Product Description

Product Details

Product Features

PM VSD screw air compressor, is a type of screw air compressor that employs permanent magnet synchronous motor (PMSM) and frequency conversion speed control technology.
The main advantages of this screw air compressors are:
Energy saving and high efficiency: Compared with traditional asynchronous motors, permanent magnet inverter motors have higher energy utilization efficiency, and can maintain high power utilization and output power stability under both full load and partial load conditions.

Stable operation: the frequency converter can control a smoother start of the compressor, reduce the impact on the supporting power grid and the mechanical wear and tear of the machine itself, to extend the service life of the equipment.

Low noise: inverter operation can effectively reduce the noise level of the compressor at low load.

Intelligent: Equipped with an intelligent control system, the permanent magnet inverter motor can accurately control the compressor’s working status, distribute the load and achieve more efficient energy use.

Lower maintenance costs: when start-up, frequency conversion air compressor reduces the impact on the power grid and mechanical parts of the equipment, the service life is greatly increased of the compressor’s parts (the motor contactor, motor bearings, host bearings). Energy efficient controller makes the air compressor be in the loading state when at most working time, the relevant solenoid valves and pneumatic components have greatly reduced the number of actions, the failure rate of electrical and mechanical parts is greatly reduced.

Model List

 

Technical Parameters Of PM VSD Screw Air Compressor  -JXPMS Series

This series adopt direct drive mode and variable frequency startup, the standard power supply is 380V/50Hz, and 110V~480V voltage and 60Hz is Optional
 

Model	Pressure (MPa)	Pressure (psi)	FAD (m3/min)	FAD (CFM)	Power  (kW/hp)	Dimension  (mm)	Noise (dB)	Weight (Kg)	Pipe Diameter
JX-10APMS	0.8	116	1.1	38.8	7.5/ 10	800*600*860	≤63±2	112	G1/2
	1	145	0.9	31.8
	1.3	188	0.7	24.7
JX-15APMS	0.8	116	1.7	60.0	11/ 15	1000*750*1070	≤65±2	195	G3/4
	1	145	1.6	56.5
	1.3	188	1	35.3
JX-20APMS	0.8	116	2.3	81.2	15/ 20	1000*750*1070	≤65±2	200	G3/4
	1	145	2.1	74.2
	1.3	188	1.7	60.0
JX-30APMS	0.8	116	3.4	120.1	22/ 30	1100*850*1110	≤72±2	315	G1
	1	145	3.2	113.0
	1.3	188	2.5	88.3
JX-40APMS	0.8	116	4.7	166.0	30/ 40	1100*850*1110	≤75±2	320	G1
	1	145	4	141.2
	1.3	188	3.1	109.5
JX-50APMS	0.8	116	6.4	226.0	37/ 50	1200*1000*1350	≤77±2	450	G1 1/2
	1	145	5.2	183.6
	1.3	188	4.7	166.0
JX-60APMS	0.8	116	7.3	257.8	45/ 60	1200*1000*1350	≤78±2	460	G1 1/2
	1	145	6.6	233.0
	1.3	188	5.5	194.2
JX-75APMS	0.8	116	9.4	331.9	55/ 75	1500*1230*1550	≤80±2	810	G2 1/2
	1	145	7.2	254.2
	1.3	188	6.2	218.9
JX-100APMS	0.8	116	12.3	434.3	75/ 100	1500*1230*1550	≤80±2	820	G2 1/2
	1	145	10.8	381.3
	1.3	188	9.1	321.3
JX-125APMS	0.8	116	15.2	536.7	90/ 125	2100*1400*1650	≤82±2	1650	G2 1/2
	1	145	12.3	434.3
	1.3	188	11.4	402.5
JX-150APMS	0.8	116	19.9	702.7	110/ 150	2250*1510*1850	≤82±2	2300	DN65
	1	145	16.3	575.6
	1.3	188	14.5	512.0
JX-180APMS	0.8	116	23	812.1	132/180	2250*1510*1850	≤82±2	2500	DN65
	1	145	19.7	695.6
	1.3	188	16	565.0
JX-220APMS	0.8	116	28.5	1006.3	160/220	3250*2100*2200	≤84±2	4000	DN100
	1	145	22.8	805.1
	1.3	188	21.5	759.2
JX-250APMS	0.8	116	30	1059.3	185/250	3250*2100*2200	≤84±2	4200	DN100
	1	145	27	953.4
	1.3	188	23	812.1
JX-270APMS	0.8	116	32.5	1147.6	200/270	3550*2300*2300	≤86±2	5300	DN125
	1	145	29.2	1031.1
	1.3	188	25.5	900.4
JX-300APMS	0.8	116	38	1341.8	220/300	3550*2300*2300	≤86±2	5800	DN125
	1	145	33	1165.2
	1.3	188	28.8	1016.9
JX-350APMS	0.8	116	44	1553.6	250/350	3760*2260*2200	≤86±2	6300	DN125
	1	145	41	1447.7
	1.3	188	35.5	1253.5

Presentation of all aspects

 

In our product showcase, the air compressor stands as a testament to our commitment to precision work for better quality. Every component, from the robust motor to the intricate valves, is crafted with meticulous attention to detail in our specialized workshops.

Our factory utilizes advanced machinery to craft high-quality air compressors. Laser cutting and bending machines shape and form the components, while welding machines build a sturdy structure. Spray booths, pipe cutters, and benders refine the units, and test equipment ensures they meet our strict standards, all supported by efficient forklift handling. This sophisticated setup guarantees precision, durability, and reliability in our products.

Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our factory integrates advanced machinery to craft top-quality air compressors. Laser cutting and bending machines create precise metal components, while welding builds a durable structure. Test equipment ensures performance and safety, spray booths protect and enhance aesthetics, and efficient forklift handling streamlines production, delivering reliable products to our customers.

Customer testimonials overwhelmingly reflect high satisfaction with our air compressor products and service. Clients are consistently impressed by the durability and performance of our air compressors, noting their superior quality and suitability for various industrial needs. Ease of installation, impressive power output, and the smooth operation of our machines are frequently highlighted as key attributes.

Air compressors play a key role in many scenarios. In laboratory gas supply, they ensure precise and stable air pressure; in automotive spraying and metal stamping, they provide efficient power to improve production efficiency. In wood processing and rock drilling, air compressors drive tools to realize precise operation; in plastic production lines, stable airflow helps molding to ensure product quality. These application scenarios fully demonstrate the indispensability of air compressors in modern industrial production.

At exhibitions and customer visits, we carefully demonstrate the outstanding performance and innovative technology of our air compressors, allowing visitors to experience the advantages of their use in a wide range of industrial applications. From laboratory gas supply to automotive spraying, from metal stamping to wood processing to plastics production, the power and flexibility of air compressors were demonstrated in all aspects. Through on-site demonstrations and interactive exchanges, we not only enhanced our customers’ understanding of the product performance, but also collected valuable feedback.

  /* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

View More

Can air compressors be used for gas compression and storage?

Yes, air compressors can be used for gas compression and storage. While air compressors are commonly used to compress and store air, they can also be utilized for compressing and storing other gases, depending on the specific application requirements. Here’s how air compressors can be used for gas compression and storage:

Gas Compression:

Air compressors can compress various gases by utilizing the same principles applied to compressing air. The compressor takes in the gas at a certain pressure, and through the compression process, it increases the pressure and reduces the volume of the gas. This compressed gas can then be used for different purposes, such as in industrial processes, gas pipelines, or storage systems.

Gas Storage:

Air compressors can also be used for gas storage by compressing the gas into storage vessels or tanks. The compressed gas is stored at high pressure within these vessels until it is needed for use. Gas storage is commonly employed in industries where a continuous and reliable supply of gas is required, such as in natural gas storage facilities or for storing compressed natural gas (CNG) used as a fuel for vehicles.

Gas Types:

While air compressors are primarily designed for compressing air, they can be adapted to handle various gases, including but not limited to:

• Nitrogen
• Oxygen
• Hydrogen
• Carbon dioxide
• Natural gas
• Refrigerant gases

It’s important to note that when using air compressors for gas compression and storage, certain considerations must be taken into account. These include compatibility of the compressor materials with the specific gas being compressed, ensuring proper sealing to prevent gas leaks, and adhering to safety regulations and guidelines for handling and storing compressed gases.

By leveraging the capabilities of air compressors, it is possible to compress and store gases efficiently, providing a reliable supply for various industrial, commercial, and residential applications.

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

<img src="https://img.hzpt.com/img/air-compressor/air-compressor-L1.webp" alt="China manufacturer 160 Kw 220 HP Direct Drive 2-in-1 Double Screw Air Compressor air compressor parts”><img src="https://img.hzpt.com/img/air-compressor/air-compressor-L2.webp" alt="China manufacturer 160 Kw 220 HP Direct Drive 2-in-1 Double Screw Air Compressor air compressor parts”>
editor by lmc 2024-10-08