	1200	650	G1″
	8.5	123	0.97	1.94	35	69	0.97	1.94	35	69	15	20		63	1600	1100	1500	650	G1″
	10.5	152	0.83	1.66	30	59	0.83	1.66	30	59	15	20		63	1200	900	1200	650	G1″
DVAW-18	7.5	109	1.41	2.81	50	99	1.41	2.81	50	99	18.5	25		66	1600	1100	1500	800	G1″
	8.5	123	1.35	2.7	48	95	1.35	2.7	48	95	18.5	25		66	1600	1100	1500	800	G1″
	10.5	152	1.1	2.19	39	77	1.1	2.19	39	77	18.5	25		66	1600	1100	1500	800	G1″
DVAW-22	7.5	109	1.74	3.48	62	123	1.74	3.48	62	123	22	30		66	1600	1100	1500	850	G1″
	8.5	123	1.73	3.46	61	122	1.73	3.46	61	122	22	30		66	1600	1100	1500	850	G1″
	10.5	152	1.36	2.73	48	96	1.36	2.73	48	96	22	30		66	1600	1100	1500	850	G1″
DVAW-30	7.5	109	2.64	5.27	93	186	2.64	5.27	93	186	30	40		69	1600	1100	1500	920	G1-1/2″
	8.5	123	2.58	5.15	91	182	2.58	5.15	91	182	30	40		69	1600	1100	1500	920	G1-1/2″
	10.5	152	1.78	3.55	63	125	1.78	3.55	63	125	30	40		69	1600	1100	1500	920	G1-1/2″
DVAW-37	7.5	109	3.25	6.5	115	229	3.25	6.5	115	229	37	50		69	1600	1100	1500	950	G1-1/2″
	8.5	123	3.13	6.26	111	221	3.13	6.26	111	221	37	50		69	1600	1100	1500	950	G1-1/2″
	10.5	152	2.61	5.21	92	184	2.61	5.21	92	184	37	50		69	1600	1100	1500	950	G1-1/2″
DVAW-45W	7.5	109	4.1	8.2	145	289	4.1	8.2	145	289	45	60		66	2200	1400	1800	1500	DN50
	8.5	123	3.9	7.81	138	276	3.9	7.81	138	276	45	60		66	2200	1400	1800	1500	DN50
	10.5	152	3.12	6.23	110	220	3.12	6.23	110	220	45	60		66	2200	1400	1800	1500	DN50
DVAW-55W	7.5	109	4.66	9.32	165	329	4.66	9.32	165	329	55	75		66	2200	1400	1800	1600	DN50
	8.5	123	4.43	8.86	157	313	4.43	8.86	157	313	55	75		66	2200	1400	1800	1600	DN50
	10.5	152	3.89	7.78	138	275	3.89	7.78	138	275	55	75		66	2200	1400	1800	1600	DN50
DVAW-75w	7.5	109	6.21	12.41	222	444	6.21	12.41	222	444	75	100		71	2200	1400	1800	1750	DN50
	8.5	123	6.2	12.39	219	438	6.2	12.39	219	438	75	100		71	2200	1400	1800	1750	DN50
	10.5	152	5.23	10.45	185	369	5.23	10.45	185	369	75	100		71	2200	1400	1800	1750	DN50
DVAW-90W	7.5	109	8.24	16.48	291	582	8.24	16.48	291	582	90	120		73	2400	1700	1800	2300	DN65
	8.5	123	8.18	16.36	289	578	8.18	16.36	289	578	90	120		73	2400	1700	1800	2300	DN65
	10.5	152	6.41	12.82	227	453	6.41	12.82	227	453	90	120		73	2400	1700	1800	2200	DN65
DVAW-110W	7.5	109	10.22	20.45	361	722	10.22	20.45	361	722	110	150		73	2400	1700	1800	2800	DN65
	8.5	123	9.91	19.82	350	700	9.91	19.82	350	700	110	150		73	2400	1700	1800	2800	DN65
	10.5	152	7.78	15.55	275	549	7.78	15.55	275	549	110	150		73	2400	1700	1800	2600	DN65
DVAW-132W	7.5	109	11	21.99	389	776	11	21.99	389	776	132	175		76	2400	1700	1800	3200	DN65
	8.5	123	10.97	21.94	388	775	10.97	21.94	388	775	132	175		76	2400	1700	1800	3200	DN65
	10.5	152	8.89	19.79	350	699	8.89	19.79	350	699	132	175		76	2400	1700	1800	3000	DN65

DENAIR Factory

At DENAIR, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CHINAMFG has been exporting to more than 90 countries across the globe. We have sales representatives who can speak English, Spanish, French, Russian and Arabic, which makes it easier for our clients from all over the world to interact and negotiate with us.

DENAIR Services

DENAIR Oil Free Screw Air Compressor Application and Installation

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2: Our company is located in No. 6767, Tingfeng Rd. Xihu (West Lake) Dis.n District, ZheJiang 201502, China
And our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd.,Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil-free
Cooling System:	Air Cooling/Water Cooling
Power Source:	AC Power

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

Can Water-Lubricated Air Compressors Be Used in Cold Climates?

Water-lubricated air compressors can be used in cold climates, but there are certain considerations and precautions to keep in mind. Here’s a detailed explanation of using water-lubricated air compressors in cold climates:

Freezing of Water:

Potential for Freezing: In cold climates, the water used for lubrication in water-lubricated compressors can freeze, which can cause operational issues and damage to the equipment. Freezing can occur in the water supply lines, lubrication system, or water jackets if the temperature drops below the freezing point of water.
Water Temperature: It is important to ensure that the water temperature remains above freezing throughout the compressor system. This can be achieved by using insulation, heat tracing, or heaters to maintain adequate water temperature. Monitoring the water temperature and implementing appropriate heating measures are crucial to prevent freezing-related problems.

Protection and Insulation:

Protecting External Components: External components of water-lubricated compressors, such as valves, fittings, and pipes, may be exposed to cold temperatures. Insulating these components can help prevent freezing and ensure their proper functioning. Insulation materials, such as foam wraps or heat tapes, can be used to provide thermal protection.
Water Supply Lines: Water supply lines that feed the compressor should be properly insulated and protected from freezing temperatures. Insulation can help maintain the water temperature and prevent freezing within the supply lines. Additionally, measures such as burying the supply lines below the frost line or using heat tracing cables can offer further protection against freezing.

Alternative Lubrication Methods:

Oil-Lubricated Compressors: In extremely cold climates, where freezing is a significant concern, using oil-lubricated compressors instead of water-lubricated ones may be a more practical option. Oil-based lubrication systems are less prone to freezing and can provide reliable operation in colder temperatures. However, it is important to consider the specific requirements and limitations of oil-lubricated compressors for the intended application.

Manufacturer Recommendations:

Consulting the Manufacturer: It is crucial to consult the manufacturer’s guidelines and recommendations regarding the use of water-lubricated compressors in cold climates. Manufacturers may provide specific instructions, modifications, or alternative solutions to ensure the safe and efficient operation of their equipment under cold weather conditions.

By implementing proper insulation, heating measures, and following the manufacturer’s guidance, water-lubricated air compressors can be used effectively in cold climates. It is important to assess the specific requirements of the application and consider the potential challenges associated with freezing temperatures to ensure the reliable and safe operation of the water-lubricated compressor system.

air compressor

Are There Regulations Governing the Use of Water-Lubricated Air Compressors?

When it comes to the use of water-lubricated air compressors, there are several regulations and standards that govern their operation and ensure compliance with safety, environmental, and performance requirements. Here’s a detailed explanation of the regulations related to water-lubricated air compressors:

1. Occupational Safety and Health Administration (OSHA) Regulations:

OSHA is a regulatory agency in the United States that sets and enforces workplace safety and health standards. While OSHA does not have specific regulations solely dedicated to water-lubricated air compressors, they have general regulations that apply to all types of air compressors. These regulations include requirements for safe operation, maintenance, and guarding of equipment to protect workers from hazards such as electrical shocks, mechanical injuries, and exposure to hazardous substances.

2. Environmental Protection Agency (EPA) Regulations:

The EPA is responsible for implementing and enforcing environmental regulations in the United States. Although there are no specific regulations for water-lubricated air compressors, the EPA has regulations that govern the discharge of water and other substances into the environment. If the water-lubricated compressor system involves the use of cooling water or generates wastewater, it may be subject to regulations related to water pollution control, water treatment, and proper disposal of wastewater.

3. International Organization for Standardization (ISO) Standards:

The ISO develops international standards that provide guidelines and requirements for various industries and technologies. ISO 8573 is a standard that addresses the quality of compressed air used in different applications. This standard sets limits and specifications for various contaminants in compressed air, including water content. Water-lubricated air compressors need to comply with the requirements of ISO 8573 to ensure the produced compressed air meets the desired quality standards.

4. Manufacturer Guidelines and Recommendations:

In addition to regulatory requirements, it is essential to follow the guidelines and recommendations provided by the manufacturers of water-lubricated air compressors. Manufacturers typically provide instructions for installation, operation, maintenance, and safety precautions specific to their equipment. Adhering to these guidelines is crucial to ensure the safe and proper functioning of the equipment and to maintain warranty coverage.

It’s important to note that the specific regulations and standards governing water-lubricated air compressors may vary depending on the country or region. Therefore, it is advisable to consult the relevant regulatory agencies, industry organizations, and local authorities to ensure compliance with applicable regulations and standards in a particular jurisdiction.

By complying with the relevant regulations, standards, and manufacturer guidelines, users of water-lubricated air compressors can ensure the safe and efficient operation of their equipment while minimizing any potential environmental impacts.

air compressor

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Water-lubricated air compressors can be highly suitable for the food and beverage industries due to several reasons:

Food-grade lubrication: Water is a natural and food-grade lubricant. It does not introduce harmful contaminants or chemicals into the production process, ensuring the safety and quality of food and beverage products. Water lubrication eliminates the risk of oil contamination in food products that can occur with oil-lubricated compressors.
Compliance with hygiene standards: The food and beverage industries have strict hygiene standards and regulations. Water-lubricated air compressors align with these standards as water is a clean and sanitary lubricant. It minimizes the risk of cross-contamination and helps maintain a hygienic production environment.
Reduced risk of product contamination: Water lubrication eliminates the possibility of oil carryover or oil vapor entering the compressed air system. This reduces the risk of oil contamination in food and beverage products, ensuring their purity and quality.
Improved product shelf life: Oil-lubricated compressors can release oil aerosols or vapors that may negatively affect the taste, odor, or quality of food and beverage products. Water-lubricated compressors eliminate this concern, contributing to improved product shelf life and maintaining the desired sensory attributes.
Easy cleanup and maintenance: Water lubrication simplifies cleanup and maintenance procedures in food and beverage production facilities. Water does not leave behind sticky residues or require extensive cleaning processes. It facilitates faster and more efficient cleaning, reducing downtime and improving overall productivity.
Environmental friendliness: Water is a sustainable and environmentally friendly lubricant choice. It is non-toxic, biodegradable, and does not contribute to air or water pollution. Using water-lubricated air compressors aligns with the sustainability goals of the food and beverage industries.

Considering these factors, water-lubricated air compressors are well-suited for the food and beverage industries, ensuring compliance with hygiene standards, preventing product contamination, and promoting a safe and sustainable production environment.

China Best Sales 8 Bar 116 CHINAMFG Oil Free Oilless Rotary Screw Type Air Compressor Without Oil air compressor for car
editor by CX 2024-05-13

China wholesaler CHINAMFG 2.5HP 50L Portable 8 Bar (115psi) 1800W Electric Oil-Free Air Compressor Machine wholesaler

Product Description

FIXTEC 2.5HP 50L Portable 8 bar(115psi) 1800W Electric Oil-Free Air Compressor Machine

Main Products

View more products,you can click product keywords…

Main Products
Power Tools	Bench Tools	Accessories
Hand Tools	Air Tools	Water Pumps
Welding Machine	Generators	PPE

Product Description

EBIC Tools is established in 2003, with rich experience in tools business, FIXTEC is our registered brand. One-stop tools station, including full line of power tools, hand tools, bench tools, air tools, welding machine, water pumps, generators, garden tools and power tools accessories etc.

Model NO.	FAC25501
Brand	CHINAMFG
Certificate	CE/ROHS/GS
Power	1800W, 2.5HP
Tank size	50L
Air delivery	206L/min
Pressure	8 bar(115psi)
Speed	2850RPM
Package	Brown box
Carton size	81x33x69cm
QTY/CTN	1PC
NW./GW.	35KG/37KG

Samples:	US$ 88.5/Piece 1 Piece(Min.Order) \| Request Sample

What Are the Key Components of a Water-Lubrication System in Compressors?

A water-lubrication system in compressors typically consists of several key components that work together to provide lubrication and cooling to the compressor. Here’s a detailed explanation of the key components of a water-lubrication system in compressors:

Water Supply:

Water Source: The water-lubrication system requires a water source that provides clean and suitable water for lubrication. The water can be sourced from various places such as municipal water supply, well water, or treated water from a dedicated water treatment system.
Water Inlet: The water inlet is the entry point where water enters the compressor’s lubrication system. It may include valves, filters, or other components to regulate and control the water flow.

Lubrication System:

Water Jackets: Water jackets are channels or passages built into the compressor’s housing or cylinder walls. These jackets allow water to circulate and come into direct contact with the compressor’s moving parts, providing lubrication and cooling. The water jackets help dissipate heat generated during compression and prevent excessive temperatures that could damage the compressor.
Water Pump: The water pump is responsible for circulating water through the water jackets and the entire lubrication system. It provides the necessary pressure to ensure adequate water flow and distribution to the compressor’s components.
Flow Control Devices: Flow control devices, such as valves or flow restrictors, are often included in the water-lubrication system to regulate and control the water flow rate. These devices help maintain optimal water pressure and flow throughout the system, ensuring effective lubrication and cooling.
Water Filters: Water filters are used to remove impurities, sediment, or debris from the water before it enters the lubrication system. They help prevent blockages, protect the compressor’s components from damage, and maintain the quality of the water used for lubrication.
Water Separator: A water separator is a component that removes excess water, moisture, or condensate from the compressed air. It ensures that the compressed air leaving the compressor is dry and free from excess water content, preventing potential issues such as corrosion or contamination downstream.

Control and Monitoring:

Temperature Sensors: Temperature sensors are used to monitor the temperature of the water and the compressor components. They provide feedback to the control system, allowing for adjustments in water flow or cooling measures if required to maintain optimal operating conditions.
Pressure Sensors: Pressure sensors are employed to monitor the water pressure within the lubrication system. They help ensure that the water flow and pressure are within the desired range, allowing for proper lubrication and cooling of the compressor.
Control System: A control system, which may include a combination of sensors, valves, and controllers, is responsible for regulating and maintaining the operation of the water-lubrication system. It can monitor various parameters, such as temperature, pressure, and flow, and make adjustments as needed to ensure efficient and safe operation.

Regular maintenance, inspection, and monitoring of the key components of the water-lubrication system are essential to ensure its proper functioning and to prevent any issues that could affect the performance and longevity of the compressor.

air compressor

Are There Any Potential Water-Related Issues with These Compressors?

Yes, there are potential water-related issues that can arise with water-lubricated compressors. Here’s a detailed explanation of some of the common water-related issues associated with these compressors:

Corrosion:

Internal Corrosion: Water-lubricated compressors are susceptible to internal corrosion due to the presence of water within the system. If the water used is not properly treated or if corrosion prevention measures are insufficient, the internal components of the compressor can corrode over time. Corrosion can lead to reduced performance, component damage, and the potential for leaks or system failures.
External Corrosion: External components such as piping, valves, and fittings can also be affected by corrosion if exposed to water and moisture. Corrosion on these external surfaces can lead to compromised integrity, leaks, and reduced system efficiency.

Water Quality:

Water Contaminants: The quality of the water used in water-lubricated compressors is crucial. If the water contains contaminants such as sediment, debris, oil, or chemicals, it can negatively impact the performance and reliability of the compressor. Contaminants can cause blockages, clogging, increased wear on components, reduced lubrication effectiveness, and potential damage to the compressor.
Water Hardness: Water hardness, characterized by high mineral content, can lead to scaling and deposits within the compressor and associated components. Scaling can restrict flow, impede heat transfer, and reduce the efficiency of the compressor. It can also contribute to fouling and corrosion issues.

Water Treatment and Filtration:

Inadequate Water Treatment: Insufficient or improper water treatment can lead to various issues. If the water is not adequately treated for contaminants, hardness, or pH levels, it can result in accelerated corrosion, scaling, fouling, and reduced lubrication effectiveness. Inadequate water treatment can also contribute to increased maintenance requirements and decreased overall compressor performance.
Filtration System Issues: Filtration systems play a crucial role in removing contaminants from the water. However, if the filtration system is not properly maintained, filters become clogged or damaged, or if there are design or installation issues, it can lead to inadequate filtration and compromised water quality. This can result in the accumulation of contaminants, reduced lubrication performance, and potential damage to the compressor.

Water Supply and Availability:

Insufficient Water Supply: Water-lubricated compressors rely on a consistent and reliable water supply. If the water supply is insufficient in terms of flow rate, pressure, or quality, it can impact the compressor’s operation and performance. Inadequate water supply can lead to inadequate lubrication, reduced cooling capacity, and increased wear on components.
Water Source Availability: The availability of a suitable water source is essential for water-lubricated compressors. In certain locations or applications, accessing clean water or meeting specific water quality requirements may pose challenges. Lack of a suitable water source can limit the feasibility or effectiveness of using water-lubricated compressors.

It is important to address these potential water-related issues by implementing proper water treatment, corrosion prevention measures, regular maintenance of filtration systems, and monitoring of water quality. Adhering to manufacturer guidelines, performing regular inspections, and taking proactive measures can help mitigate these issues and ensure the reliable and efficient operation of water-lubricated compressors.

air compressor

Are There Any Downsides to Using Water-Lubricated Air Compressors?

While water-lubricated air compressors offer several advantages, there are also some downsides to consider when using this type of compressor. Here are a few potential drawbacks associated with water-lubricated air compressors:

Water quality requirements: Water-lubricated compressors are highly dependent on the quality of the water used for lubrication. The water should be free from contaminants, minerals, and impurities that can affect the compressor’s performance or cause corrosion. Ensuring the consistent availability of high-quality water may require additional filtration or treatment processes, which can add complexity and cost to the system.
Increased maintenance: Compared to oil-lubricated compressors, water-lubricated models may require more frequent maintenance. Regular checks, cleaning, and monitoring of the water system are necessary to prevent blockages, maintain proper water flow, and ensure the cleanliness of the compressor. This increased maintenance requirement can result in higher operational costs and more downtime for maintenance activities.
Potential for corrosion: While water itself is not corrosive, certain water conditions, such as high mineral content or low pH levels, can promote corrosion within the compressor system. Corrosion can lead to component damage, reduced efficiency, and the need for repairs or replacements. Implementing corrosion prevention measures, such as water treatment or the use of corrosion-resistant materials, may be necessary to mitigate this risk.
Compatibility limitations: Water-lubricated compressors may have limitations when it comes to compatibility with certain materials or gases. For example, in applications where the compressed air comes into contact with sensitive materials or requires specific gas purity, the use of water as a lubricant may not be suitable. In such cases, alternative lubrication methods or compressor types may be more appropriate.
Environmental considerations: While water is generally considered environmentally friendly, the disposal of used water from the compressor system may require proper wastewater management. Depending on local regulations and requirements, additional steps may be needed to ensure compliant and environmentally responsible disposal of the water used for lubrication.

Despite these potential downsides, water-lubricated air compressors continue to be used in various industries and applications due to their specific advantages and suitability for certain environments. It is important to carefully evaluate the specific requirements, operating conditions, and maintenance considerations of a given application to determine whether a water-lubricated compressor is the most suitable choice.

China wholesaler CHINAMFG 2.5HP 50L Portable 8 Bar (115psi) 1800W Electric Oil-Free Air Compressor Machine wholesaler
editor by CX 2024-04-26

China Good quality New Technology Long Life Dual Piston Electric 1490W 15L 8 Bar Oil Free Paint Spray Gun Air Compressor air compressor for sale

Product Description

Oil-free compressor is a special type of compressor whose main feature is that it does not use lubricating oil or oil seals during operation. These compressors are often used in special applications where the lubricant may adversely affect product quality or the environment.
Advantages of oil-free compressor:
Environmentally friendly: Oil-free compressors do not require the use of lubricating oil, so there is no lubricating oil waste or pollution. This helps reduce negative impact on the environment.

No oil pollution: The gas produced by oil-free compressors does not contain oil and is suitable for applications that require high gas purity, such as the food and pharmaceutical industries.

Low maintenance costs: Since oil-free compressors do not require regular lubricant changes or oil seal maintenance, their maintenance costs are relatively low.

Improve production efficiency: Oil-free compressors operate stably without having to worry about lubricant replacement or leakage issues, which helps improve production efficiency.

Avoid problems caused by lubricants: In some applications, lubricants can cause product contamination or adversely affect equipment. Oil-free compressors can avoid these problems.

Detailed Photos

Product Parameters

Model	Power(w)	Voltage(v)	Rotating speed(r/min)	Exhaust volume(m³/min)	Maximum air pressure(map)	Volume(L)	weight(kg)	size(mm)
1490w-9L	1490w	220v	2880	0.21	0.8	9L	20	430205450
1490w-15L	1490W	220V	2880	0.21	0.8	15L	22	480205485
1490w-30L	1490w	220v	2880	0.21	0.8	30L	25	540240510
1490W-50L	1490W	220V	2880	0.42	0.8	50L	36	680300560
1490W-120L	1490W	220V	2880	0.63	0.8	120L	44	930370680
1490W-160L	1490W	220V	2880	0.84	0.8	160L	65	1180370740
1800W-30L	1800W	220V	2880	0.26	0.8	30L	25	540240510
1800W-55L	1800W	220V	2880	0.52	0.8	55L	36	750300600
1800W-160L	1800W	220V	2880	0.78	0.8	160L	63	1200370750
1800W-200L	1800W	220V	2880	1.04	0.8	200L	84	1400370750
2000W-30L	2000W	220V	2880	0.26	0.8	30L	13	550240540
2000w-55L	2000W	220V	2880	0.52	0.8	55L	32	750300600
2000W-160L	2000W	220V	2880	0.78	0.8	160L	73	1080350750
2000W-200L	2000W	220V	2880	1.04	0.8	200L	80	1320350750
2200w-70L	2200W	220V	2880	0.52	1.0	70L	45	820350650
2200W-180L	2200W	220V	2880	0.78	1.0	180L	90	1350400850
2200W-220L	2200W	220V	2880	1.04	1.0	220L	105	1500400850
2200w-120L	2200w	380V	2880	0.52	1.0	120L	55	1200350760
2200W-180L1	220W	380V	2880	0.78	1.0	180L	90	1350400850
2200W*220L1	2200W	380V	2880	1.04	1.0	220L	105	1500400850

Company Profile

FAQ

1. why should you buy from us not from other suppliers?
Feida Mining Machinery Co., Ltd. has been researching and producing water well drilling rig, DTH drilling rig and supporting
equipment for 20 years.FY series products have the characteristics of high drilling speed, economy and low failure rate

2.what can you buy from us?
water Well Drilling Machine,Drilling Tools and Accessories,Screw Air Compressor

3. How can we guarantee quality?
Always a pre-production sample before mass production;always final inspection is done before shipment;and our main unit has a one-year warranty, during which all damaged accessories can be replaced with new ones. We provide machine installation and operation videos.

4.Can you do OEM for me?
We accept all OEM orders,just contact us and give me your design.we will offer you a reasonable price and make samples for you ASAP.

5.Are you a manufacturer or trading company?
We are professional manufacturer with big modern factory in ZheJiang ,China.

6.Do you have any certificates for your machine?
All of our products coming with the certificates of CE,ISO9001.

7. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency:USD,EUR,CAD,AUD,GBP,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,PayPal,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Technical Support
Warranty:	6 Months
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Balanced Opposed Arrangement
Cylinder Position:	Angular

Customization:	Available \|

air compressor

What Industries Commonly Use Water-Lubricated Air Compressors?

Water-lubricated air compressors find applications in various industries where specific operating conditions or regulatory requirements make them a preferred choice. Here are some industries that commonly utilize water-lubricated air compressors:

Food and Beverage: Water-lubricated compressors are often used in the food and beverage industry due to their ability to provide clean, oil-free compressed air. Compressed air is widely used in food processing and packaging applications, such as pneumatic conveying, product mixing, bottle blowing, and food packaging. Water-lubricated compressors help maintain product purity, prevent oil contamination, and comply with stringent food safety standards.
Pharmaceutical and Healthcare: The pharmaceutical and healthcare industries have strict requirements for compressed air quality, especially in applications where compressed air comes into direct contact with pharmaceutical products or is used in critical medical equipment. Water-lubricated compressors offer a viable solution by providing lubrication without the risk of oil contamination. They are commonly used for processes such as air agitation, medical device manufacturing, and laboratory applications.
Electronics and Semiconductors: In electronics and semiconductor manufacturing, where sensitive components and cleanroom environments are involved, oil-free compressed air is essential. Water-lubricated compressors can provide the required level of air purity without introducing oil particles or vapors that could contaminate the electronics or semiconductor production processes. They are used in applications such as chip manufacturing, circuit board assembly, and cleanroom air supply.
Textile and Garment: Water-lubricated compressors are utilized in the textile and garment industry, where the presence of oil can negatively impact the quality and appearance of fabrics or garments. Compressed air is widely used in textile machinery for tasks such as spinning, weaving, and air jet looms. Water-lubricated compressors ensure oil-free air supply, preventing oil stains or contamination that could affect the final textile or garment products.
Environmental and Wastewater Treatment: Water-lubricated compressors are also employed in environmental and wastewater treatment applications. These compressors help supply air for aeration processes in wastewater treatment plants, where air is introduced into the treatment tanks to facilitate the growth of beneficial bacteria for biological treatment. Water-lubricated compressors provide oil-free compressed air, ensuring the purity and effectiveness of the treatment process.

While the industries mentioned above commonly use water-lubricated air compressors, it is important to note that these compressors may also find applications in other sectors where oil-free, contamination-free compressed air is required for specific processes or environmental considerations.

air compressor

How Do You Troubleshoot Common Problems with Water-Lubrication Systems?

When encountering common problems with water-lubrication systems, it is essential to follow a systematic troubleshooting approach. Here’s a detailed explanation of the steps involved in troubleshooting common issues with water-lubrication systems:

Step 1: Identify the Problem:

The first step is to identify the specific problem or symptom that is affecting the water-lubrication system. Common problems may include inadequate lubrication, water leaks, abnormal noises, or reduced system performance. Understanding the specific issue will help in determining the appropriate troubleshooting steps.

Step 2: Check Water Supply:

Verify that there is a proper water supply to the system. Ensure that the water source is connected and flowing adequately. Check for any obstructions or restrictions in the water lines that may be affecting the water flow to the lubrication system.

Step 3: Inspect Water Filters and Strainers:

Water filters and strainers are used in water-lubrication systems to remove debris and impurities from the water. Inspect these filters and strainers for clogs or blockages that may be hindering the water flow. Clean or replace the filters as necessary to ensure proper water filtration.

Step 4: Verify Water Pressure:

Check the water pressure within the system to ensure it falls within the recommended range. Low water pressure can result in inadequate lubrication, while high water pressure can cause leaks or damage to the system. Use a pressure gauge to measure the water pressure and adjust it if necessary according to the manufacturer’s guidelines.

Step 5: Examine Water-Lubrication Components:

Closely inspect the various components of the water-lubrication system, including the water pump, distribution lines, lubrication points, and seals. Look for signs of wear, damage, or misalignment that may be contributing to the problem. Tighten loose connections and replace any damaged or worn-out components as needed.

Step 6: Check for Air in the System:

Air trapped within the water-lubrication system can affect its performance. Bleed the system to remove any trapped air. Follow the manufacturer’s instructions for bleeding air from the system, which typically involves opening specific valves or vents until a steady flow of water is achieved.

Step 7: Inspect Cooling Mechanisms:

Water-lubrication systems often incorporate cooling mechanisms, such as heat exchangers or radiators, to dissipate excess heat. Inspect these cooling components for blockages, corrosion, or leaks that may be compromising their effectiveness. Clean or repair the cooling mechanisms as necessary to ensure proper heat dissipation.

Step 8: Consult Manufacturer Documentation:

If the troubleshooting steps above do not resolve the problem, refer to the manufacturer’s documentation, such as the user manual or technical specifications. These resources may provide specific troubleshooting guidelines, diagnostics, or additional maintenance procedures for the water-lubrication system.

Step 9: Seek Professional Assistance:

If the problem persists or if the troubleshooting steps are beyond your expertise, it is advisable to seek professional assistance. Contact the manufacturer’s technical support or consult a qualified technician with experience in water-lubrication systems. They can provide expert guidance and assistance in resolving complex issues.

By following these troubleshooting steps, you can effectively identify and address common problems encountered in water-lubrication systems, ensuring optimal performance and reliability.

air compressor

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Water-lubricated air compressors can be highly suitable for the food and beverage industries due to several reasons:

Food-grade lubrication: Water is a natural and food-grade lubricant. It does not introduce harmful contaminants or chemicals into the production process, ensuring the safety and quality of food and beverage products. Water lubrication eliminates the risk of oil contamination in food products that can occur with oil-lubricated compressors.
Compliance with hygiene standards: The food and beverage industries have strict hygiene standards and regulations. Water-lubricated air compressors align with these standards as water is a clean and sanitary lubricant. It minimizes the risk of cross-contamination and helps maintain a hygienic production environment.
Reduced risk of product contamination: Water lubrication eliminates the possibility of oil carryover or oil vapor entering the compressed air system. This reduces the risk of oil contamination in food and beverage products, ensuring their purity and quality.
Improved product shelf life: Oil-lubricated compressors can release oil aerosols or vapors that may negatively affect the taste, odor, or quality of food and beverage products. Water-lubricated compressors eliminate this concern, contributing to improved product shelf life and maintaining the desired sensory attributes.
Easy cleanup and maintenance: Water lubrication simplifies cleanup and maintenance procedures in food and beverage production facilities. Water does not leave behind sticky residues or require extensive cleaning processes. It facilitates faster and more efficient cleaning, reducing downtime and improving overall productivity.
Environmental friendliness: Water is a sustainable and environmentally friendly lubricant choice. It is non-toxic, biodegradable, and does not contribute to air or water pollution. Using water-lubricated air compressors aligns with the sustainability goals of the food and beverage industries.

China Good quality New Technology Long Life Dual Piston Electric 1490W 15L 8 Bar Oil Free Paint Spray Gun Air Compressor air compressor for sale
editor by CX 2024-04-17

China best Energy Saving 185 Kw 250 HP Direct Drive 7 Bar 8 Bar 10 Bar Water-Lubricated Oil-Free Rotary Single Screw Type Pm VSD Air Compressor mini air compressor

Product Description

2~40bar DIRECT-DRIVE WATER-INJECTED OIL-FREE SCREW AIR COMPRESSOR (PM VSD)

1. Low temperature means more efficiency
With an exceptionally low running temperature of less than 60ºC, near isothermal compression is achieved.
The superior cooling capability of water removes the heat and gives more air per kW of power.
This also eliminates the need for an internal cooler and aftercooler, the associated power consumption reduces pressure drop to a minimum.

2. Cutting the maintenance cost
Spare parts only need air filter elements and water filter elements
Low operating temperature ensures the long service life of the screw air end, avoiding expensive maintenance costs for the screw rotor.
Low temperature reduces the stress on other components ensuring long life.

3. Avoiding the costs of extra energy to combat pressure drop
These costs, although not apparent at the time of purchase, are very high and contribute substantially to the total cost of ownership.

4. No Gearbox No need for associated oil lubrication.

5. Simple structure
Fewer moving parts than the dry oil-free screw air compressor, meaning there is less to go wrong,
while balance bearing loads extend the compression element service life for low-cost operation.

Product Parameters

Product Description

Company Profile

Hot Sale Products

2~10bar Oil-injected 7~16bar All-in-1 Small Single-phase
Screw Air Compressor Screw Air Compressor Screw Air Compressor

2~40bar 100% Oil-free 8~12bar 100% Oil-free Diesel Engine Portable
Screw Air Compressor Scroll Air Compressor Screw Air Compressor

Main Product

What we can supply:

* Oil-injected Screw Air Compressor (2~16 bar)
* All-in-1 Screw Air Compressor with Tank, Dryer, and Filters (7~16 bar)
* Single-phase Small Screw Air Compressor for Home use (8~10 bar)
* Water-injected Oil-free Screw Air Compressor (2~40 bar)
* Oil-free Scroll Air Compressor (8~12 bar)
* Diesel&Electric Engine Portable Screw Air Compressor (8~30 bar)
* Air Dryer, Air tank, Filters, and other Spare parts

After-sales Service:	24*7 Online Services and Video Guide
Warranty:	1 Year for The Whole Machine & 2 Years for Air End
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

Can Water-Lubricated Compressors Be Used in High-Pressure Applications?

Water-lubricated compressors can be used in high-pressure applications, but there are certain considerations and limitations to keep in mind. Here’s a detailed explanation:

Water-lubricated compressors are typically designed for lower to medium-pressure ranges. They are commonly used in applications where the required discharge pressure does not exceed a certain threshold, typically up to a few hundred pounds per square inch (psi). However, there are specialized water-lubricated compressors available that can handle higher pressures, depending on the specific design and construction.

The ability of a water-lubricated compressor to operate at high pressures depends on several factors:

Compressor Design: The design and construction of the compressor play a crucial role in determining its maximum pressure rating. Compressors designed for high-pressure applications need to have robust components, such as reinforced casings, high-strength materials, and proper sealing mechanisms to withstand the elevated pressures. Special attention should be given to the design of the water-lubricated bearing system to ensure it can handle the increased loads and pressures.
Water Supply and Cooling: High-pressure compressors generate more heat during the compression process, requiring efficient cooling mechanisms to maintain safe operating temperatures. Sufficient water supply and cooling capacity must be available to handle the increased heat load. Adequate flow rates, temperature control, and cooling methods, such as water jackets or external cooling systems, may be necessary to prevent overheating and ensure proper lubrication and cooling of the compressor components.
Water Quality: The quality of the water used for lubrication becomes even more critical in high-pressure applications. Any impurities, contaminants, or minerals present in the water can cause increased wear, corrosion, or blockages, jeopardizing the compressor’s performance and reliability. Water treatment or filtration systems may be required to maintain the desired water quality and prevent damage to the compressor.
Sealing and Leakage Control: As the pressure increases, it becomes more challenging to maintain effective sealing and prevent leakage in the compressor system. Proper sealing mechanisms, such as high-quality seals and gaskets, are essential to ensure minimal leakage and maintain the required pressure levels. Adequate monitoring and maintenance of the sealing components are necessary to prevent energy losses and ensure the compressor’s efficiency.

It’s worth noting that for extremely high-pressure applications, water-lubricated compressors may not be the most suitable choice. In such cases, alternative lubrication methods, such as oil or specialized lubricants, are often preferred to handle the extreme pressures and provide adequate lubrication and cooling.

When considering the use of water-lubricated compressors in high-pressure applications, it is crucial to consult with the compressor manufacturer or a qualified engineer to ensure that the chosen compressor model is specifically designed and rated for the desired pressure range. Proper installation, maintenance, and adherence to the manufacturer’s guidelines are essential to ensure the safe and efficient operation of the compressor in high-pressure conditions.

air compressor

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Filtration plays a crucial role in water-lubricated air compressors, serving several important purposes. Here’s a detailed explanation of the role of filtration in water-lubricated air compressors:

Contaminant Removal:

Particle Filtration: Filtration systems in water-lubricated air compressors are designed to remove particles and contaminants from the water. These can include sediment, rust, debris, and other solid particles that may be present in the water supply. Removing these contaminants is essential to prevent blockages, clogging, and damage to the compressor components.
Oil Removal: In some cases, water used in compressors may contain traces of oil or hydrocarbons. Filtration systems can also help remove oil and hydrocarbon contaminants from the water, ensuring that the lubrication system remains clean and effective.

Protection of Components:

Lubrication System: Filtration prevents contaminants from reaching the lubrication system of water-lubricated air compressors. This helps maintain the cleanliness and integrity of the lubricant, ensuring optimal lubrication performance and minimizing wear on the compressor’s moving parts. Clean and filtered water can enhance the efficiency and lifespan of the compressor’s lubrication system.
Heat Exchangers and Cooling Systems: Water-lubricated compressors often rely on heat exchangers and cooling systems to regulate the temperature of the compressed air and the compressor itself. Filtration helps protect these components by preventing the accumulation of debris and contaminants that can hinder heat transfer and reduce the cooling efficiency. Clean water free from particles and contaminants promotes effective heat exchange and cooling.

Prevention of System Fouling:

Scaling and Deposits: Filtration systems also help prevent scaling and deposits that can occur when water with high mineral content or hardness is used. These deposits can accumulate on the internal surfaces of the compressor, heat exchangers, or other components, reducing their efficiency and potentially causing operational issues. By removing impurities and controlling mineral content, filtration minimizes the risk of scaling and deposits.

Extended Equipment Lifespan:

Component Protection: By effectively removing contaminants, filtration systems contribute to the protection and longevity of water-lubricated air compressor components. Clean and filtered water reduces the risk of component wear, corrosion, fouling, and blockages, ultimately extending the lifespan of the compressor and reducing maintenance and replacement costs.

Regular Maintenance and Monitoring:

Filter Replacement: Filtration systems require regular maintenance, including the replacement or cleaning of filters. The frequency of filter replacement depends on factors such as water quality, usage conditions, and the specific requirements of the compressor manufacturer. Regular maintenance ensures that the filtration system continues to effectively remove contaminants and protect the compressor components.
Monitoring Water Quality: Alongside filtration, monitoring the quality of the water used in water-lubricated compressors is essential. This can involve periodic water analysis, measurement of key parameters such as pH or conductivity, and visual inspections. Monitoring helps identify any changes in water quality or potential issues with the filtration system, allowing for timely maintenance or corrective actions.

In summary, filtration plays a critical role in water-lubricated air compressors by removing contaminants, protecting components, preventing system fouling, and extending equipment lifespan. By maintaining clean and filtered water, filtration systems contribute to the efficient operation, reliability, and longevity of water-lubricated compressors.

air compressor

What Maintenance Is Required for Water-Lubricated Air Compressors?

Regular water quality checks: It is essential to monitor the quality of the water used for lubrication in the compressor. Regular water analysis helps identify any potential contaminants, such as minerals or impurities, that may affect compressor performance or lead to corrosion. If necessary, appropriate water treatment measures should be taken to maintain the desired water quality.
Drain and flush water systems: Periodically draining and flushing the water systems of the compressor helps remove any sediment, debris, or accumulated contaminants. This prevents blockages, maintains water flow, and ensures the cleanliness of the system.
Inspect and clean filters: Filters in the water system, such as intake filters or water separation filters, should be inspected regularly and cleaned or replaced as needed. Clean filters help maintain proper water flow, prevent clogging, and protect internal components from damage or corrosion.
Check for leaks: Regularly inspect the compressor system for any signs of water leaks. Leaks can lead to water loss, reduced lubrication performance, and potential damage to the compressor components. Any identified leaks should be promptly repaired to maintain the integrity of the system.
Monitor and maintain proper water levels: Ensure that the water levels in the compressor are maintained within the recommended range. Low water levels can result in inadequate lubrication and increased friction, while high water levels may lead to excessive moisture in the system. Regularly check and adjust the water levels as necessary.
Inspect and maintain cooling systems: Water-lubricated compressors often utilize water for cooling purposes. Inspect and maintain the cooling systems, such as heat exchangers or radiators, to ensure proper heat dissipation. Clean any accumulated debris or deposits that may impede cooling efficiency.
Follow manufacturer guidelines: It is crucial to follow the manufacturer’s maintenance guidelines and recommendations specific to the water-lubricated air compressor model being used. These guidelines may include additional maintenance tasks or intervals that are necessary for optimal performance and warranty compliance.

China best Energy Saving 185 Kw 250 HP Direct Drive 7 Bar 8 Bar 10 Bar Water-Lubricated Oil-Free Rotary Single Screw Type Pm VSD Air Compressor mini air compressor
editor by CX 2023-12-06

China Professional 8 Bar 100 HP Variable Speed Inverter Air CHINAMFG lowes air compressor

Product Description

8 Bar 100 HP Variable Speed Inverter Air Screw Compressor

Model: RDF-100A
Free air delivery: 12.8 m3/min
Working pressure: 8 bar
Control: automatic PLC controller
Driven: direct driven, elastic coupling
Cooling: by air
Starting: Frequency conversion start
Electric motor: VSD 100hp 75kw 380V/50hz/3ph
Discharge temperature: less than ambient +8 ºC
Noise: less than 72 dB(A)
Air outlet size: G2″
Dimension: 2000*1120*1590mm
Weight: 1291kg

Variable frequency screw air compressor:
1. Constant pressure control: It can realize high-precision constant pressure control with a pressure fluctuation range of 0.01 MPa;
2. Variable frequency soft start: Eliminate the CHINAMFG current when starting, avoid grid impact, avoid current impact through step-by-step speed adjustment, and improve flexibility
3. Prevent no-load: The compressor is no-load during operation, reducing ineffective energy consumption;
Permanent magnet motors use high-efficiency rare earth magnets, no loss of magnetism at 180°C, and long service life; energy saving is about 6% to 7% compared with ordinary frequency conversion motors;
It can exert the highest efficiency in a wider range and make the air compressor more energy-saving.

Product Parameters

Technical Parameters

Model	Volume flow m3/min				Power (KW)	Noise (DB)	Outlet diameter	Dimension (mm)			Weight (kg)
Model	0.7Mpa	0.8Mpa	1.0Mpa	1.3Mpa	Power (KW)	Noise (DB)	Outlet diameter	Length	Width	Height	Weight (kg)
RDF-30A	3.7	3.6	3.2	/	22	68	G1	1330	830	1265	400
RDF-40A	5.2	5	/	3.3	30	68	G1	1330	830	1265	500
RDF-50A	6.5	6.2	5.6	4.9	37	69	G1 1/2	1500	940	1415	655
RDF-60A	8.0	7.3	6.0	5.9	45	70	G1 1/2	1500	940	1415	730
RDF-75A	10.1	9.5	8.7	7.3	55	70	G2	1600	1060	1470	945
RDF-100A	13.6	12.8	11.3	9.2	75	72	G2	2000	1120	1590	1291
RDF-125A	16.1	15.5	13.6	12.5	90	72	G2	2000	1120	1590	1421
RDF-150A	21.2	19.6	17.8	15.5	110	72	DN65	2400	1630	1980	2170
RDF-175A	24.1	23.2	19.5	17.8	132	72	DN65	2400	1630	1980	2350
RDF-220A	28.8	27.8	23.0	20	160	72	DN80	2800	1828	2150	3620
RDF-250A	32.5	31.2	27.5	25.8	185	72	DN80	2800	1828	2150	3920
RDF-275A	34.5	34.0	30.5	28.0	200	76	DN80	2800	1828	2150	4200
RDF-300A	36.8	34.7	31.5	29.5	220	76	DN100	3000	1900	1930	4800
RDF-350A	43.0	41.5	38.0	34.9	250	76	DN100	3000	1900	1930	5200
RDF-375A	51.3	50.6	46.0	41.5	280	82	DN100	4360	2150	2258	7500
RDF-420A	56.8	55.9	50.1	42.0	315	82	DN125	4360	2150	2258	7500
RDF-475W	66.1	65.4	55.1	46.0	355	82	DN125	4360	2150	2258	8000
RDF-525W	75.1	74.3	64.5	54.0	400	82	DN125	4360	2150	2258	8200

Application industry

Successful cases

Packaging & Shipping

1.Packing Details: Plywood crate pallet plus foam board and bubble film, Full closed wooden case. 1pcs/each package (for stationary screw air compressor)
2.Shipping method: by sea, by LCL/FCL or as requested
3.Delivery method: FOB, CFR, CIF and EXW etc.
4.Delivery time: in 7-15 days after receiving deposit (customized machines not included)

Certifications

Company Profile

FAQ

Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.

Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.

Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.

Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.

Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.

Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.

Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.

Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.

Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.

Q10.How long could your air compressor be used?
A: Generally, more than 10 years.

After-sales Service:	Online Support
Warranty:	24month
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What is the impact of humidity on compressed air quality?

Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

1. Corrosion:

High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

2. Contaminant Carryover:

Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

3. Decreased Efficiency of Pneumatic Systems:

Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

4. Product Contamination:

In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

5. Increased Maintenance Requirements:

Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

6. Adverse Effects on Instrumentation:

Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

air compressor

Can air compressors be used for inflating tires and sporting equipment?

1. Tire Inflation:

2. Sporting Equipment Inflation:

3. Air Tools for Inflation:

4. Adjustable Pressure:

5. Efficiency and Speed:

6. Portable Air Compressors:

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China Professional 8 Bar 100 HP Variable Speed Inverter Air CHINAMFG lowes air compressor
editor by CX 2023-11-16

China high quality Portable 550W Silent 8 Bar Oil Free Piston Air Compressor for Painting/Home Decoration/Laboratory with high quality

Product Description

Portable 550W Silent 8 Bar Oil Free Piston Air Compressor for Painting, Home Decoration, Laboratory

Specification:

MODEL	CYLINDER	CYLINDER	DISTANCE	VOLUME	POWER		SPEED	THEORETIC	WORK		NOISE	WEIGHT	DIMENSIONS
	CYLINDER	NUMBER	DISTANCE	VOLUME	POWER		SPEED	DISPLACEMENT	PRESSURE		NOISE	WEIGHT	DIMENSIONS
	MM	EN	MM	L	KW	HP	RPM	L/MIN	BRA	PSI	(DB)	KG	LXWXH(CM)
ZL750-24L	64	2	14	24	0.75	1	1400	60	7	100	68	21	50x23x58
ZL750*2-50L	64	4	14	50	1.5	2	1400	120	7	100	68	48	71x36x67
ZL750*3-80L	64	6	14	80	2.2	3	1400	180	7	100	70	68	90x36x73.5
ZL750*6-140L	64	12	14	140	4.8	6	1400	360	7	100	72	140	145x42x77
ZLDG550-24L	64	2	11	24	0.55	0.8	1400	40	7	100	65	27.5	44.5×44.5×57.5
ZLDG1100-50L	70	2	18	50	1.1	1.5	1400	110	7	100	70	41	44x44x85
ZLDG1500-50L	70	2	22	50	1.5	2	1400	130	7	100	70	45	44x44x85
ZLDGS1100-50L	70	2	18	50	1.1	1.5	1400	110	7	100	70	41	44x44x85
ZLDGS1500-50L	70	2	22	50	1.5	2	1400	130	7	100	70	45	44x44x85
ZL1100*2-100L	70	4	18	100	2.2	3	1400	220	7	100	72	100	108×39.5×90.5
ZL1500*2-140L	70	4	22	140	3	4	1400	260	7	100	72	110	119x45x95
ZL1100*3-150L	70	6	18	150	3.3	4.4	1400	330	7	100	72	136	127x43x85
ZL1500*3-200L	70	6	22	200	4.5	6	1400	390	7	100	73	155	132x49x97
ZL1100*4-180L	70	8	18	180	4.5	6	1400	440	7	100	73	168	151x45x93
ZL1500X4-180L	70	8	22	240	6	8	1400	520	7	100	73	188	155x49x98

For More Products

Our Exhibition

Why Trust Us ?

Who Are We ?

Tai zhou Mechanical &Electrical Co.Ltd. Is 1 of the main manufactures,specializing in the Research and Development,Manufacturing and sales of the Piston air compressor. Our company located in the CHINAMFG town,LuQiao District, TaiZhou City, far from TaiZhou Airport is only 3KM,and HangZhou port is around 220KM,the traffic is very convenient for your.visiting.
Our company owns an area of 50000 suqare mater and has more than 300 staffs.

We have advanced production equipment and well familiar with the process of the mass production,have high precision measuring instruments and high efficiency of automatic assembly line ensure the quality and quantity of the [roduct. We have strong technical strength and production management ,gathering the technical team and manamement team from the leading enterprise of air compressor in domestic .we set up our town lad and development tesm,with a strong ability to develop thre product ,meeting the diffient demand from the different customer and different ,maket.

We take the maket demand as the guidance ,strives for the survival by quality ,strives for the development by innovation,always put customers,quality and innovation in the first place ,follow up the prefessional management and continuously satisfy the demanded of the customer,We always follow up the principle of people-oriented,legitimate business,honest & trustworthy,focus on the industy of the air compressor,with the effort to create a first-class brand in the industry of air compressor ,with the effort to create a first-class brand in the industry of air compressor.

Frequency Asked Question:

Q1: Are you factory or trade company?
A1: We are factory.Thank you.

Q2: What the exactly address of your factory?
A2: Our company located in the CHINAMFG town,LuQiao District, TaiZhou, ZHangZhoug Province, China . Thank you.

Q3: Warranty terms of your air compressor machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the air compressor?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: About 25 working days after receiving the deposit on our bank account

.Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome

Q7:What trad terms do we provide ?
A7:Trade terms FOB,CIF.

Q8:What is our payment term? What kind of settlement currency do we offer ?
A8:Normally, we can do T/T and LC at sight, for the T/T, 30% will be required as deposit, the balance amount against the copy of the BL.
We can accept the currency in USD or RMB.

Q9:What about the cost of sample?
A9: The cost of the sample will be required, but we can return back the amount in the future order by 1*40’HQ.

After-sales Service:	Online Support
Warranty:	12 Months
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Duplex Arrangement
Cylinder Position:	Vertical

Samples:	US$ 200/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What Are the Key Components of a Water-Lubrication System in Compressors?

Water Supply:

Water Source: The water-lubrication system requires a water source that provides clean and suitable water for lubrication. The water can be sourced from various places such as municipal water supply, well water, or treated water from a dedicated water treatment system.
Water Inlet: The water inlet is the entry point where water enters the compressor’s lubrication system. It may include valves, filters, or other components to regulate and control the water flow.

Lubrication System:

Water Jackets: Water jackets are channels or passages built into the compressor’s housing or cylinder walls. These jackets allow water to circulate and come into direct contact with the compressor’s moving parts, providing lubrication and cooling. The water jackets help dissipate heat generated during compression and prevent excessive temperatures that could damage the compressor.
Water Pump: The water pump is responsible for circulating water through the water jackets and the entire lubrication system. It provides the necessary pressure to ensure adequate water flow and distribution to the compressor’s components.
Flow Control Devices: Flow control devices, such as valves or flow restrictors, are often included in the water-lubrication system to regulate and control the water flow rate. These devices help maintain optimal water pressure and flow throughout the system, ensuring effective lubrication and cooling.
Water Filters: Water filters are used to remove impurities, sediment, or debris from the water before it enters the lubrication system. They help prevent blockages, protect the compressor’s components from damage, and maintain the quality of the water used for lubrication.
Water Separator: A water separator is a component that removes excess water, moisture, or condensate from the compressed air. It ensures that the compressed air leaving the compressor is dry and free from excess water content, preventing potential issues such as corrosion or contamination downstream.

Control and Monitoring:

Temperature Sensors: Temperature sensors are used to monitor the temperature of the water and the compressor components. They provide feedback to the control system, allowing for adjustments in water flow or cooling measures if required to maintain optimal operating conditions.
Pressure Sensors: Pressure sensors are employed to monitor the water pressure within the lubrication system. They help ensure that the water flow and pressure are within the desired range, allowing for proper lubrication and cooling of the compressor.
Control System: A control system, which may include a combination of sensors, valves, and controllers, is responsible for regulating and maintaining the operation of the water-lubrication system. It can monitor various parameters, such as temperature, pressure, and flow, and make adjustments as needed to ensure efficient and safe operation.

air compressor

Are There Regulations Governing the Use of Water-Lubricated Air Compressors?

1. Occupational Safety and Health Administration (OSHA) Regulations:

2. Environmental Protection Agency (EPA) Regulations:

3. International Organization for Standardization (ISO) Standards:

4. Manufacturer Guidelines and Recommendations:

air compressor

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Water-lubricated air compressors can be highly suitable for the food and beverage industries due to several reasons:

Food-grade lubrication: Water is a natural and food-grade lubricant. It does not introduce harmful contaminants or chemicals into the production process, ensuring the safety and quality of food and beverage products. Water lubrication eliminates the risk of oil contamination in food products that can occur with oil-lubricated compressors.
Compliance with hygiene standards: The food and beverage industries have strict hygiene standards and regulations. Water-lubricated air compressors align with these standards as water is a clean and sanitary lubricant. It minimizes the risk of cross-contamination and helps maintain a hygienic production environment.
Reduced risk of product contamination: Water lubrication eliminates the possibility of oil carryover or oil vapor entering the compressed air system. This reduces the risk of oil contamination in food and beverage products, ensuring their purity and quality.
Improved product shelf life: Oil-lubricated compressors can release oil aerosols or vapors that may negatively affect the taste, odor, or quality of food and beverage products. Water-lubricated compressors eliminate this concern, contributing to improved product shelf life and maintaining the desired sensory attributes.
Easy cleanup and maintenance: Water lubrication simplifies cleanup and maintenance procedures in food and beverage production facilities. Water does not leave behind sticky residues or require extensive cleaning processes. It facilitates faster and more efficient cleaning, reducing downtime and improving overall productivity.
Environmental friendliness: Water is a sustainable and environmentally friendly lubricant choice. It is non-toxic, biodegradable, and does not contribute to air or water pollution. Using water-lubricated air compressors aligns with the sustainability goals of the food and beverage industries.

China high quality Portable 550W Silent 8 Bar Oil Free Piston Air Compressor for Painting/Home Decoration/Laboratory with high quality
editor by CX 2023-11-08

China supplier Industrial Stationary Similar CHINAMFG Rand CHINAMFG 7 8 10 Bar Medical Oil Free Electric Direct Driven Pmsm Pm VSD Rotary Screw Type Air Compressor air compressor oil

Product Description

Germany Technology Industrial Silent Oil-free Electrical Rotary Oil Free Screw Air Compressor

Water-lubricated Oil-free Screw Air Compressor Advantages

Water lubricated oil free compressor-technical parameters:

Model	Work pressure	Capacity	Power	Noise	Inlet and outlet diameters of cooling water	Water inlet & outlet T/H	Lubricating water L	Dimensions	Weight	Air outlet diameter
WZS-06PMA	8.5	0.3~0.78	5.5	57	3/4″	1.5	10	800x800x1100	460	3/4″
	10.5	0.2~0.65
WZS-08PMA	8.5	0.35~1.17	7.5	57	3/4″	2	10	800x800x1100	510	3/4″
	10.5	0.3~1.05
	12.5	0.24~0.81
WZS-11PMA	8.5	0.54~1.72	11	60	1″	2.5	26	1200x800x1300	620	3/4″
	10.5	0.45~1.42
	12.5	0.35~1.10
WZS-15PMA	8.5	0.75~2.43	15	60	1″	3.5	26	1200x800x1300	670	1″
	10.5	0.65~2.17
	12.5	0.6~1.85
WZS-18PMA	8.5	0.9~3.13	18.5	63	1″	4	30	1400x1000x1520	730	1″
	10.5	0.9~2.82
	12.5	0.6~2.05
WZS-22PMA	8.5	1.1~3.62	22	63	1 1/2″	5	30	1400x1000x1520	780	1″
	10.5	0.97~3.21
	12.5	0.85~2.78
WZS-30PMA	8.5	1.55~5.12	30	66	1 1/2″	7	40	1500x1150x1500	1150	1 1/2″
	10.5	1.255~4.43
	12.5	1.1~3.63
WZS-37PMA	8.5	1.91~6.30	37	66	1 1/2″	9	40	1500x1150x1500	1200	1 1/2″
	10.5	1.60~5.33
	12.5	1.42~4.77
WZS-45PMA	8.5	2.50~8.30	45	68	1 1/2″	10	90	1800x1300x1750	1490	2″
	10.5	1.91~6.30
	12.5	1.70~5.56
WZS-55PMA	8.5	3.0~9.76	55	69	1 1/2″	12	100	1800x1300x1750	1570	2″
	10.5	2.60~8.55
	12.5	2.30~7.67
WZS-75PMA	8.5	3.95~13.00	75	72	1 1/2″	18	100	1800x1300x1750	1750	2″
	10.5	3.40~11.50
	12.5	3.0~9.70
WZS-90PMA	8.5	5.0~16.60	90	73	1 1/2″	20	120	2200x1550x1800	2450	2 1/2″
	10.5	4.30~14.66
	12.5	3.72~12.60
WZS-110PMA	8.5	6.0~19.97	110	77	1 1/2″	24	120	2200x1550x1800	2580	2 1/2″
	10.5	5.0~16.66
	12.5	4.65~15.56
WZS-132PMA	8.5	6.75~22.52	132	77	2″	30	120	2200x1550x1800	2700	2 1/2″
	10.5	6.0~19.97
	12.5	5.07~16.90
WZS-160PMA	8.5	8.5~28.11	160	79	3″	35	160	3000x1800x2100	3900	3″
	10.5	706~25.45
	12.5	6.7~22.52
WZS-185PMA	8.5	10~33.97	185	79	3″	38	160	3000x1800x2100	4050	3″
	10.5	8.72~29.00
	12.5	7075~25.210
WZS-200PMA	8.5	11.2~36.75	200	80	4″	42	200	3100x1850x2100	4200	4″
	10.5	9.68~32.78
	12.5	9.2~29.24
WZS-220PMA	8.5	12.2~39.67	220	80	4″	47	200	3100x1850x2100	4400	4″
	10.5	11.2~36.75
	12.5	9.0~29.63
WZS-250PMA	8.5	13.5~44.78	250	80	4″	53	200	3100x1850x2100	4800	4″
	10.5	12.3~39.67
	12.5	10.2~33.97

Wan CHINAMFG Certification

Wan CHINAMFG Exhibition

FAQ

1. OEM/ODM, or customer’ s logo printed is available?

Yes, OEM/ODM, customer’s logo is welcomed.

2. Delivery date?
Usually 5-25 working days after receiving deposit, specific delivery date based on order quantity.

3. What’s your payment terms?

Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, other payment terms also can be discussed based on our cooperation.

4. How to control your quality?

We have professional QC team, control the quality during the mass production and inspect the products before shipping.

5. If we don’ t have shipping forwarder in China , would you do this for us?

We can offer you best shipping line to ensure you can get the goods timely at best price.

6. I never come to China before , can you be my guide in China?

Sure , I’m glad to be your guide because our company directly located in ZheJiang , where is the most famous city in China, if you want to come China then we are happy to provide you one-stop service, such as booking ticket, picking up at the airport, booking hotel, accompany visiting factory. It gonna make you an unforgettable memory.

MARKETING NETWORK

After-sales Service:	24/7 Service Support
Warranty:	Unit 1 Year, Air End 2 Years
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

How Do You Ensure Proper Water Lubrication in Air Compressors?

Proper water lubrication in air compressors is essential for maintaining their performance, efficiency, and longevity. Here’s a detailed explanation of how to ensure proper water lubrication:

Use High-Quality Water: Start by using high-quality water for lubrication. Ideally, the water should be clean, free from impurities, and have the appropriate chemical composition. Impurities or contaminants in the water can lead to increased wear, corrosion, and blockages in the compressor. Water treatment or filtration systems may be necessary to ensure the desired water quality.
Monitor Water Supply: Ensure a consistent and adequate water supply to the compressor. Monitor the flow rate and pressure of the water supply to ensure it meets the requirements of the compressor’s lubrication system. Insufficient water flow can lead to inadequate lubrication, increased friction, and potential damage to the compressor components.
Implement Proper Water Cooling: Compressed air generates heat during the compression process, and effective cooling is crucial to maintain safe operating temperatures and proper water lubrication. Ensure that the cooling mechanisms, such as water jackets or external cooling systems, are properly designed and sized to provide adequate cooling capacity. Monitor and control the water temperature to prevent overheating and ensure optimal lubrication.
Optimize Water Distribution: Proper water distribution within the compressor is essential for effective lubrication. Ensure that the water is evenly distributed to all the necessary lubrication points, such as the bearings or other moving parts. Proper design and installation of water distribution systems, including pipes, fittings, and nozzles, are important to achieve uniform water distribution and prevent any dry spots or inadequate lubrication.
Regular Maintenance: Implement a regular maintenance schedule for the water lubrication system. This includes periodic inspection and cleaning of water filters, strainers, or screens to prevent clogging and maintain proper water flow. Check for any leaks or malfunctions in the water distribution system and promptly address them. Regularly monitor water quality and perform any necessary water treatment or filtration to maintain optimal lubrication conditions.
Follow Manufacturer Guidelines: Always follow the manufacturer’s guidelines and recommendations for water lubrication. Manufacturers provide specific instructions regarding water quality, flow rates, cooling requirements, and maintenance procedures for their compressors. Adhering to these guidelines ensures that the compressor operates within its intended parameters and maintains proper water lubrication.

air compressor

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Filtration plays a crucial role in water-lubricated air compressors, serving several important purposes. Here’s a detailed explanation of the role of filtration in water-lubricated air compressors:

Contaminant Removal:

Particle Filtration: Filtration systems in water-lubricated air compressors are designed to remove particles and contaminants from the water. These can include sediment, rust, debris, and other solid particles that may be present in the water supply. Removing these contaminants is essential to prevent blockages, clogging, and damage to the compressor components.
Oil Removal: In some cases, water used in compressors may contain traces of oil or hydrocarbons. Filtration systems can also help remove oil and hydrocarbon contaminants from the water, ensuring that the lubrication system remains clean and effective.

Protection of Components:

Lubrication System: Filtration prevents contaminants from reaching the lubrication system of water-lubricated air compressors. This helps maintain the cleanliness and integrity of the lubricant, ensuring optimal lubrication performance and minimizing wear on the compressor’s moving parts. Clean and filtered water can enhance the efficiency and lifespan of the compressor’s lubrication system.
Heat Exchangers and Cooling Systems: Water-lubricated compressors often rely on heat exchangers and cooling systems to regulate the temperature of the compressed air and the compressor itself. Filtration helps protect these components by preventing the accumulation of debris and contaminants that can hinder heat transfer and reduce the cooling efficiency. Clean water free from particles and contaminants promotes effective heat exchange and cooling.

Prevention of System Fouling:

Scaling and Deposits: Filtration systems also help prevent scaling and deposits that can occur when water with high mineral content or hardness is used. These deposits can accumulate on the internal surfaces of the compressor, heat exchangers, or other components, reducing their efficiency and potentially causing operational issues. By removing impurities and controlling mineral content, filtration minimizes the risk of scaling and deposits.

Extended Equipment Lifespan:

Component Protection: By effectively removing contaminants, filtration systems contribute to the protection and longevity of water-lubricated air compressor components. Clean and filtered water reduces the risk of component wear, corrosion, fouling, and blockages, ultimately extending the lifespan of the compressor and reducing maintenance and replacement costs.

Regular Maintenance and Monitoring:

Filter Replacement: Filtration systems require regular maintenance, including the replacement or cleaning of filters. The frequency of filter replacement depends on factors such as water quality, usage conditions, and the specific requirements of the compressor manufacturer. Regular maintenance ensures that the filtration system continues to effectively remove contaminants and protect the compressor components.
Monitoring Water Quality: Alongside filtration, monitoring the quality of the water used in water-lubricated compressors is essential. This can involve periodic water analysis, measurement of key parameters such as pH or conductivity, and visual inspections. Monitoring helps identify any changes in water quality or potential issues with the filtration system, allowing for timely maintenance or corrective actions.

air compressor

Can Water-Lubricated Air Compressors Be Used in Medical Applications?

Water-lubricated air compressors can be used in certain medical applications, offering specific advantages for these environments. Here are some considerations regarding the use of water-lubricated air compressors in medical settings:

Clean and sterile lubrication: Water is a clean and sterile lubricant, making it suitable for medical applications where maintaining a sterile environment is crucial. Water lubrication helps prevent contamination and ensures the integrity of medical products and procedures.
Reduced risk of oil contamination: Oil-lubricated compressors pose a risk of oil carryover and oil vapor entering the compressed air system. This can be problematic in medical applications, where oil contamination could impact patient safety or interfere with sensitive medical equipment. Water-lubricated compressors eliminate this risk, providing a reliable and oil-free compressed air source.
Compatibility with medical gases: Water-lubricated air compressors are compatible with medical gases such as oxygen or nitrous oxide. Unlike oil lubricants, water does not react or contaminate these gases, ensuring their purity and safety in medical procedures.
Hygienic and easy to clean: Water lubrication simplifies cleaning procedures in medical environments. It does not leave behind sticky residues or require harsh chemicals for cleaning. Water-lubricated compressors can be easily cleaned and maintained, promoting a hygienic and safe medical facility.
Reduced risk of fire hazards: Water has a higher flash point compared to oil lubricants, making water-lubricated compressors safer in terms of fire hazards. In medical settings, where fire safety is critical, using water as a lubricant can provide added peace of mind.
Environmental friendliness: Water is a non-toxic and environmentally friendly lubricant choice. It does not contribute to air or water pollution, aligning with the sustainability goals of medical facilities.

While water-lubricated air compressors offer several advantages for medical applications, it’s important to note that specific requirements and regulations may vary depending on the type of medical procedure or equipment involved. It is advisable to consult with medical professionals or equipment manufacturers to ensure the suitability and compliance of water-lubricated air compressors for specific medical applications.

China supplier Industrial Stationary Similar CHINAMFG Rand CHINAMFG 7 8 10 Bar Medical Oil Free Electric Direct Driven Pmsm Pm VSD Rotary Screw Type Air Compressor air compressor oil
editor by CX 2023-11-07

China OEM Industrial Stationary Similar CHINAMFG Rand Clean Class 0 Silent 7 8 10 Bar Medical Oil Free Electric Direct Driven Pm VSD Rotary Screw Type Air Compressor with Good quality

Product Description

Germany Technology Industrial Silent Oil-free Electrical Rotary Oil Free Screw Air Compressor

Water lubricated oil free compressor-technical parameters:

Model	Work pressure	Capacity	Power	Noise	Inlet and outlet diameters of cooling water	Water inlet & outlet T/H	Lubricating water L	Dimensions	Weight	Air outlet diameter
WZS-06PMA	8.5	0.3~0.78	5.5	57	3/4″	1.5	10	800x800x1100	460	3/4″
	10.5	0.2~0.65
WZS-08PMA	8.5	0.35~1.17	7.5	57	3/4″	2	10	800x800x1100	510	3/4″
	10.5	0.3~1.05
	12.5	0.24~0.81
WZS-11PMA	8.5	0.54~1.72	11	60	1″	2.5	26	1200x800x1300	620	3/4″
	10.5	0.45~1.42
	12.5	0.35~1.10
WZS-15PMA	8.5	0.75~2.43	15	60	1″	3.5	26	1200x800x1300	670	1″
	10.5	0.65~2.17
	12.5	0.6~1.85
WZS-18PMA	8.5	0.9~3.13	18.5	63	1″	4	30	1400x1000x1520	730	1″
	10.5	0.9~2.82
	12.5	0.6~2.05
WZS-22PMA	8.5	1.1~3.62	22	63	1 1/2″	5	30	1400x1000x1520	780	1″
	10.5	0.97~3.21
	12.5	0.85~2.78
WZS-30PMA	8.5	1.55~5.12	30	66	1 1/2″	7	40	1500x1150x1500	1150	1 1/2″
	10.5	1.255~4.43
	12.5	1.1~3.63
WZS-37PMA	8.5	1.91~6.30	37	66	1 1/2″	9	40	1500x1150x1500	1200	1 1/2″
	10.5	1.60~5.33
	12.5	1.42~4.77
WZS-45PMA	8.5	2.50~8.30	45	68	1 1/2″	10	90	1800x1300x1750	1490	2″
	10.5	1.91~6.30
	12.5	1.70~5.56
WZS-55PMA	8.5	3.0~9.76	55	69	1 1/2″	12	100	1800x1300x1750	1570	2″
	10.5	2.60~8.55
	12.5	2.30~7.67
WZS-75PMA	8.5	3.95~13.00	75	72	1 1/2″	18	100	1800x1300x1750	1750	2″
	10.5	3.40~11.50
	12.5	3.0~9.70
WZS-90PMA	8.5	5.0~16.60	90	73	1 1/2″	20	120	2200x1550x1800	2450	2 1/2″
	10.5	4.30~14.66
	12.5	3.72~12.60
WZS-110PMA	8.5	6.0~19.97	110	77	1 1/2″	24	120	2200x1550x1800	2580	2 1/2″
	10.5	5.0~16.66
	12.5	4.65~15.56
WZS-132PMA	8.5	6.75~22.52	132	77	2″	30	120	2200x1550x1800	2700	2 1/2″
	10.5	6.0~19.97
	12.5	5.07~16.90
WZS-160PMA	8.5	8.5~28.11	160	79	3″	35	160	3000x1800x2100	3900	3″
	10.5	706~25.45
	12.5	6.7~22.52
WZS-185PMA	8.5	10~33.97	185	79	3″	38	160	3000x1800x2100	4050	3″
	10.5	8.72~29.00
	12.5	7075~25.210
WZS-200PMA	8.5	11.2~36.75	200	80	4″	42	200	3100x1850x2100	4200	4″
	10.5	9.68~32.78
	12.5	9.2~29.24
WZS-220PMA	8.5	12.2~39.67	220	80	4″	47	200	3100x1850x2100	4400	4″
	10.5	11.2~36.75
	12.5	9.0~29.63
WZS-250PMA	8.5	13.5~44.78	250	80	4″	53	200	3100x1850x2100	4800	4″
	10.5	12.3~39.67
	12.5	10.2~33.97

Before quotation:
1.Before quoting, what should users offer?
1).Discharge pressure (Bar, Mpa or Psi)
2).Air discharge/Air flow/Air capacity (m3/min or CFM)
3).Power supply (220/380V, 50/60Hz, 3Phase)

2.If I don’t know the pressure and air flow, what should I do?
1).Take the picture of nameplate, we will advise the suitable air compressor to you.
2).Tell us what industry you are, we can advise the suitable 1 (so as to air tank / air dryer / air filters).

SHIPPING
Delivery: time 5-25 working days after payment receipt confirmed(based on actual quantity)
packing:standard export packing. or customized packing as your
Professional: goods shipping forwarder.

FAQ
Q: OEM/ODM, or customers logo printed is available?
Yes, OEM/ODM, customers logo is welcomed.

Q: Delivery date?
Usually 5-25 workdays after receiving deposit, specific delivery date based on order quantity

Q: what’s your payment terms?
Regularly doing 30% deposit and 70% balance by T/T, Western Union, Paypal, otherpayment terms also can be discussed based on our cooperation.

Q: How to control your quality?
We have professional QC team, control the quality during the mass production and inspectthe completely goods before shipping.

Q: If we don’t have shipping forwarder in China, would you do this for us?
We can offer you best shipping line to ensure you can get the goods timely at best price.

Q: come to China before, can you be my guide in China?
We are happy to provide you orservice, such as booking ticket, pick up at the airport, booking hotel, accompany visiting market or factory

Thank you very much for viewing this page, and wish you a nice day!

Warranty:	Unit 1 Year, Air End 2 Years
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type

Customization:	Available \|

air compressor

Can Water-Lubricated Air Compressors Be Used in Cold Climates?

Freezing of Water:

Potential for Freezing: In cold climates, the water used for lubrication in water-lubricated compressors can freeze, which can cause operational issues and damage to the equipment. Freezing can occur in the water supply lines, lubrication system, or water jackets if the temperature drops below the freezing point of water.
Water Temperature: It is important to ensure that the water temperature remains above freezing throughout the compressor system. This can be achieved by using insulation, heat tracing, or heaters to maintain adequate water temperature. Monitoring the water temperature and implementing appropriate heating measures are crucial to prevent freezing-related problems.

Protection and Insulation:

Protecting External Components: External components of water-lubricated compressors, such as valves, fittings, and pipes, may be exposed to cold temperatures. Insulating these components can help prevent freezing and ensure their proper functioning. Insulation materials, such as foam wraps or heat tapes, can be used to provide thermal protection.
Water Supply Lines: Water supply lines that feed the compressor should be properly insulated and protected from freezing temperatures. Insulation can help maintain the water temperature and prevent freezing within the supply lines. Additionally, measures such as burying the supply lines below the frost line or using heat tracing cables can offer further protection against freezing.

Alternative Lubrication Methods:

Oil-Lubricated Compressors: In extremely cold climates, where freezing is a significant concern, using oil-lubricated compressors instead of water-lubricated ones may be a more practical option. Oil-based lubrication systems are less prone to freezing and can provide reliable operation in colder temperatures. However, it is important to consider the specific requirements and limitations of oil-lubricated compressors for the intended application.

Manufacturer Recommendations:

Consulting the Manufacturer: It is crucial to consult the manufacturer’s guidelines and recommendations regarding the use of water-lubricated compressors in cold climates. Manufacturers may provide specific instructions, modifications, or alternative solutions to ensure the safe and efficient operation of their equipment under cold weather conditions.

air compressor

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Filtration plays a crucial role in water-lubricated air compressors, serving several important purposes. Here’s a detailed explanation of the role of filtration in water-lubricated air compressors:

Contaminant Removal:

Particle Filtration: Filtration systems in water-lubricated air compressors are designed to remove particles and contaminants from the water. These can include sediment, rust, debris, and other solid particles that may be present in the water supply. Removing these contaminants is essential to prevent blockages, clogging, and damage to the compressor components.
Oil Removal: In some cases, water used in compressors may contain traces of oil or hydrocarbons. Filtration systems can also help remove oil and hydrocarbon contaminants from the water, ensuring that the lubrication system remains clean and effective.

Protection of Components:

Lubrication System: Filtration prevents contaminants from reaching the lubrication system of water-lubricated air compressors. This helps maintain the cleanliness and integrity of the lubricant, ensuring optimal lubrication performance and minimizing wear on the compressor’s moving parts. Clean and filtered water can enhance the efficiency and lifespan of the compressor’s lubrication system.
Heat Exchangers and Cooling Systems: Water-lubricated compressors often rely on heat exchangers and cooling systems to regulate the temperature of the compressed air and the compressor itself. Filtration helps protect these components by preventing the accumulation of debris and contaminants that can hinder heat transfer and reduce the cooling efficiency. Clean water free from particles and contaminants promotes effective heat exchange and cooling.

Prevention of System Fouling:

Scaling and Deposits: Filtration systems also help prevent scaling and deposits that can occur when water with high mineral content or hardness is used. These deposits can accumulate on the internal surfaces of the compressor, heat exchangers, or other components, reducing their efficiency and potentially causing operational issues. By removing impurities and controlling mineral content, filtration minimizes the risk of scaling and deposits.

Extended Equipment Lifespan:

Component Protection: By effectively removing contaminants, filtration systems contribute to the protection and longevity of water-lubricated air compressor components. Clean and filtered water reduces the risk of component wear, corrosion, fouling, and blockages, ultimately extending the lifespan of the compressor and reducing maintenance and replacement costs.

Regular Maintenance and Monitoring:

Filter Replacement: Filtration systems require regular maintenance, including the replacement or cleaning of filters. The frequency of filter replacement depends on factors such as water quality, usage conditions, and the specific requirements of the compressor manufacturer. Regular maintenance ensures that the filtration system continues to effectively remove contaminants and protect the compressor components.
Monitoring Water Quality: Alongside filtration, monitoring the quality of the water used in water-lubricated compressors is essential. This can involve periodic water analysis, measurement of key parameters such as pH or conductivity, and visual inspections. Monitoring helps identify any changes in water quality or potential issues with the filtration system, allowing for timely maintenance or corrective actions.

air compressor

Are Water Lubrication Air Compressors More Environmentally Friendly?

Water lubrication in air compressors offers several environmental benefits compared to traditional lubrication methods. Here are some reasons why water lubrication is considered more environmentally friendly:

Non-toxic and biodegradable: Water is a natural substance that is non-toxic and biodegradable. It does not contain harmful chemicals or additives that can pollute the air or water systems. When water lubricants are used in air compressors, there is a reduced risk of environmental contamination.
Reduced air pollution: Traditional lubricants, such as oils or synthetic lubricants, can release volatile organic compounds (VOCs) into the air during operation. VOCs contribute to air pollution and can have detrimental effects on human health and the environment. Water lubrication eliminates the release of VOCs, resulting in improved air quality and reduced air pollution.
Minimized water pollution: Water lubrication does not introduce additional pollutants into water systems. Unlike oils or synthetic lubricants, water does not leave behind harmful residues or contaminants that can contaminate water sources. This helps to protect aquatic ecosystems and maintain water quality.
Energy efficiency: Water lubrication can contribute to energy efficiency in air compressors. Water has excellent heat transfer properties, allowing for efficient dissipation of heat generated during compressor operation. By effectively managing heat, water lubrication helps to reduce energy consumption and improve overall compressor efficiency.
Sustainable resource: Water is a renewable resource that is readily available in nature. Unlike oil or synthetic lubricants, which require extraction and processing, water can be sourced sustainably. This reduces the reliance on finite resources and promotes a more sustainable approach to lubrication in air compressors.

Overall, water lubrication in air compressors is considered more environmentally friendly due to its non-toxic nature, reduced air and water pollution, energy efficiency, and sustainable resource usage.

China OEM Industrial Stationary Similar CHINAMFG Rand Clean Class 0 Silent 7 8 10 Bar Medical Oil Free Electric Direct Driven Pm VSD Rotary Screw Type Air Compressor with Good quality
editor by CX 2023-10-24

Product Description

How are air compressors utilized in pharmaceutical manufacturing?

Can air compressors be used for inflating tires and sporting equipment?

What is the purpose of an air compressor?

Product Description

How Do You Ensure Proper Water Lubrication in Air Compressors?

What Are the Considerations for Choosing Water-Lubricated vs. Oil-Lubricated Compressors?

What Maintenance Is Required for Water-Lubricated Air Compressors?

Product Description

DENAIR Services DENAIR Oil Free Screw Air Compressor Application and Installation FAQ

Can Water-Lubricated Air Compressors Be Used in Cold Climates?

Are There Regulations Governing the Use of Water-Lubricated Air Compressors?

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Product Description

What Are the Key Components of a Water-Lubrication System in Compressors?

Are There Any Potential Water-Related Issues with These Compressors?

Are There Any Downsides to Using Water-Lubricated Air Compressors?

Product Description

What Industries Commonly Use Water-Lubricated Air Compressors?

How Do You Troubleshoot Common Problems with Water-Lubrication Systems?

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Product Description

What we can supply:

Can Water-Lubricated Compressors Be Used in High-Pressure Applications?

What Is the Role of Filtration in Water-Lubricated Air Compressors?

What Maintenance Is Required for Water-Lubricated Air Compressors?

Product Description

What is the impact of humidity on compressed air quality?

Can air compressors be used for inflating tires and sporting equipment?

What is the role of air compressor tanks?

Product Description

What Are the Key Components of a Water-Lubrication System in Compressors?

Are There Regulations Governing the Use of Water-Lubricated Air Compressors?

Are Water-Lubricated Air Compressors Suitable for Food and Beverage Industries?

Product Description

How Do You Ensure Proper Water Lubrication in Air Compressors?

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Can Water-Lubricated Air Compressors Be Used in Medical Applications?

Product Description

Can Water-Lubricated Air Compressors Be Used in Cold Climates?

What Is the Role of Filtration in Water-Lubricated Air Compressors?

Are Water Lubrication Air Compressors More Environmentally Friendly?

DENAIR Services

DENAIR Oil Free Screw Air Compressor Application and Installation

FAQ