Product Description
3000psig High Pressure Oil Free Air Oxygen Gas Diaphragm Piston Compressor
As the leading Oil-free Medical Oxygen Booster manufacturer in China, Medical Oxygen Booster is an important product for us.
Advantage
Oil-Free
Our Medical Oxygen Booster is completely oil-free and does not use any lubricating oil. The cylinder is made of stainless steel with oil-free design. The guide ring, piston ring and piston rod packing are all made of self-lubricating material, with 100% oil-free lubrication. All this assures that oxygen is clean and pollution-free. High temperature resistant grease lubrication is adopted for bearing parts, which will not contact with compression medium, avoid gas pollution during compression process, to ensure gas purity. It was controlled by the microcomputer controller, it has the functions of high exhaust temperature, low intake pressure and high exhaust pressure with alarm shutdown, high automation level, and more reliable operation.
Working Speed
Our Medical Oxygen Booster working speed is very slow, usually 200-400rpm, which is suitable for 24 hours of continuous working conditions.
Selection
We can configure data remote display and remote control according to customer’s requirement.
Our Medical Oxygen Booster can be used in hospital oxygen centers to increase the pressure of oxygen lines in rooms, and to boost oxygen and fill cylinders. It can also be used for industrial acetylene combustion cutting, waste steel cutting in steel works, supporting boiler oxygen combustion, and circulating the steam oxygen in low temperature liquid oxygen tank to the tank for various working conditions.
Type
According to the customer’s oxygen usage, Our Medical Oxygen Booster are divided into 5 types according to the cylinders form:
♣ Level-1 compression, single cylinder
♣ Level-2 compression, double cylinder
♣ Level-3 compression, triplex cylinder
♣ Level-4 compression, 4 cylinder
♣ Level-5 compression, vertical style
Pressure Range
Oil-free low pressure Medical Oxygen Booster, could be used in industrial boiler combustion support, hospital centralized oxygen supply booster, and other fields. The pressure ranging is from 0.2~3bar to 10bar-15barg.
Application
Oil-free high pressure Medical Oxygen Booster, could be used for high pressure oxygen bottle filling, so as to facilitate the oxygen storage and transport. According to the customers’ demand, the filling pressure is divided into 15mpa, 20mpa, and up to 30mpa. The filling is flow from 1Nm3/h to 300Nm3/h, especially suitable for the filling of PSA oxygen generator. It has characteristics of clean, totally oil-free, simple operation, reliable quality, low speed, and low noise. The Medical Oxygen Booster could be working in continuous working conditions for a long time, which is the best choice of oxygen compressor.
Cooling Way
Medical Oxygen Booster, according to the cooling way, can be divided into air cooled and water cooled, customers can choose from it according to the actual local situation.
| 200bar/3000psi W-type Oil Free Oxygen compressor Booster | |||||||
| Model | Flow Rate Nm3/h |
Intel Pressure MPa |
Discharge Pressure MPa |
Power Rate KW |
Dimension mm |
Inlet/Outlet mm |
Cooling Type |
| WWZ-(3~5)/4-150 | 3~5 | 0.4 | 15 | 4 | 1080X820X850 | 20,10 | Air |
| WWZ-(6~8)/4-150 | 6~8 | 0.4 | 15 | 5.5 | 1080X870X850 | 25,10 | Air |
| WWZ-(9~12)/4-150 | 9~12 | 0.4 | 15 | 7.5 | 1080X900X850 | 25,10 | Air |
| WWZ-(13~17)/4-150 | 13~17 | 0.4 | 15 | 11 | 1250X1571X850 | 25,10 | Air |
| WWZ-(18~20)/4-150 | 18~20 | 0.4 | 15 | 15 | 1250X1571X850 | 25,10 | Air |
| WWZ-(21~25)/4-150 | 21~25 | 0.4 | 15 | 15 | 1250X1571X850 | 32,12 | Air |
| WWZ-(16~20)/4-150 * | 16~20 | 0.4 | 15 | 7.5 | 1300X1571X900 | 32,12 | Air /Water |
| WWZ-(21~27)/4-150 * | 21~27 | 0.4 | 15 | 11 | 1350X1571X900 | 32,12 | Air /Water |
| WWZ-(28~50)/4-150 * | 28~50 | 0.4 | 15 | 15 | 1600X1100X1100 | 32,16 | Water |
| SWZ-(51~65)/4-150 * | 51~65 | 0.4 | 15 | 22 | 1800x1100X1200 | 51,18 | Water |
| WWZ-(66~100)/4-150-II * | 66~100 | 0.4 | 15 | 15×2 | 2100X1650X1200 | 51,18 | Water |
| SWZ-(20~30)/0-150 * | 20~30 | 0 | 15 | 15 | 1800x1100X1200 | 32,16 | Water |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Oversea Service Available |
|---|---|
| Warranty: | 36months |
| Lubrication Style: | Oil-free |
| Cooling System: | Water Cooling |
| Cylinder Arrangement: | Balanced Opposed Arrangement |
| Cylinder Position: | Vertical |
| Samples: |
US$ 18200/Set
1 Set(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
Are There Specific Water Treatment Requirements for Water-Lubricated Compressors?
Water-lubricated compressors often have specific water treatment requirements to ensure optimal performance, prevent equipment damage, and maintain the desired water quality. Here’s a detailed explanation of the water treatment considerations for water-lubricated compressors:
Water Quality:
- Purity: The water used for lubrication should be clean and free from impurities, contaminants, or excessive minerals. Impurities in the water can lead to corrosion, blockages, and reduced lubrication effectiveness. Water sources should be evaluated to ensure they meet the required purity standards.
- Chemical Composition: The chemical composition of the water should be within acceptable limits to avoid any adverse reactions with compressor components or lubricants. Certain water characteristics, such as pH, alkalinity, hardness, and conductivity, need to be monitored and controlled to prevent issues like scaling, fouling, or chemical reactions.
Water Treatment Methods:
- Filtration: Filtration systems are commonly used to remove particulate matter, sediment, or debris from the water. Filters can range from simple strainers to more advanced filtration systems, depending on the specific water quality requirements and the level of filtration needed.
- Water Softening: If the water has high levels of hardness minerals, such as calcium and magnesium, water softening methods may be necessary. Water softeners use ion exchange or other processes to remove the hardness minerals, which can help prevent scaling and reduce the risk of deposits in the compressor system.
- Reverse Osmosis (RO): Reverse osmosis is a water treatment method that uses a semi-permeable membrane to remove dissolved solids, ions, and impurities from the water. RO systems can effectively reduce the total dissolved solids (TDS) and improve the overall water quality, making it suitable for water-lubricated compressors.
- Chemical Treatment: In some cases, chemical treatments may be required to control water chemistry parameters, such as pH or alkalinity. Chemical additives can be used to adjust or stabilize water chemistry within the desired range, preventing corrosion, scaling, or other issues.
Water treatment requirements for water-lubricated compressors can vary depending on factors such as the compressor design, operating conditions, water source quality, and specific application requirements. It is essential to consult the compressor manufacturer’s recommendations and guidelines regarding water treatment. The manufacturer’s guidelines will provide specific information on water quality limits, treatment methods, and any required maintenance procedures related to water treatment.
Regular monitoring of water quality, including periodic testing and analysis, is recommended to ensure that the water treatment measures are effective and the desired water quality is maintained. Water treatment systems should be properly maintained and periodically serviced to ensure their optimal performance and prevent any potential issues that could affect the operation and longevity of water-lubricated compressors.
.webp)
How Does Water-Lubrication Affect the Lifespan of Air Compressor Components?
Water-lubrication can have both positive and negative effects on the lifespan of air compressor components. Here’s a detailed explanation of how water-lubrication can impact the lifespan of air compressor components:
Positive Effects:
- Lubrication: Water-lubrication provides effective lubrication to the moving parts of the air compressor, reducing friction and wear. Proper lubrication helps minimize the stress on components such as pistons, cylinders, and bearings, which can contribute to extended component lifespan.
- Cooling: Water-lubricated systems offer efficient cooling properties. The circulation of water through water jackets or cooling channels helps dissipate heat generated during compression. Effective cooling can prevent excessive temperature rise, reducing the risk of thermal damage and prolonging the lifespan of compressor components.
- Contaminant Control: Water-lubrication can aid in controlling contaminants within the compressor system. Water acts as a medium to trap and remove particulate matter or debris generated during compressor operation. This helps protect components from potential damage and contributes to their longevity.
Negative Effects:
- Corrosion: Water-lubrication introduces moisture into the compressor system, which can increase the risk of corrosion. Corrosion can degrade the integrity of components, leading to reduced lifespan and potential failures. Proper corrosion prevention measures, such as using corrosion-resistant materials or implementing water treatment processes, are essential to mitigate this negative effect.
- Contamination: Although water-lubrication can help control contaminants, it can also introduce impurities and contaminants if the water supply or treatment is not adequately managed. Contaminants such as sediment, minerals, or microbial growth can negatively impact component lifespan by causing blockages, wear, or chemical degradation. Regular maintenance and proper filtration systems are crucial to minimize contamination-related issues.
- System Complexity: Water-lubricated systems can be more complex than oil-lubricated systems, requiring additional components such as water pumps, filters, and separators. The complexity of the system can introduce more points of failure or maintenance requirements, which, if not addressed properly, can affect the overall lifespan of the compressor components.
Proper maintenance, monitoring, and adherence to manufacturer guidelines are essential to maximize the positive effects and mitigate the negative effects of water-lubrication on air compressor components. Regular inspection, cleaning, lubrication, and water treatment can help ensure optimal operation and prolong the lifespan of the compressor components.
.webp)
Advantages of Using Water as a Lubricant in Air Compressors
Water can be used as a lubricant in air compressors, offering several advantages over traditional lubricants such as oils or synthetic lubricants. Here are some of the advantages:
- Cost-effective: Water is a readily available and inexpensive resource, making it a cost-effective lubricant option for air compressors. Compared to oils or synthetic lubricants, water is significantly cheaper, which can result in cost savings for businesses and industries that heavily rely on air compressors.
- Environmentally friendly: Water is a non-toxic and environmentally friendly lubricant. It does not contain harmful chemicals or pollutants that can contribute to air or water pollution. Using water as a lubricant in air compressors reduces the risk of contamination and minimizes the environmental impact associated with traditional lubricants.
- Improved heat dissipation: Water has excellent heat transfer properties. It can absorb and dissipate heat more efficiently compared to oils or synthetic lubricants. Air compressors generate heat during operation, and using water as a lubricant helps to dissipate this heat effectively, preventing overheating and prolonging the lifespan of the compressor.
- Reduced fire hazard: Compared to oils or synthetic lubricants, water has a significantly higher flash point, which means it is less likely to ignite or contribute to fire hazards. This fire-resistant property of water makes it a safer lubricant choice, especially in environments where fire safety is a concern.
- Lower maintenance requirements: Water does not leave behind sticky residues or deposits, as some oils or synthetic lubricants might. This characteristic reduces the maintenance requirements of air compressors. It simplifies the cleaning process and reduces the frequency of lubricant changes, resulting in reduced downtime and maintenance costs.
Overall, using water as a lubricant in air compressors can offer significant advantages in terms of cost-effectiveness, environmental friendliness, heat dissipation, fire safety, and maintenance requirements.
editor by CX 2024-04-02